This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Hello there,i have a general question. I am about to integrate idocs into an interface managing program and i wanted to know if idocs are known to use the application log for writing (error) messages.I know they have the possiblity to do so, but i do...
Hi ppl,I have a report which uses logical database in it.The report gives accurate results but it is very very slow.I need to improve the performance of this report by modifying it, but, am not sure how to go about it.It has statements like GET VBAK,...
Hi I have a transport A which contain created table + report ( using lock object found in B )B also contain the lock on the table created in A.I have "Include the TR B in the TR of A"I want to know when releasing the transport in what order should it...
I have 2 columns for table controls <col1> <col2> for which i need to input values I can have multiple same values for col1 and cols 2 seperately but not together , means both in combination shud form a unique key if not then need to display messgaec...
Hi All,How to check whether a program is called in update mode. is there any system fields set for this . Please let me know.Many Thanks!Regards,Preethi G
Hi I need to create WBS elements programmatically. For this I am using the BAPI BAPI_BUS2054_CREATE_MULTIThe fiield tht I am passing are wa_wbs_element-wbs_up = 'P-02-0002-9-011'. wa_wbs_element-wbs_element = 'P-02-0002-9-012...
Hi Experts,Is there any function module which take input a integer value with continue and cancel button.and i want to set the label of input field and set default value for input field.and return the input value or cancel command code.thanks
Hi, How to check sap logon password in case of mixed cases.Is there any fn or Bapi to check.is so provide details for it.
Hi All,I have a table control. I need to disable some of the fields in the table control..means it should be visible but not enable..How to do it?
In short:I want to implement a way to control if certain ABAP code (certain logicial areas) are executed, by having the ABAP code prompting for an activation key.Much like when you are promptet for a Developer access key or an object key for chaning ...
I'm having a minor issue with some return code values in my ABAP.This is what part of it used to look like before I modified it:With Code in version 1, the sy-subrc was not always zero, sometimes it would be 4.That was fine, and my abap would do some...
Hi,ALL,i WANT TO CUT DELETE AND EDIT BUTTON FROM SE 51 . IS THERE ANY CHANGE IN CODING OR EFFECT ON SCREEN CODING.PLEASE HELP ME. THANKS.
Dear All,Can any one tell me what is sapscript of print program? and how to check the sap script for RFKORD10 print program?Thanks in advance!Regards,Nidhi
Hi All, I have to create sales text for each material number entered in sales order which using VA01 tcode .i know there is configuration settings in SPRO, but i want to do automatically while using VA01 tcode.i need right Exit or Badi for this as so...
hey , i have a program with main screen 500 and many subscreens 501,502 and so own .when i want to validate wrong input in a field and set message type 'E' in the PAI of the subscreen the program raise the message and exit from the program . if i tr...
HI all,I'm having some problems showing top-of-page content.All code is working but top content not shown.here it is *&---------------------------------------------------------------------* *& Report YCCASTRO_TEST_ALV *& *&-------------------------...
Dear Experts,We have a issue with SA38. We wanted to restrict Executing Programs from Background through SA38.we have given S_PROGRAM with value action SUBMIT and group * and user has access to S_BTCH_JOB with value RELE and jobs *When we test with...
Hi friends,I have been cleaning up our ABAP Add-on code lately and I need to replace all Kernel calls by Function modules or reports etc.I have been unable to find a replacement for 'GET_ACCESS_INFO"., which is used as follows:CALL 'GET_ACCESS_INFO' ...
Dear All,I have a requirement to change the valuation price when raising purchase requisitions (ME51n). when selecting source of supply (Contracts), i want to copy the Net price of the selected contract to the Valuation price of the Purchase Requisit...
Hi,Are there any templates / BDCs or LSMW objects for import of Item variants into SAP?We are a furniture mfg firm and implementing SAP...We plan to model all our various products as Item variants. For example a chair can have various variants based ...
i am trying to create a Enterprise Service.the steps that i am following are:In se80 i am right clicking and then creating a enterprise service.I am selecting the option as service consumer and then proceeding with the steps.the wsdl that i am using ...
Hi all, i have copied a few existing tables and used it in my program.after activating my tables(tables that are copied)i ve sent it for transport from development to quality.but my basis consultant replied me with RC = 8.and in the report...
Hi,I am working on a pricing routine. Now, what I need to do is for each line of the PO, I need to go get info from the original order. This info is stored in EKKN. I have used field symbols for this as I am unable to find global data for EKKN in the...
Hi all,I've made an copy of MIGO transaction. I need to clear some data after user is posting data. I've been trying to find the right spot for that but I am not able. Can anyone help me on this one please?My question is:I need to change MIGO transac...
hiam getting ''P" and "L" type-incompatible.REPORT ZTREE1. data: l, "leading characters t, "trailing characters done. "done flag parameters p(2...
Hi Experts I have webservice which I need that just specific users to be able to use for that I create a role but I am not sure how verify that just specific users use this WS .Do I need to create new authorization object or assign specific authoriz...
hi,i am using Message TypeCOND_A -Pricing ConditionsIdoc Type COND_A01to post condition types in tcode me32k.i get idoc status as 53 and in bd87 i can see all condition types.but when i check in tcode me32k i find few types missing.i tried debugging ...
I have a central application on system B, which is called from system A. The application needs in addition some special data again from A, so there is an RFC jump back to A ti get the required data,In short: A calls B, B calls A back to get some data...
Dear friends, Please advise as how to code the below scenario in order to obtain the best performance.I've an internal table IT_BSAD.Now I've to check if in the combination of bukrs,augbl,auggj,kostl,prctr,gsber,aufnr, if there is a single record...
Dear All,I have a issue in formatting the header in the ALV display. We have changed a report program to ALV In Report output was:From To OptionIn ALV, using REUSE_ALV_COMMENTARY_WRITEthe output is comi...
Hi All,We get the run time error DATA_WRITE_ERROR.............when writing some data to application server file.The reason as mentioned in the short dump is 'Capacity Limit has been reached'.And the error text information is Error text: "Descriptor n...
Hi i want to know what is the program executed when we login or logout of SAP and will this program execution is recorded in STAT log or not ThanksRajgopal
Hi all,I want the description of the data element on the postion of the data element in selection screen .eq. sales organization on position of vkorg.Regards, Rahul.Moderator message - Moved to the correct forumEdited by: Rob Burbank on Mar 19, 20...
Hi Experts, is there any Function group which will help me upload/download excel file?Kindly advise.thanks & regards,M.S
Hi,I need to get displayed the two fields from Basic Data 2 tab to Basic data 1 tab. Is this possible ?Also is it suggestable to increase the material Description length from 40 ?
Dear all,In F-32 transaction some columns in line item display got disappeared.We found out that it is because of entries for user .TCADMIN. in table TCVIEW .How it got updated there and how to get rid of them.Regards,Kannan N
Hi all, I am using the FM SO_DOCUMENT_SEND_API1 to send mail in text format, but the problem now is iam getting the space between each characters and also for each lines the alignment differs. can any one tel me how to solve this issue ? D o c u m e ...
Hi ExpertsI have an issue here I have problem with MRKO tcodeWhen i update with company code - 2464 and selecting 'SETTLE'.ITS DONE AND DISPLAYING FINEwhen i update with company code - 0259 and selecting ' SETTLE'.its throws a error like " NO TAX ASS...
Hi All,I am generating one report wherein I am trying to fetch the duty values and vat from Invoice verification document and CST, freight also. From which table and field, can I fetch these things. Can anybody help me?Thanks & Regards,
Dear Friends,Can anyone guide me how to check the objects existing with specific namespaces in SAP ?We need to delete couple of namespaces, hence want to check the list of objects that exist with those namespaces.Appreciate your valuable guidance.Reg...
Hi guys,i COPIED A REPORT PROGRAM . Everything works fine the program activates and runs. But then the selection-screen does not display the short text for the dictionary field.for example SELECT-OPTIONS: s_vkorg FOR vbrk-vkorg OBLIGATORY. WHich shou...
Hi AllI currently have an issue with our Solution Manager system, once of our Basis team has attempted to implement the CUA on solution manager, however this has obviously gone wrong at some point and now we have a huge collection of users in our sol...
Hello,I'm using the FM L_TO_CANCEL to cancel a TO item.The problem i'm facing is that in the delivery, the picked quantity does not increase after canceling the TO.The TO status shows as completed and canceledHence if I try to create another TO, it s...
HiI have a requirement in which I have to send a mail to an external address. Now, in that mail, I have to send an internal table data too. In the mail, it should go in a tabular format with headings for each column.I have searched the forums but cou...
Dear All expert,I want to do update a custom table in MV45AFZZ when the order passed credit check.But I do not know , is there any indicator about the result of the credit check?I mean some field or table stored those kind of data.Many thanks in adv...
I have this below mentioned piece of code in sapscript ==> windows. I want to right align the text Order qty, Price per unit and Net value. But dont know how to do it , can somebody please help meUL &ULINE(71)& IL <K>Item,,Material,,Descript...
hello all,while importing archive file in FTWL, the status has gone into IN PROGRESS and is never completing. Im an not able to re-import as the file has been locked. please let me knwo if anyone has worked on thistheja
Everything WORKS FINE, I am not getting the F4 help in the interface. CALL FUNCTION 'SE16N_INTERFACE' EXPORTING I_TAB = 'ZHRAPAUTHPERNR' I_EDIT = 'X' I_SAPEDIT = 'X' I_CLNT_DEP ...
Hello Expert,I have the following requirement:My selection screen has an input field which is used to keep the directory for user to download data in the report.I want to add a command button in the selection screen after the field. By clicking the b...
hi friendsIm in front-end editor (new) ..whenever i type (for ex : write ) ..when i type wr ( 'write' wil appear immediately so when i press enter it should be written on the editor automatically)..it is not happening so....what settings should i mak...
| User | Count |
|---|---|
| 6 | |
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
