This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
hello folks i'm having a dump because i can't open the dataset, but when i use this codeopen dataset p_file for output in text mode encoding default message mes.if sy ne 0.message mess type E.endif.the error is triggered but if i use:TRY. OPEN ...
Hello,I created a determination with the pattern "create property" in business object EHHSS_INCIDENT. I want to make a field mandatory for a the Incidents... not for the near miss or observation. Right now, the field is always mandatory. How can I do...
Hi Gurus,I have a requirement to create transaction codes for sap query reports. I found two ways to create transaction code for sap query report1) By Generating program for sap query report and creation of transaction code for that generated Progra...
Hi,Is there anyway to get the SD_SALESDOCUMENT_CREATE call to create an order, but not confirm the qty (don't do the ATP call). This would need to occur regardless of whether there's availability or not.I've tried setting the confirmed qty to zero i...
Hellowe have Z_Order ABAP program which load order to SAP, we need to run a DOS program to get file to the correct folder.Is it possible to run this DOS program every time user run Z_Order programThanks
Just think that i take two values in two different line in sequence up and down in smrtform.and i want that when first value absent then second value take place and there is no gap at upper side. how to do just give some solution. Thanks in adva...
Dears ,There is a need for me to access the line Item Texts information in any of the user exits while saving the delivery .I tried user exit MV50AFZ1(SAVE_DOCUMENT_PREPARE) , I am not sure what structure carries the line item information .Can any p...
Hi all.I have a problem wuth the job SEND SAPCONNECT INT, from time to time, strats geting STACK_NO_ROLL_MEMORY, if I run the job fom SCOT, it starts working ok.I found this thread, and in it, refers to note 828857 - Dump SYSTEM_NO_ROLL in send pro...
Hi experts. Sorry in advance (dunno if it is correct place for this question)!I have created add-on installation (It works correctly 100%, already was implemented).Data base on current system was restored and now when I try to install this .pat file ...
Hello all,I copied the standard form F140_ACC_STAT_01 and made few changes. But in my form the item table is not flowing to the 2nd page.I even maintained one static text in page 2, even that is not getting printed.can anyone please look into the abo...
Hello ,Now I need to post the delivery no., and the same time I need set the default batch number. How should I do?Only create the batch number when PGI, not create batch number when save delivery.Can you offer me the user exit/enhancement/BADI? I ne...
Hello Expert. I need to be able to create and change PO data from text file. For this i parse data from files, then I manually maintain segments for idoc, and then I send it by CALL FUNCTION 'IDOC_INBOUND_ASYNCHRONOUS'. So, for PO create I have no pr...
Hi,Is there a way to find the import parameters and their Data Type of a Function Module in any Table??For example, i know i can find the name and the include of the Funtion Module in TFDIR. Is there anywhere i can find the list of Import Parameters ...
Hello All,Is it possible to execute SQL statements like :1.Show parameter compatible.2.Execute immediate 'alter database rename global_name to TA1.WORLD' into sOut;with Native SQL.If yes, Can someone provide me examples for the same.Thanks and Best R...
Hi, I'm programming in an SAP ERP system, and try to get some equipment releated information from a partner IS-U system. In particular I would like to get an equipments full address data from the IS-U system. Now, I found the BAPI with function modul...
Good morning gurus.I have a problem .After generating a report in FBL3N I try export to excell ,then I click in LIST ---> EXPORT ------> SPREADSHEET.Then my user configured the scrren :Then when execute occurs a dump (see attached)The error says:| ...
Hello,I'm consuming from SAP a .Net web service, one of the properties the web service returns contains a base64 BMP image and I want to decode it and put into the BDS.The problem comes with the base64 image, I don't know who to convert into a binary...
Hi,To post a Journal using BAPI_ACC_DOCUMENT_POST, I could't able to figure it out the below fields in the BAPI Tables (BAPIACGL09, BAPIACAR09,BAPIACAP09, BAPIACTX09, BAPIACCR09, BAPIACKEC9, BAPIACKEV9, BAPIACEXTC, BAPIRET2, BAPIACPC09, BAPIACCAIT, B...
Hello Experts, I am trying to load product groups. Tried using stadard IDOC LOIPGR. Not able to use it since it does not have a process code defined.Can you please suggest any other standard BAPI or Batch Input program to load this.ThanksKishore
Hi All , I need to get cost center amount like in tcode S_ALR_87013612 , please can any one recommend table to get that value .thanks.
Hi There,Is there any way to take the filed name from SAP data dictionary during run-time . I mean if i will execute a TA the field name , program name (like what shows pressing F1) all the details.Any help is appreciated.Regards,Khagendra
Can CG3Y and CG3Z transactions be used for import and export of ABAP source code between 2 systems which are not in same network(No connection and in Different countries)?Thanks in advance for the information.Thanks Regards,NarsiReddy Cheruku
Hi Everyone, I have a requirement to print smartform in English and Spanish. I tried to translate the smartform using SE63. I gave the soure as EN and Target as ES and clicking on Edit, I am getting the target as English only. There is no tran...
Hey Experts,I plan to make an ABAP Certification (C_TAW12_70).Does anybody know wher i get free documents to prepare for the Test?And which documents would be helpful?Thanks.
Hi experts,I would like to do something like this with the use of field symbols:LOOP AT lt_test INTO ls_test.<field1> = ls_test-variant. *Field variant contains name of the field which also exists in the structure ls_test and that field have a value...
