This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
I want to create shipment with the BAPI 'BAPI_SHIPMENT_CREATE';but anyone can teach me which field in the BAPI is for Transportation planning status? Usually,if we caeate shipment with vt01n,we can notice the field for Transportation planning stat...
Please use a more informative subject in futureHi,Can you show me the steps on how we can check if the particular OSS NOte has been implemented in the system?Edited by: Matt on Dec 23, 2008 12:17 PM
Hi, We are currently changing our Non Unicode based system to Unicode. My question is regarding the difference between Unicode and Non Unicode systems, I observed , when trying to save File using System>List>Save-->Local File. When we try to save the...
Hi, Gurus:Our ABAP report reads flat file, the file is created by a legacy system.Previously, it works fine.Recently, the each line of file ended with symbol '#'.We want to get rid of it, but not lucky:We have tried using replace it with '', and trie...
Hi,Do you if it's possible to implement custom code (add new functionalities) in new abap editor and new debugger, and how ? I didn't find any doc about that, nor any user exit, and it's impossible to implement implicit enhancement options as they ar...
Hi All,I am creating and deleting infotype 15 using HR_INFOTYPE_OPERATION.While doing this i need to bypass the securtiy check.How can i do this,can anybody help me on this?ThanksSiddartha
Hi, I have created one web service, they call this from .Net system. Here I am using one function module "QC01_BATCH_VALUES_READ" to get the Customer status of the material. Here the issue is, when I run this web service in SAP, it is returning the...
Hi,i am getting warning message: The exception CX_AI_SYSTEM_FAULT is neither caught nor is it declared in the RAISING clause of "Z_FM_PROXY_XI". TRY. CALL METHOD prxy->mi_sales_order_ob_asy EXPORTING output = output1....
I have a screen enhancement I have been coding the User Exit is activated. After cleaning up some unused transports my screen tab created by the screen exit is not appearing on the screen? All the code is still in the exit and activated?Wonder what I...
hi all,i have designed a program with three tabstrip, Fisrtly show an ALV report where I select a row giving double click and then show tabstrip to explore information, but when i back to return the alv report and choose other row giving doubl...
I want to use " CALL CUSTOMER-FUNCTION '005'" within the function module IDOC_INPUT_STPPOD. But when I click on INCLUDE ZXTRKU13, I get the error message: "Program names ZX... are reserved for includes of exit function groups". What must be done in o...
Hello! I've been tasked with adding security to a single tab (Payment Transactions) in XD02. Basically, we're creating a new authorization and if the user does not have a high enough level of this authorization, the information on the tab should be d...
Hello,I'm very new to abap and just managed to partly implement double click in an alv grid.I also created a button that calls the exact same function as double click (selects the row and fills in the data areas on the page). When I use the button, e...
I posted in the BW forum but did not get any help. I have a BADI that populates a virtual characteristic (enhancement of RSR_OLAP_BADI). This BADI gets a date variable value from the query. Can I send another variable value to the BADI? I want this b...
Hi folks,I have a itab with f1,f2,f3 fields. There are 4 records in the itab. I need to check whether the values of f1 column are similar or different in all the 4 rows. Please help me out.thanks in advance
Can I put my code in any part(implicit enhancement option) of a stardard sap code(va01)?For example, I need to move some fields from vbak to vbap in transaction va01.I founded the user exit but I need to use a new badi.Is it an obligation to use this...
I am creating a new Z** message class....when I am creating a message class It is asking me a package...I am a functional guy...and I am not very much familiar with Packages...Can anyone throw some light on package in layman terms ? and also why it i...
Hello,I have searched on forum already. But could not get ans.If main program & includes programs are in different package and if we created transport to main program. So,when we release the transport both program will gets transported to other serve...
I have a doubt, Does the new Enhancement Framework substitutes per complete the user exits?Or I need to use the user exits anyway?Please don't post a link.
Hi SAP Gurus,Does anyone know how I could save some output files on an ftp server from my sap program which will operate in background. At first I had made the program using GUI Functions but now the client talls me it has to be executed in backgrou...
Hi Experts,While Creating Purchase Order, I am entering material line item, in that account assignment tab, I am entering WBS element.Now I need a table where this WBS Element is store with respect to material, PO, PO created date.RegardsGanesh Red...
Hello,while using rp_provide_from.....1) what are the way to handle errors? what is use of pnp-sw-auth-skipped-record? pnp-sw-found eq 1 , means read...
Hi, I'm have the following doubt about the billing type restrictions. The thing is that I created a role that contains the transactions VF01, VF03, and other transactions, and also I restricted the authorization object V_VBRK_FKA (Billing: Authorizat...
Hi Folks,I want to restrict users to display only authorization for the Transaction Code "COGI". Please let me know the procedure to do this.Regards,Akshay
Hi Gurus!I have a program that updates two custom tables in sap based on the selection . My selectiuon criteria has 3 fields , the company code which is constant '1000' and the table identifier which will be either 1 or 2 based on which table to up...
I found EXIT_SAPLV01Z_002 that uses include ZXVBZU02. How do I track down the Enhancement Number it belongs to in SMOD?Thank-You.
Hi,When the delete flag is set I have to write the amount as '0.00', I tried the following with right justified but it is not working. The value '0.00' is comming to the left. How can I make it to display towards right.Thanks,veni.*lv_amount(5) TYP...
Hello Gurus,How do we find change logs for user creation, role assignements etc in EP 7.0? Thanks in advance.
Hi folks,I have to compare the fields value of f2, f3 in between rows of same internal table. how can I achieve this...Please help me out...thanks in advance
Hi ,I have to create a RFC enabled function module and it has to return a table. This table has to be of the format of a type defined in the TOP include . Right now when I try it ... it is only accepting data dictionary structures and not types defin...
hello All,I have created a function module in ECC6.0 and I need an internal table as a parameter but SAP will not allow it to be created as a tables parameter only as a changing parameter. How do you do this as a changing parameter. I am using struct...
Hi All,I have a program, which submits to another one, and the other program creates a JOB, for a Material Master update.My requirement is to wait till the JOB in the second program finishes.Is there a way I can wait for the job to be completed.Pleas...
My PAI validates a field. I want to be able to go back to the same screen if the validation fails. What is the syntax I should use in my Process After Input? Do I move a value to sy-ucomm?Thanks.
Hello All,I am displaying ALV using below code. TRY. cl_salv_table=>factory( IMPORTING r_salv_table = gr_table CHANGING t_table = itab_alv ). CATCH cx_salv_msg. ENDTRY. gr_table->display( ).Report executed in f...
hiSome of users don't have any menu, but user "user1" has a grest privilege, i must block him to execute the TCD "spro,su01,su22,fs00", How can i do it?How can i operate it in SAP ecc6?Coud you teach me step by step?I found "Authorization object S_T...
I am testing creating Sale Order from inbound IDOC with WE19.Partn. number = AAA001Partn. type = KUPartn.func = PYMessage Type = ORDERSProcess Code = ORDEI get message 51 "Error: Application document not posted" in IDOC status:VKORG, VTWEG, SPART can...
Hi Experts, I have BDC program which uploads data through transaction "CJIC- settlement of WBS elements".Issue is my BDC program creates sessions in SM35 and user processes this sessions in SM35.And Updation happens fine in SM35 sometimes and someti...
hi,i want to pass idoc number to bd87 screen through my program .i tried using the submit statement as there is no parameter id for sx_docnu field like this:lv_docnum =(having idoc number) r_docnum2-sign = 'I'. r_docnum2-option = 'EQ'. ...
Hello!I have a problem with ALV function. In ALV grid mode i see data correct, like picture 1.Picture 1But, when i click in print preview, it´s show me like picture 2.Picture 2When i select just QM number and QM type coluns, it´s show me ok, like pic...
Hi Experts,Currently, if the user do not enters any value in QUANTITY field, while creating a sales order(or even VA02 too) ..........we are getting a Warning message(VU001).So, I need to change it to hard error message type, am changing the message ...
Hi Guru's I need to validate in the Tr. MIRO if the Company code of PO and the Company code of the Invoice are same or not.I was looking for a BADI in the below way:SPRO>Materials Management>Logistics invoice verification>maintain Customer ...
Hi Experts,I have a radio button group declared as 'RB1' on my selection screen which should be INVISIBLE when i enter the selection screen. There is a pushbutton created on application toolbar with function code as 'CROBJ' . on click of this pushbu...
Hi All, I need to add a custom field to display data in the Tx. ME53N, "Status" tab.Do you know any screen exit or badi for this requirement? I only need dsiplays the field added to the EBAN table. Thanks in Advance!Regards, Martin.
Hi Is there any way of setting cursor in ALV grid when using Function Module . When user selects many no of rows and clicks some button , I have to set the cursor in a particular cell where data is wrongly entered. How to set...
I need to create an outbound delivery in SAP using either sales order/purchase order which I will receive from an inbound idoc.Can anyone suggest a better approach to proceed further in this requirement...Regards,Jeyananth
i have scenario like this.in which i want to have DDTEXT from DD02T...hoping to get responses..for this i need to fetch all the entries from the table konh using the knumh field.then concatenate it_konh-kvewe and it_konh-kotabnr into the variable(a t...
Hii All,I got a problem when i am writing enhancement spot in MV45AFZZ.I have added some new fields in 8459 sub-screen at item level in VA01 transaction some of those fields are mandatory for some materials Now if the user goes for a save with out en...
Hi Experts, i have added two custom fields on header and item screen of VA01 screen.Plz somebody let me know how can i update the data entered in those fields to VBAK&VBAPtables.Plz let me know where exactly i can write the code.
for my project, i need to receive a I/F file which including network master data and register all the network to my sap R/3 application. i implemented this with standard BAPI function(BAPI_BUS2002_CREATE, BAPI_BUS2002_CHANGE, BAPI_BUS2002_SET_STATUS)...
hello, i have create a module pool with a custom field ZTEST declared in the TOP include. The same name i have declared in the Dympro '0100'. In the after input i tried to get the value but the variable ZTEST doesen't contains value also if i have fi...
| User | Count |
|---|---|
| 5 | |
| 4 | |
| 3 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
