This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Hi All, I am getting run time error one select query of a standard program - LSCD2F01. The issue is - " The program "SAPLSCD1" has exceeded the maximum permitted runtime without interruption and has therefore been terminated."Error analysis -...
Hi.I have two z tables, zxyz and zabcMY requirement My requirement is , when a record is updated in the table zxyz, backend the same record should get created or changed in table zabc(This zxyz is being updated from zprograms, zscreens).There are mor...
Hi,I have an internal table with a column filled with data. What I want to do is to get every second line (odd or even lines) and fill another column using that selection. Can anyone help me do that ? Thanks
Hi Experts, I am going to update customer master data addresses by using function as belows;LSMWBusiness Object Method : BAPIBusiness Object : BUS4001Method : SAVEREPLICAMessage Type : ADRMASBasic Type : ADRMAS03File port LSMWPar...
Hello,I have a problem when trying to create ALE interface for BO. There was a previous development, which was with error ''Segment *** is used multiple times in IDoc types''. I try to delete ALE interface, but weren't cancel release. So now I have f...
Hi,I have created a custom tab with few fields in MIGO header. These fields are not editable and need to populate from PO. Could anyone help me with populating the data in the fields from EKPO.I also have to create these fields in MKPF.Regards,
hiiii to all.i have made a report on enquiry of coustomers. the problem where i stuck is that. i have to give the automatic serial number to the data which is entered in that report.so is there any coding which is to be done or any call function.. wh...
hi Can anyone let me know how can i find out , as who had sent me the popup from TH_POPUP FM ??RegardsVenkat
Hi Folks,I need small help from you. I am creating a batch job through ABAP using JOB_OPEN, and JOB_CLOSE FMs. I have set start immediately STRTIMMED = 'X' in JOB_CLOSE FM to start the job immediately when scheduled.But the problem here is that the b...
Hello,I want to check the value of Two input fields that I have on Dynpro Screen (it is NOT for WebDynpro). I read about the FM get_dynp_value but I don't know how to use it. I saw the fields that are:Exportingi_field =i_repid =i_dynnr =Changingo_val...
Hi All, I am intermediate in ABAP programming i have seen in many other site and in some scn discussion that use '=' symbol instead of 'EQ' for better performance.So i want to what is the logic behind it ?
Hi I have a custom table but somehow during transport release somehow database of table has been removed from quality.Table exists in dictionary but not in database.I cannot run SE14 in quality as i do not have access. I tried deleting the table in d...
Hi Guru's,How do i check if a table contains a specific value? I want to check if a table contains the value that a user entered, is there any option to check the table without select query.or which is the best way to check the table for a specific r...
Hi all,i wants to read item text in ME42 , for this i have used FM 'READ_TEXT'.But unfortunately i am not getting the item text, here is the code i have used.Please sujjest me the necessary changes, I am taking output through TXZ01 field.SELECT EMAT...
Hi abapers, I am working on abap hr now .I displayed entity code(ENT_CODE) from table ZTE_AIRLINE_STG as parameter on selection screen(filter criteria). when we press F4(create f4 )button on ENT_CODE this field will display only this fields Entity ...
I have to make the table maintenance for the interest tables where the rate is defined on the date rangesfrom BEGDA to ENDA like4% 10.10.2013 - 31.10.20135% 01.11.2013 - 31.12.9999Now if a new entry needs to be maintained in this table maint...
Hi Experts,I am getting CONVT_NO_NUMBER dump in one of my delete statements.Dump snapshot:The program attempted to interpret the value "000000000000000051 R100" as a number, butsince the value contravenes the rules for correct number formats,this was...
Hi,Generally while creating delivery from Sales Order we will have a check at item level whether Partial Delivery or full Delivery is allowed which will come from custom master.Similarly when we are creating delivery from Scheduling Agreement we dont...
ex : scenario:i have data in final itab:assignmentcustomernnodocment typeDoc.datAmount in FCCuryAmount in LCOutstanding amt120000021200000212000002100201002010020DRDZDZ16.06.2008-406280.4-2,03,140.20-2,03,140.20INR-406280.4-2,03,140.20-2,03,140.20i n...
Hi All,We have a requirement where we need to display the hierarchy of cost center groups based on cost center value. I am aware of the info that we can get the hierarchy from SETLEAF, SETNODE and SETHEADER tables. And I have even analyzed that there...
Hello, experts! I'm new to SAP and I'm confused by the concept and effect of business object. Could you tell me anything about business object? Thanks a lot!
Hello Experts,My requirement is to have a outlook email message with link to custom transaction (contains multiple tabs).I managed to achieve the outlook email part with shortcut to custom transaction using FM SWN_CREATE_SHORTCUT. But since the trans...
dear sir,I have a report, when I run it I m not able to found total icon.Please find below screen shot.Please help as soon as possible.Regards Swatantra
Dear forumers,I have the following scenario to work on:-"EDI852 data is received by customers daily in the form of an XML message. There is no way to identify who the message is received from without opening each message to determine the sender. So, ...
Dear Experts,Requirement : Baseline date in MIRO screen will pick up automatically based on respective PURCHASE ORDER GRN Posting Date. If MIRO contains multiple PO & GRN, system will pick up the 1st line item PO andits respective 1st GRN posting da...