Dear Experts,I want to store documents uploaded in SAP screen to external ( non-SAP ) system.My First question:In terms of document storage what is the difference between GOS-> Create-> Create attachment and GOS->Create-> Store business document ?My ...
Hi Abap Gurus, I might have a stupid question for you guys but I could not really find the answer in google cause key words are used in many cases and it is different to find a proper topic. During debugging I found the following sentence:if ( not hd...
Hello Guru's,My requirement is to make GL accounting screen feild(MEACCT1100-SAKTO) non editalbe to user based on Document type which is under account assignment tab strip.when i debug for same i found that it is handled using class cl_model_view_mm-...
Hi Expert,Please suggest while doing GRN manual excise invoice is captured but by mistake user changed the material type from Raw material to consumables and then after done part 2 and MIRO on January 2014 which result into system has captured 50% ...
Hi,I am using HU_PACKING_AND_UNPACKING FM to do inbound delivery packing.But after FM execution line item does not get cleared from VL32N Pack option (Shift + F6). If we manually do packing through VL32N , then line items under "Material to Be Pac...
Hi Guys,I want to make a macro enabled Excel sheet which i can use to upload huge data on SAP . I read some discussion but didnt get anything. Please help me with a step by step document.
Hi All, I use SAVE_TEXT to save long text to projct，But I am uploading the long text using SAVE_TEXT function module I can see the data in STXL table and i can use READ_TEXT to get the long text but the Long text data is not diaplying...
Hi,What is the purpose of costum t-code of table view(ZSE16N)..? SE16N itself is a display t-code and the table restrications are done through S_TABU_DIS and S_TABU_NAM configeration..
Hi everybody,Customer wants that whenever an organizational unit in OM is created the SHORT field has to be mandatorily in capital letters. We are programming this in method AFTER_INPUT of BADI HRBAS00INFTY. We have just triggered an 'E' message when...
Hi All,I have a requirement.At the time of Saving the document if the net value is 0 then it should not be saved.I am searching for some appropriate BADi.Does anyone having idea for this?
Hi All;I have to add a new data type to the orijinal program.I created a new implemantation,butthe field didnt view on the field catalog and the lines are red.How can I define the data type correctly ?Can you help me ? The screenshot is like below;Be...
Dear all,I have an issue and I don't know how to fix this ...We have a Z-table that should be maintained by some key-users ... This table contains a few fields : MANDT, KUNNR, WERKS, PARVW and PERNR ...The fields KUNNR and PARVW should only get some ...
Dear EXPERTS,As I am new to ABAP, I am struck in a problem.MY requirement is: To upload an .azt file (Multiple possibly), split it for further processing.My Problem : I am able to select multiple files from the Pop up folder dialogue but I am not abl...
I have a requirement for validation of XML file against XML schema(XSD format). Using IXML liabrary I know how to validate XML file against schema in DTD format. But i am not getting how to do it against XSD. Is it possible using IXML liabrary? Also ...
Hi all,I create a file XML "Invoice" but I have problem with special characters.Special characters should not be in the XML fileYou have code for resolve it?You have a function or form for to remove special characters?thanks in advanceMarco.
Hi Experts,I have requirement to get the document number after posting asset through ABAVN tcode.I have found that in bseg table,but selecting the data frombseg table takes more time.Kindly any one advise which table stores the document number for as...
Hi,When downloading ALV output to excel, the headings the getting truncated. Program is using CL_SALV_TABLE for ALV processing. Can any one help on how to fix this. In general fieldcatalog there is a field - DDICTXT by which we can pass 'L'/'M'/'S' ...
Hi We have requirement , where we have to pass some fixed text to notification's long text when notification is being created by TCS service order(Tcode- iw31). Is there any exit/bapi/ fm to achieve same?
hi experts:today i get a program:report ytest_table1.tables:proj.form frm_f1. proj-pspnr = '12345678'. endform.report ytest_table.form frm_f. tables:proj. if proj is initial. endif. "breakpoint1 clear proj-pspnr. if proj is initial. endif. "...
HelloI use RSLG0000 with submit and "Exporting list to memory and return". If I start the report with a system user, it ends with runtime error "sending a dynpro ". If I change the User to SERVICE it runs fine. Is there someone with a good idea.
Hi,I implemented the sap note 741385, but while performing GR getting dumpI unable to figure out why the EXIT_SAPLEINR_003 has been called, please find the following run time error .Runtime Errors CALL_FUNCTION_PARM_UNKNOWNExcept. CX_S...
Dear All,I have an issue in which i need to capture all the sales order in which change has taken place in a given day.I have checked CDHDR & CDPOS but they arent helpful as they are not updated when there is change in status of sales order.Could you...
Hello All,We have an EDI solution for receiving orders and currently I manually monitor the failed idocs using BD87 and a variant to display all idocs having error status codes between a certain date range. Would like to automate it in such a way I r...
Hello folks, I have created a custom search help for a character field in SE11. It also populate date field when we press f4.Now when ever i try to overwrite or change the character field using f4 option i am getting an error message 'Ente...
Hello Gurus,Someone please can help me to convert the table that is return by the function LIST_FROM_MEMORY into ascii with a field type C larger than 250 characteres?call function 'LIST_FROM_MEMORY' tables listobject = it_listobj ...
| User | Count |
|---|---|
| 6 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
