This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Hi All,my code is as below i_timetickets2-exec_start_date = sy-datum. i_timetickets2-exec_start_time = sy-uzeit. i_timetickets2-exec_fin_date = sy-datum. i_timetickets2-exec_fin_time = sy-uzeit . APPEND i_timetickets2. CLEAR i_t...
Hi,To an existing notification in IW22, when i attach any documents in the GOS Icon and save, documents gets saved but they do not trigger the BADI/USER EXITS which normally do when the notification is saved.But if i change a particular field value a...
I just discovered the RSPO_OPEN_SPOOLREQUEST, RSPO_WRITE_SPOOLREQUEST, and RSPO_CLOSE_SPOOLREQUEST function modules (in this thread : , and in many threads in the forum).But what is the interest of using them, as we have the same thing with ABAP stat...
Hi,Here i m doing the first stage dealerscenario, in which PO is created,so my 1st doubt is which tax code i have to be used in PO? and when i m going to capture the excise invoice in J1IEX ,there is no MRP indicator in MISC tab.so please do suggest ...
Dear all,I have to put defaul value in selection screen,so I have calculated in initialization event.Following are the code:INITIALIZATION.CALL FUNCTION 'K_PERIOD_GET_FOR_DATE_KOKRS' EXPORTING KOKRS = '9000' DATE = S...
Hi Experts,This is a standard SOA issue but i did not get it resolved now.Would be kind if anyone could assist.We have an ABAP main program creating an object a via module RFC_Acalled as "CALL FUNCTION 'RFC_A' destination lv_source_sys_a"and afterwar...
hi sap masters,i have a requirment with my report... curently my report produces each line item accoding to the WBS ELEMENT.Now if i have the parent WBS ELEMENT such as C.2111054.X.1.01.40.44 all the below WBS ELEMENT VALIUES should on same line as ...
In VA02 > Display doc. header details>Status>Object status i have the following statuses:10 NCCM Not checked by CM20 CCMN Rejected by CM30 CCMO OK by CM40 NCDM Not checked by DM50 CDMN Rejected by DM60 CDMO OK by DM70 NCGM Not checked by GM80 CGMN R...
Hi,i have tried to some user the authority in ME9F (Message Output) only forDisplay Message and Trial Printout, but i cannot find an authority object.Now i will try to write an abap where a user selects some purchaseordersand then can try to Display ...
I haven't seen any screen exit available for Planned order create(MD11) transaction. It exists customer include in CI_PLAFDB for table PLAF BUT no user exist to keep these fields in this transaction?Have found couple of similar questions in forums, b...
hello, i have a table which has a 9 character primary key. now this key can either be alpha numeric, how do i go about finding the largest number in the alpha numeric field when it has character values also?
Hi gurus,I am using ORDERS ORDCHG message types for sending order create and change data out of SAP using ME10 and ME11 process codes, now I want to send all the line items even if the change is in only 1 of the PO line items.e.gif we have a PO with ...
Hello Experts,I have develop one sreen , in which i want once the user click on save button, entries get disable and save button also,and edit button in appliaction toolbar get enable.Plz suggest,Aastha
Dear Friends,I have created new company code in R/3 development system with only one transport request. I have created Sales org, Sales office, Plant, Business plance, Shipping poing and other links also. The transport request is not moved to quality...
hi all,i have set hotspot in oo alv for column1. now i would like to trigger hotspot_click event when i click the value in column1 field.i have defined a local class 'l_class_event' and defined a method 'handle_hotspot_click for event hotspot_click' ...
Hi Experts,I am using the FM BAPI_ACC_DOCUMENT_POST to post Accout document.My requirement is I need local currency for line item should be Zero, remaining currencies are having some value for the same line item.Is it possible or not using this Bapi ...
Hello,I have to lock agreement ( transaction ME33k ) for change mode , if I find that earmarked fund is in use ( transaction FMX2).In order to check if there are any locks , I am using FM ENQUEUE_READ in order to check if there are any locks.If I fin...
hi everyone. need your help, I have one custom table, let's call it YTAB. This table has several maintenance views created for it, depending on company code. For YTAB, i have created a maintenance view YTABX. When we moved YTABX to PRD, we cannot ...
Hi,I have two parameters on the selection screenfor the fist one i have created search help using F4IF_INT_TABLE_VALUE_REQUESTas soon as i select any value form the search help i need to fill the second parameter with some value.example.when you pres...
Hi Experts,We are using GUI_DOWNLOAD function module to download data into presentation server in ECC6.DATA: T_DATX(300) OCCURS 500 WITH HEADER LINE.T_DATX is the one we are passing to FM which contains data to be downloaded.In 4.7 version, we have u...
Hi Experts,We are using GUI_DOWNLOAD function module to download data into presentation server in ECC6.DATA: T_DATX(300) OCCURS 500 WITH HEADER LINE.T_DATX is the one we are passing to FM which contains data to be downloaded.In 4.7 version, we have u...
hello everyone,In my report prog, there are two parameters:p_matno LIKE mara-matnr OBLIGATORY, p_s_loc TYPE mard-lgort AS LISTBOX VISIBLE LENGTH 8.When I input p_matno and press enter, the listbox P_S_LOC is populated with the corresponding values by...
Dear Experts,I have a requirement to convert smart forms to PDF.After converting smartforms to PDF, I am getting the following errors.1. Special signs like u201C&u201D, are shown as <& > in PDF.2. Some line breaks which are in smartforms are not appe...
I have programmed ALV report using function module REUSE_ALV_GRID_DISPLAY. I have declared my final output internal table's batch field as CHARG_D which is of 10 characters.I have passed field_catelog-no_zero = 'X'. for batch field.However when I do...
Hi Experts, I am creating sales order and displaying the order number. If I double click on the order number, it has to go to VA03 and order should be displayed. For that I wrote BDC. But When I execute it, the VA03 screen comes with a small frame....
HI, I have created a variant for a report.Is it possible to change the report dynamically (i.e In the runtime i need to change the values of the variant).I dont want to create a new variant,I need to change the values of the variant in the run tim...
Hi,I have deleted an index from an existing table in DEV. But I forgot to note down the TR no under what I incorporated that DDL.Now I want to send that change to PRD. But I dont remember the TR No.Can anyone tell me please how can I find that TR no?
Hello Experts,I'm currently facing a performance issue reading routings in a customer program.I need information from all the routings in our system.We are using the engineering change management, so i use SAP default FMs to ensure that only valid op...
Hi all,I have develop a custom payroll register report using the PNP Logical Database Screen.The Report is working fine for the small number of personnel numbers. but when i give the single range of employees it is giving me the dump error of DBIF_RS...
Hi All, Have any one of you actually used this FM for parking documents successfully? If yes, can you please throw some light on what all has to be passed? A clear piece of code will help me a lot. Thanks in advance, Rahul
Hi,i have added a specefic button ton convert by grid alv to PDF.it's works, but my las column of alv grid is truncated in the pdf document (may it's exceed the limit)How can i see all my alv columns in the converted pdf document.PS: I am using this...
Hi all, I have a question regarding select single and select up to n rows. Why does select single take more time to execute when i dont specify all my primary keys in the where condition. For e.g if i have a table t1 with fields f1, f2, f3, f4...
HiFollowing code is giving an error,seems problem with passing the internal parameters,can anyone throw some light on where I am going wrong. REPORT ZSCRATCHPAD . data: begin of valtab occurs 0. include structure...
Please Explain me.Thank u in advance
Hi All, We have the following scenario in place for our client1. Creation of a Sales order triggers the creation of a Purchase Order automatically through IDOCs.2. Also the creation of Sales Invoice would generates a Purchase Invoice automatic...
Dear Friends,I know there are lots of thread for FTP_Connect but still my query is not resolved so I thought I should post a new query.I am trying to use FTP_Connect FM for doing FTP to another server. I am passing all the requisite parameters to thi...
Hi Gurus,I am not able to find the proper Idoc type for EDI 824, can you please tell me what will be the * IDOC TYPE, MESSAGE TYPE, AND PROCESS CODE* FOR this.ThanksAmresh
Good morning experts,I just wanted to know if this is possible:I had a report with a selection-screen where I can enter a table-name and one ore more filed-names (separated by ;).After that, I create a table like my entered (for example MARA) CREATE ...
Hi all,i want a USER EXIT for ME22N while saving. i want EKET data. After checking EKET data, i want to chage EKPO data.Thankspabi
Hi all,I have this requirement that when user presses SUM button for a particular field in a report instead of Summing it up and displaying I can apply my own formula and display its value. For Ex : When we press sum button for field efficiency :EF...
Hi, I have one requirement,i want to have a variant where i have date field on screen.I want to run this program in background.but whenever i run this program(everyday) date will be changed without changing in variant everytime.Thus user does not w...
Dear All,I am writing ALV Modify program to modify values of Customer - KNVV - > KVGR1,KVGR2,KVGR3,KVGR4,KVGR5 fileds.I want to set ListBox for the above five fields. I am using REUSE_ALV_GRID_DISPLAY_LVC - function to call ALV Modify program.Please ...
I am getting the following issue when I click on the select option field.Whenever I click on the field I get a pop-up "Maintain Select Options" which has options like > , < , >= , <= , =.On selectiong any of the option an input field appears rather ...
What is the meaning of bdc_okcode '=p+'
Dear Sir ..........The foll is my pricing structureRate per Sq ft----I have copied Pr00 condition type for the sameClub mem fee................ another con type copied from pr00AGreement reg chrgsam not sure-----this needs the record to state that th...
Hi friendsI have used the user exit -MEREQ001 to add new fields in the item screen for tcode me51n.but i have added three new fields using the screen 111.now my problem is my not able to update the fields in the database.and values are not displaying...
Hi all, I searched in the forums but couldnt find anything about using BAPI_DANGEROUSGOOD_SAVREPMUL.I read the documentation of this function module.in spite of using the mandatory fields described in doc , still i am getting the error "IDoc was not...
I need to schedule a daily job for 10 days of every month.(1st to 10th of every month) we can set start date in job definition, but how to set end date for job. Please let me know, is there any possibility to this task. Regards, Sri
hi,cant i create Radio buttons of same GROUP in different BLOCKS on my selection screen?ags.
Hi all,need to make the changes to the string expect the first and last three characters of the string.any suggestions.thanks
| User | Count |
|---|---|
| 5 | |
| 3 | |
| 3 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
