This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Dear Friends, In my program i am using the following statement "SUBMIT AQZZ/SAPQUERY/H2STAFF_CHANGES2 via selection-screen ". my program is working fine. But if i check the program using EPC check its showing " SP$00010-LOW is not a parameter...
Hi,How to get a popup before File saving and File open in an executable program???
From the first screen in the GUI, I'd like to pull in a live web page to fill the right side of the screen (where the big SAP data graphic sits, next to the left hand navigation). How is this done? I've seen the University of Nebraska's GUI and they ...
Hi,Can some one please provide me some of the comman errorsand there solution which are faced while Unicode upgradation???????
Dear friends, I have created an alv report which uses the selection criteria in the selection screen. If am executing the screen a report is generated(Primary report) and from the primary report based on the selection made the "STANDARD REPORT" is c...
Hi,How can I change a purchase order creation date (EKKO-AEDAT) using the BAPI: BAPI_PO_CHANGE.What should be the input values to the BAPI ?Thanks in advance,Rotem.
Hi,AllHow can I modify data from a Transparent Table (like TCURR), and important thing is I want do all that with no ABAP code here. It is like that we always do that in a Oracle database use TOAD or PLSQL third party tools, with no script code here...
Hi everyone,I'm trying to create Assets through BAPIs, but the assets I have to create have Z fields that were added in table ANLU.The Bapis I found are:BAPI_FIXEDASSET_CREATE1BAPI_FIXEDASSET_OVRTAKE_CREATERA_ASSET_MODIFIKATIONI'm not sure if these b...
Hi,I've to insert the bank account into a customer/ vendor with BDC , but i can not delete it with BDC ( because a customer may have many bank account the same time with different vbtyp ) . So is there any function that can delete/ insert bank accoun...
I created a new infotype 9015. It works and posts correctly. Then I tried adding a module within the 9015 code to generate an infotype 0014. So the end result should be a 9015 and a 0014 record. While Im in PA30 I can see the expected results but ...
Hi everyone.I need to select distinct AUFNR OBJNR from AUFK for Plant in select screen and Order number in Selection screen.Next I need to select the Orders from the above list with system status (TJ02T-TXT004) in the selection screen into another in...
Hello experts.I need to call a Batch Input within a RFC Function. I heard that approach might bring some problems, taking into account that the RFC function must act as a Web Service for a .Net application calling.Has anybody came up with a similar s...
hi, i'm trying to create a sales order using the bapi BAPI_SALESDOCU_CREATEFROMDATA1, like this: DATA: v_header_in LIKE bapisdhead1, v_detail_in LIKE STANDARD TABLE OF bapisditem, v_wadetail_in LIKE bapisditem, v_sales_prt...
Hi,I have generated table maintaince view through se54 in ECC 6. I am able to see entries in ECC 6. When I transport the same to 4.6 I am not able to see the entries in 4.6c Please help me on this.Thanks in Advance.Thanks and Regards,Venkat
Hi everyone,In screen painter, I would call the current screen before output module. But it tells 'the statement is not accessible' when I active the programme. What's the problem? Thanks!!
I have data coming inbound in EDI 944. This data is supposed to come and post as a good's issue and creating a material doc. number in the process. The reservation number and reservation item number field in my IDOC are blank. So, I fill them up in a...
I have one bapi function module called /AFS/BAPI_GOODSMVT_CREATE.I have declared internal table of structure as /AFS/BAPI2017_GM_ITEM_CREATE.I am passing storage location as '0001' into my internal table but it is taking this as '1'Finally i am getti...
Hi Experts,i created a lock object for my ztable and this ztable is using in ZFM.when i create, SAP generates two FM's ENQUEUE_* and DEQUEUE_*can any one give me some idea how to use these FM's in my ZFM whic access tables directlyGiri
hi,i am having an issue in populating the idoc according to it's hierarchy.my idoc segments hierarchy is as follows:segment1 (min 1 - max 1)segment2 (min 1 - max 99)segment 3 (min 1 - max 99) segment 4 (min 1 - max 99) " this is child of segment ...
Hi,I want to change material components UOM & quantities in Material tab.How do achive it by exits.RgdsPraveen
Hi,I'm working on ECC6.0 environment. I would like to activate the Index M03(given by SAP and the status is New) on VBAP table. When I tried to activate its giving me a warning message saying "M03 is not in customer name space" and its not getting ac...
Hi all,i had got a table control with 4 fields,, orderno item material quantitywhen i click the button 'DISPALY' it dispalys all the record from ztable , that is fine , but my requirement is when the user enters say orderno ' 5 ', in the input/o...
Hi,my problem is:1. use fm CS_BOM_EXPL_MAT_V2 to get BOM data.2. I modify the BOM using a Batch Input3. use fm CS_BOM_EXPL_MAT_V2 to get the BOM updated.the FM in the 3th step load the old data and not the updated BOM.Any suggest?Can i clear the prog...
