This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Dear all,I need to Print 10 Invoice Numbers like Sl.no and Invice number.Here the serial number means ,Normally 1 ,2,3,4,5,6,7,8,9,10 .......Etc.Is thr any FM or Table or Hot code how can i give the condition to this.Thanks in advacneRegardsraj.
Hi all,I am going to add one new field in existing table control ,which already contains nearly 20 fields, so my field should be21st field,here when I am going to add new field , I need to add the field from work are from the same program. So , I am ...
hi,Can any body send me the logic for F-37 (Downpayment Request Creation) BDC AND F.13 (Customer clearing ) bdc.as i am very new to this.Thanks in advance,malathi..
Hi Experts,I am looping across field symbol.Can I use collect statement?Currently it gives me a runtime error.Below is the code for the same:Loop at <fs_f1> assigning <fs_f2>collect <fs_f2> into <fs_f3>. " This gives an errorendloop.Please sugges...
Hi all,Is there any option by whcih i can change the field font and make it bold using write statement?Thanks in advance.
Hi gurus,pls help me over creating bdc for data upload through excel for BOM creation and if code be given as i have not worked on table controls earlier in bdc how to do that.
Hi all,Our Req is to track the changes in the infotype records which are valid as of today. The Receiver system would hold only one record at any point of time and it is valid as of today. But the sender system (SAP) may have Future or Past dated rec...
hi, i have a select-statment: select * from bkpf INTO TABLE gt_bk where bukrs eq pa_bukrs AND belnr IN so_belnr and gjahr in so_gjahr. the...
Hi,I have developed a custom alv container using split container, however the top of page seems not to be displaying... Can someone provide sample split container with top of page?Thanks ,MawiEdited by: Mawi C. Ng on Aug 12, 2009 2:04 PM
Hi,I have a screen split into 2 containers using cl_gui_splitter_container. In the second container, i need to show a screen with few buttons on it. How can i put a screen on a container?Regards,Madhura Lobo
Hi GuysI am using the FM 'ARCHIV_CREATE_TABLE' to store the PDF file as archive in R/3. How ever I need to store it against a Infotype. Can you guys Guide me? Appreciate your Help!PS. I am converting the Xstring of PDF to Binary data.DATA lv_pernr TY...
hii have a vbeln. i want to create delivery . i'm using these :BAPI_OUTB_DELIVERY_CREATE_SLS and BAPI_DELIVERYPROCESSING_EXEC but i don't create delivery . you think how can i created delivery .Note :BAPI_OUTB_DELIVERY_CREATE_SLS created delivery ...
Hi all,I want to calculate the number of days between two dates using methods and classes. There are many FM's are available for this, but i want to use only class and methods, Please provide me with a suitable class and method for this.Thanks in adv...
Hi,I am new to SRM and I am working on SRM 5.0 My requirement is to add a text field for buyer's note with unlimited length similar to Approver's note in Shopping Cart screen.I have seen in the forum that many have done this earlier and i need step b...
Im triggering an idoc IDOC_OUTPUT_ORDERS immediately when i create/change the POHowever the idoc is getting generated when i change only certain fields.When i change other fields it does not get triggered.Why?-Dexter
Im triggering an idoc IDOC_OUTPUT_ORDERS immediately when i create/change the POHowever the idoc is getting generated when i change only certain fields.When i change other fields it does not get triggered.Why?-Dexter
Hi All,I have the ALV report, but now the requirement is out put should come in CSV (Comma separated value)format.So can any one help me on this one.
I don't have any issue, it's just for your information, as I couldn't find the question in the forum or sap notes.I wanted to trace the updates triggered by a dialog transaction (MIR4 in my case, but this may apply to any transaction, and even batch ...
Hi,We have a problem inserting a document into a node of the tree of a record. When a user save the record or changes any attribute, we need to validate the record state. If the state validation is correct, we have to add a document that exists in co...
HI ,I generate test class and i get CLASS-METHODS: setup and in this class i want to do the preparation i.e. call to the container one time and use the variantsin the appropriate methodsHow I can call from the methods to the class method data ,its ...
Hi ,I am using BAPI_ACC_INVOICE_RECEIPT_POST for vendor invoice posting, I have made the header , and account paybale table, can any body give link for the sample code or give me sample code.
Hi All,I have a concern regarding using tabstrip control.I want to display a report with tabstrip control with one tab as Summery of the report and other as Detailed description of the report.I have created a tabstrip control with function type as P....
Hi all,I am facing one problem while updating ecc4.6c to ecc6.0/In 4.6 one statement isData:zos like zo_ss where zo_ss=transparent tablezob-taskNo = zos. where zob is trasparnet table .But in ecc 6.0 its giving mutual convertible error.Kindly help...
Good morning all,Me was given a task to develop a simple data read between C and SAP. To foreshadow my prerequisites: I did not work with SAP and only have the possibilities of the NW7.01 Trial with a MaxDB database.I will use the RFC_READ_TABLE and...