Dear guys, I want get PO item detail's Material Data tab -> Cross-plant CM field -> Characteristic Values by abap.I write code at DADI(SE19), Implement the "ME_PROCESS_PO_CUST" - > Method: PROCESS_ITEM (IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM)Tip: I...
Good evening,if you open Eclipse with an existing project w/o a network connection to the corresponding SAP-system you'll get an errormessage stating that it is not possible to logon. This is just as it should be. ...
Hi, we have SAP Retail (ECC 6.0). We´re implementing Intercompany PO Process, every works fine except the GR with outbound delivery.We´re using the BAPI BAPI_GOODSMVT_CREATE to Post the Goods Receipt and the document flow is not updated for the outbo...
Hi Guys.I have a code MESSAGE e000(zest) WITH p_i_ekko-ktwrt v_valor_ktwrt.Why the values appear duplicate? (see image attached)See my class message attached.Thanks.
I added that Dropdownlist and added the Fcode to it too and wrote my code inside user command but it never saves the selected value in db table...in debugging also the field is showin blank value...so help in getting this value.
Hi ABAP Gurus , My requirement is to display more than 255 character in a single row in excel file send as attachment,Also this should not be splitted into two rows.Please suggest with sample code.
Hi.We are a manufacturing company and receive numerous Purchase Orders and Invoices via email as a PDF.We spend a lot of time typing this information in, is there a software/service out there that will allow me to convert these PDFs into useable XML ...
Hello,We have developed a custom program in SAP to send cost centre related data as an e-mail to a list of people maintained in a custom table. The requirement is to have each cost center data to be put in a separate tab in excel(meaning the excel fi...
Dear All,I already gone through many forum but i could not find any solution so that i came to post here.I have added the Custom tabstrip and table control using implicit enhancement in VF01 / VF02 / VF03 item data like below screen shot.Here From th...
Hello all, I am working on a requirement where I need to call transaction 'RE_RHGRENZ4' in my custom program, can you please help me how can I prefill the selection screen of transaction RE_RHGRENZ4 before I call the transaction. Once the transaction...
Hi gurus ( this is my first question in here )i m trying to develop an alv program and getting an error as mentioned in the subject.please help me.*** program's select options is : SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-B01. select-...
Hello Experts,I'm very new to smartforms and having some issue in order to display various tax fields. According to the requirement I need to display FS, GST and HST if their values are not 0.00. So this means it could be following possibilities.All ...
Dear expert,I am new to development and may i ask about based on the scenario below:I would like to use the POS interface in SAP having the following procedure, please advice if the procedure below is correct1. There will be some flat csv file from e...
Hi,I need to clear multiple invoices with one payment (in electronic bank statement line item). I am using the report RFEBKA00 and the user exit FB00001 to find the clearing informations.Information: total of the amount of the invoices is equal to th...
Hi ,I am facing one strange lock issue.User is trying to create delivery for sales order containing more than 1200 items va tcode vl10c.It showing information message V50R 024"At least one order was blocked and could not be delivered".When we check ...
Hi Experts,Need your suggestion on the below issue.I have a Production Idoc issue. Last week there was a Go-Live in my project . Nature of the issue : Whenever a BOM is created, or changed, Idoc gets triggered through change pointers. Change pointer...
ABAP debugger is running slow while debugging. F6,,,wait,,,F6,,, wait... Not consistent on all clients. ======================================MAIN MODULE INFORMATION: sapfront.dll SAP Frontend for Windows 730 Final Release 7300.1.2.3261 137...
Hello Experts,I've a requirement where I need to update sales orders header text. I've been told that I need to read data from SOOD and SOFM tables. However, our functional doesn't know the connection between these tables as well as how to retrieve d...
I am trying to transfer certain Adobe Form objects through SAPLink Technique .I need Adobe Forms plugins. Kindly Support......!Thank You.
Hi Experts,I have created my own authorization objects and authorization fields for a custom report. It was working fine before. But when I checked it today it was not working. My authorization objects and fields are like give below.ZINVOICE (Auth Ob...
Hi all,In my report program i need a functionality to send the sm35 log and sm37 spool details through an email.Detailed reqirement : My bussiness requirement is an email distribution is built into the program so they no longer need to go to SM37 or...
Good Day Gurus,In my organisation the user that creates a purchase order is allowed to do a goods receipt. I've got a requirement from the business requesting to restrict a user from goods receipt his/her own PO but be able to good receipt another us...
Hi Friends,I am trying to post account receivable using this BAPI.When i posted normal with customer and GL account it is a success.When I am adding the Tax to be posted in ACCOUNTTAX table it is giving error : TAXPS cannot be determined in non-tax ...
Hi Gurus,I have a requirement to create a functinal module for GR Posting for each line item of Process Order.Does anybody have any sample code to create the same.If so kindly post the same or else suggest some ideas.Regards,Sankar Roy
Hi all,There is 1 query written which is executing fast in 1 system but same query when applying on other server...taking lot of time.Though it is simple but i would like to understand the logic behind this,,.and is their any effective way to write t...
| User | Count |
|---|---|
| 6 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