Hi Is BAPI available for ME32K?Thanks in advanceWith regards,Malli B
Hi, I am trying to add the custom container in the required place, but when i was executing the logic it was occupying the whole screen. Lets take in the first half of the screen i need to display some fields and below of them i need to have A...
Hi,1. What authorizations a user needs in order to reset password of the standard users "SAP*, DDIC, J2EE_Admin, etc....."?2.How can I add RFC authorization only for a user to be able to open an RFC connection (for testing I used to give the user SA...
Hi all,I hope you can assist with this. I have written a function module which in turn calls BAPI_FIXEDASSET_CREATE to create an asset. I have executed it via SE37 and it works fine. The code has gone to a client and they have incorporated this funct...
Hi All,Is there any alternative BAPI available for BAPI_GOODSMVT_CREATE to create material document for a goods movements one a time . Actually my problem is that i am inserting this BAPI in one function moduleZQM06_FM_TASK_GOODS_MOVEMENT for transac...
If so what is the quickest way to code it? I am restricting a batch in an interface. In the same interface I unrestrict but it does not work. I am using BDC. I am thinking I may be missing some syntax for open close in my BDC. Thank-you
Hi guys.Can a field from an append structure be part of the key fields?Regards.wm
I am restricting/unrestricting batches via an inbound interface using a BDC for MSC2N. It seems I cannot retsrict, then unrestrict in the same session?I am using commit works.If the first record restricts the batch, that works, then a second one unre...
Hi,I have a string with this content:,field, field, fieldI want to remove the first comma, not the others, How ?
Hi All,we have one issue while downloading the file to localfile. we want to download a fileSE16> execute> it displays all tables so i wanted to save teh file as localfile to my desktop.I am going to system> List> Save-->Localfile.this tree is disabl...
Hi,Can anyone explain about this FM HRCM_STRING_TO_AMOUNT_CONVERT.give an example for this FM.before post check all related post to this FM, but did not find an example.iam trying something like this * IMPORTING * VALUE(STRING) ...
Hi guys,I have a class in SE24 (ZCL1) in which I have created an interface (ZIF1) that has a method A (set start parameters).In the class constructor of ZCL1 I am calling that interface by doing:call method ZIF1~A importing...Then I have a second cla...
Hi champs, I have some requirement.I have one internal table which contain 4 columns .out of which 3 has some numeric value and first has some letters e.g A ,B,C etc.Now suppose i have 20 rows in itab in which 10 are A 5 are B and 5 are C .Now as c...
hii have a folder on presentation server with some files (excel files and text files)now i need to upload all the files at a time by calling the transaction in my program .thats why i have used like this PARAMETERS: fr_fil type rlgrap-filename DEFA...
Hi , I have to bring in data from a view created in FIDO into my ABAP program . The database is oracle. I am trying to use basic forms of native sql embedded in my code to retrieve the data , but I get a short dump stating that the table does not exi...
Hi All,is there any function module using which i can get all the attributes values of a business object, I am using BUS2081 and by providing the key can i get all the attributes ? please help.Regards.Sunita
HI,i need the table which had link between mblnr(material doc no)and belnr(miro document no)i need helpregardssiva shanmugam.A.V.
Hi all,I never done a workflow,..I have a basic requirement,.. in VF01 , when an invoce is created, that is after the save button ( after comiting to the database ), i need to push the details to an excel sheet. I do not have a user exit nor badi. Co...
Dear All,Any idea about how to send multiple material in our own message type,In my outbound i have created a message type but able to send only one material through program. If i give range of material its in error status 26 in WE02 and failed to se...
Hi,I want to create a table of the following layout :ATTRIBUTE Text Key Description 12 B 13 C 8 D 0 F 8 G 8 G ...
hii have to retrieve values from a line after a separator commahow to do this?
Dear All, i m using a bapi 'BAPI_DELIVERYPROCESSING_EXEC' for creating the Delivery.in this i m passing the 'Batch number' (BATCH type charg_d) also.it is creating the delivery..But it is not updating the batch number .With out Batch Number ...
Hi,I got new requirement ie I have to copy reports from ECC6.0 to 46B version. While copying I faced number of issues and I am not clear for below one.concatenate i_result1-result p_delim into i_result1-result respecting blanks. ( this is in ECC6.0) ...
Hi Everyone. I'm supposed to release a serviceentry via a BAPI namely:BAPI_ENTRYSHEET_RELEASE.Due to the fact that our system doesn't use any strategy and soforth; the BAPI won't release the service entry.Can anyone help meThanks in advanceLars Berns...
Hi Experts,when I am creating any material if number range is already define in SPROthen material number is automatically generating , but I am not saved the new material which I have created . and I again I create new material then next number is g...
Hi,I have a requirement in which we need to create a file and send it to 3rd party UNIX system.We need to use sFTP(Secured File Transfer Protocol) for the same and XI is not involved in the scenario.Pls help me with the steps involved to build the sa...
wats the fm to upload file from the server?
| User | Count |
|---|---|
| 6 | |
| 3 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