Hi,I am programming generation of the Excel document from ABAP. I created additional popupscreen where the Excel should be shown with the generated spreedsheet and I have following questions:- I used the example program SAPRDEMOEXCELINTEGRATION2 as a...
hiI am trying to insert values from a deep structure into a database table.if I have a structure xixi_stvalues which has id which is of type char7type of type char20results of type xixi_ttresults <- this is a table, implying that the xixi_stvalues is...
Hi Gurus, I've a requirement where in , I'm supposed to create 5 radio buttons.1. Upload an Excel File2. View the Excel File3. Compute Data4. View all the computed data till date5. Enter a new profit center Each radio buttons have diffe...
Hi Experts,I am developing a interactive report used Set-PFstatus '100' , AT user-command and At line-selection in a single program.Here At line-selection is not working but at user-command is working fine. After commenting set-PF ststus '100' event ...
Hi,Messages has been added in a message class. I must insert this messages in an OT. How do this?Thanks in advance for your help.Xavier;
Dear experts,I am facing an isue with IDOC setup.I have a standard Message type and an IDOC type (Basic type).After doing all the necessary stups, I am unable to see in the IDOC the link between the Basic type and the Message type I assigned WE82, WE...
Hi , This is my requirement is there any example program for this requirement Please help me.requirements is to have a program developed that will be able to: Search for material batches with zero quantity in them automatically When ...
Hi All,We have a requirement to send customer master (for newly created ) to legacy system, for that we are using change pointers method,my question is : they need only some specific fields to send legacy system, so how to send those specific fields ...
Hi Experts,I have used the concept of dynamic internal tables to select data from COSS/COSP for e.g.database tables.Field symbol of type " ANY TABLE" has been used to select data , as the dynamic structure is assigned directly to the field symbol.To ...
Hi,Given a business object type (e.g. BUSxxx), is there any Function Module that can be used to get the table name for that object ?Have been through the SWO* FM's but did not get anything yet.Pls let me know how this can be done.Regards,-Kev.
I have a question that i generate the ALV report, the first col is a checkbox for selectionI have to do is ..... (the alv report is just like the below)e.g.selection | email | name | name 2- - - - - - - - - - - - - - - - - -...
Hi,I have a requirement to create table without primary key.It shows error when i create table without primary key.Can anyone help me to create table without primary key.Thanks in advanceRegardsShanthi
Hi every1,we wanted 2 fields to be added in fbl1n. for that we have already implemented SAP note no.112312 and created FM ZZ_GET_GKONT, all settings have been done in Bussiness event.now the fields are appearing in FBL1n.. but values are not coming i...
Hi ,I have coded an error message for my form by using below syntax.MESSAGE ID 'Z0' TYPE 'E' NUMBER '999' WITH 'Please maintain cust pricing grp 34 for' wa_zmas-matnr .It worked fine when i try to display the form with an error message in tcod : vf03...
Hi Experts,Good Day!I would like to ask some help regarding a workflow the problem is the "user received the workitem however user claimed that he is not supposed to receive" that is why i would like to know who are the agents dedicated for these ta...
Hi experts,I have an alv grid some records, and also i add an extra button to display selected records. When i display the selected records, it goes to another screen.(200) at 200 screen i have two buttons at toolbar( not screen) , next and back. i w...
Hello SAP gurus,I need to find the changes made to my Z table between two specified dates.I can find it using FM DBLOG_READ_WITH_STATISTIC.But if the user updates teh same Z table through a report which uploads the data into Z table using a CSV input...
Hi, In table EDIDS i am getting error "Idoc not posted successfully" but in WPER it shows full detail description of the error.so can any body tell me which transperant table WPER is using for getting full Status message.Thanks RP
HI,i have to delete entries from Z table and i want to verify 2 things :1. if the entry is update by another program do i need to use the lock concept ?2. if the entry updated by user when i want to lock the entry i want to do loop and wait until th...
I have a requirement which goes in the following steps:-> Create order-> Create delivery (Don't do PGI as of now)->Create invoice for that order-> Do the PGINow a particular doc type this invoice is blocked for posting (i.e creation of accounting doc...
Hi,I want to put a new line before the main window of the 2nd page.For the 1st page it is not required.Can u suggest sum ideas?thanks.
Hi Experts,iam trying to send the report output by an email to the user by using the FM SO_NEW_DOCUMENT_ATT_SEND_API1.Email is coming successfully with the excel attachment.but the problem is if i open the attachmentthen all the data is appearing in ...
How can I implement a listener for a click on ALV.If I click on my ALV grid, for example PBA should be triggered. Is that possible?Now it seems that nothing happens when I click on ALV.Can anyone help?
Hello everyone,Can anyone tell me how can i increase the font size of the text entered in the text field of a screen (in layout)?Thanks for writing back,Regards,Lucky
I am using reuse_alv_grid_display to display alv report..I am having around 90 fields to display.. some fields are large ..When i click export-->local file.. dump error occurs..It saying field symbol has not yet been assigned..The termination occurr...
Hi guys!I've regenerate views screens and try to activate cluster view: have such error.Error changing screen (screen was not changed) Message no. SV597 Diagnosis The flow logic of the screen of screen is not that of a generated view maintenance lis...
| User | Count |
|---|---|
| 5 | |
| 4 | |
| 3 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |
