This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Hi all,I have a Z transaction in R3P that was created by someone directly in that environment (never created in R3D or R3Q)...I have been asked to recreate it in R3D and then transport it through the landscape. I have never written an ABAP program o...
Hi All, My requirement is to create a long text in Transaction, after that we may need to change it and read it using the function modules CREATE_TEXT, READ_TEXT, EDIT_TEXT function modules.could you please tell me how to do it in step by step.its ...
HI, I am working on FI report, where i need to calculate the G/L account closing balance on a daily basis, which will be used as the opening balance for the next day, please help me out with some sample report or logic to claculate the closing ba...
FUNCTION Z_BC_INSERT_DATA.Hi Friends,I have created RFC function module for transfering data from one client to another client or from one quality to devlopment as well but now i m getting error in inserting data to target table as both taget table a...
Hi all,I have an editable ALV grid on which there are open date fields for editing. On the ALV if user changes a valid date say 04/30/2007 to any invalid date say 04/31/2007 then the program automatically displays an error message box. I have two iss...
Hello, In my workflow i want to make one workitem obosolete if the workitem is not processed for 1 day can anybody tell how to make it as osolete. were to to set the number of day or hours or minutes?how to to solve this?Regardssrinivas
In the alv display which i get after executing Standard tcode CO03, i want to add two columns to this.How do i do it??
Good morning all,I want to get the date, three month after today.Any function or way?Thank you.Deniz.
hi,alli have to check the material availability before i submit the transaction 'MFBF' to backfluch some products, so i use the function "CS_BOM_EXPL_MAT_V2" to extend the product and make a check, then i use the BDC-PROCESS to call the transaction '...
i have faced a run time error decribing that "abap program lines are wider than internal table.the internal table is 72 characters wide and prog line is 87 chars wide."i am unable to find the error.plz help in this issue.
hi ,can anybody tell me how to write the code to check if any new entry exist in the table since the last run.Thanks,Loveena
what is include<icon>.Why we r using this. I saw this in an interactive report.
Hi,I have a problem about ABAP programming. As follow:data: txt char(20) type c.txt = 'text_vol '.Now I excute these codes in SAP abap workbench. The result is: txt= 'text_vol'. The blanks follow the 'tex_vol' is condense by system.How can I perform ...
i created a BAPI and registered in BOR then what is the procedure to call that BAPI method from NON-SAP like .net or java give me the procedural steps,that will be help fullthankskrishna
Hi Friends,Can anyone tell me how to assign a transaction code to a maintenance view, please?Thanks in advance.Best RegardsJoe
Hi,Can we use RFC for connecting non-sap system ( NOT USING BAPI ).Regards,Raghu.
Hi all,I have a requirement to call the selection screen of EKKO table with a default set of parameters from a report.On call the selection screen should always have the default fields of EBELNBUKRSBSTYPBSARTBSAKZLOEKZ The option i could think of is ...
This is the error that i get when i added new fields to a custom table with field length 400.(This refers to one of the field added).Field CLOCSTATUS is too long (Specify a length between 1 and 255) Please help
Need help for my requirement... Hello Experts, I have report where users can input the company, housebank, account ID and posting date. Now in one column of my report named 'Cash in Bank', I need to get all postings from cash accounts with GL co...
for only one user , we want to give access permissions for a particular client & not to other users. & we want to customise users authorizations & give them approporiate access permissions.
Hi ExpertsWhat are client dependent transports. Are the objects created in one client accessible in another client.Please comment.
hi sdns,i am new to OOABAP.I am being trained on this concepts.I am facing a lot of difficulty in understanding Narrowing Cast & Widening Cast.I have some doubts in that.i have a doubt in widening cast.I Know that we are increasing the scope with the...
Hi i want to extend material master(MM01) with some extra attributes. For this i've already created a subscreen, now i want to save these additional values into a 'Z-table'. Now if i use customer exit (while saving material master) then i'll not get ...
HI everyone!Can someone point me to the right links, give advice, or even sample programs, on how to create a formatted Excel output from ABAP? I need in particular how to set the format of each cell, or range of cells, like the highlight, set it to...
Hi all,I have to do a report. Now in the display, I have to apply Authorisation on some particular fields(columns). If user A runs the report he can view all fields in that dispaly,while if user B runs the report he can't see 3 columns of dispaly. S...
Hi friends,I have used a logic in RV61AFZB,USEREXIT_XKOMV_BEWERTEN_END,in which the condition category is forced to L.using codeIF SY-TCODE = 'VA01' OR SY-TCODE = 'VA02'.LOOP AT XKOMV.IF XKOMV-KSCHL = 'ZPR0'.XKOMV-KNTYP = 'L'.ENDIF.MODIFY XKOMV TRAN...
Hi folks, How to Create new pricing condition ZDSD based on ZDSC and i have to Add pricing condition ZDSD to pricing procedure ZGDLS, using pricing requirement , base value on ZDSC ...
pl reply about all movement types
Hi Gurus, Can anyone tell me how to assign transaction code to SQL query?Thanks in advance,Regards,Supriya
sirwe want to fatch the data in between date of table bkpf and field name is budati m write a query select * from bkpf into bkpf where bkpf-budat between 20.08.2007 and 20.10.2007.but it is not executedplz correct this queryritu
Hello Friends,I have the requirement that I have to pass the internal table to another report program which will run in background. So, can you please tell me how to pass the internal table in submit report program.I am using the following statement ...
Hi all,Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possiblepoints will be awarded.thanking u in advance,srinivas.
Hi all, Can any of u give me the procedure or the code snippets to write a program so that the smartform which is designed has to be converted into PDF doc and has to be sent as a mail to the intended reciepient.Welcome for points.Regards,Ravi ...
hi experts, i have written a simple report for showing the payroll data but here the employee basic salary is coming but the payroll data is not coming plz help me to short out thie problem.......<b>code:::</b>&----*& Report ZHR_DISCO...
Hi All,Yesterday i submitted a query regarding Interactive reports.and i recieved lots of reply .But the replies are all about ALV interactive report.I want to know just about the interactive reports where ew use AT LINE OF SELECTION, HIDE e.c.PLZ se...
Hi all,I want to read only those two records given in lower limit and upperlimit of select-options.pls help me ....points will be rewarded..ThankYou,Prashanth.
Hi, could u pls tell me how do I enable/disable selection screen block written below based on radio button selected??Block to be enabled / disabled :*----APO Version and RFC destination blockSELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-01...
Hii have performance issue with RBAPP01, volume of data is receving from the people soft but performance is extremely slow and causing a delay to employee vendors being updated with the correct information. The problem happens only when the data volu...
Hi,I am facing a strange problem in creation of PO through "BAPI_PO_CREATE1".In the Item condition internal table, I am passing the condition types.The PO is getting created successfully.Eg. I pass conditions and their values as follows:PB00 : 1000ZB...
HI, I JUST COMPLETED MY COURSE IN ABAP. I WANT TO PUT 1.5 YEARS EXPERIENCE IN ABAP . CAN ANYBODY SEND SAMPLE RESUME FOR 1.5 YEARS EXPERIENCE? FOR 1.5 YEARS EXPERIENCE ,WHAT QUESTIONS GENERALLY ASKED IN AN INTERVIEW ? AND IN WHICH TOPICS I N...
How are the login parameter values affected on an SAP server when SSO is implemented? For example if the authentication is being done on a Windows server which has the values set to change the password every 40 days and on the SAP server the login/pa...
Dear All,Can you please help me on this..My company wants two addresses to be maintained for each plant,Suppose new address aplicable from today say 24.10.2007, so all the billing documents start from today print new address and others before ( my me...
Dear all: i want to find the table including username and agr information, then output the user with all his agr, but i can't find the releated table, anyone can help me.Monson
hello sir, plz tell me the syntax of inner join for three tables.
Hi,I have two tcodes FB02 and FBL1N, i have to remove the link between these two tcodes.How to do?
Hi, we need to give posting key for the transaction but by using this bapi where to give this posting key in this bapi and for which transactions we can make use this bapi please give information
hi friends, i am using factory method to display my alv, in that all the columns of my internal table are displayed,now where to change the field catalog so that i can remove those columns which i dont want to display t...
Hi , is there any bapi available for this please send some informationnaveen
HI Friends,I am using the BAPI_PO_CHANGE to update the IMKEY field in EKKN.I have passed the value got from the input file into the parameter name POACCOUNT in the BAPI. the IMKEY field is there only in the POACCOUNT parameter.i have even passed the ...
We are trying to print Barcode from ECC 6.0 system but unable to make it ,though we can view the same in Print preview , still we are unable to get the samein the hard copy.Barcode is not present in hard copyBelow are settings Device type: SAPWINDevi...
| User | Count |
|---|---|
| 6 | |
| 3 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
