This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
hello. my insert statement is as follows:insert zfin_netting from TABLE gt_tab_netting ACCEPTING DUPLICATE KEYS.however only 1 record is inserted while the table contains 12.there is no primary key in the table.
In my report ihave written 'STOP' in the middle while printing out soma data.But the display stops there.After that i have again some write statement.but how to restart execution for furthur printing.tell me the syntax.reatart, resume.....anything...
Hi all.i gt a problem in enable the field in the table control.I gt a validation check for duplicate record in the field, therefore i use chain. The message class was display, but the field is not enable to input. What is the problem? Below is my fl...
hello,In abap hr what r the things have to be concentrate, pls let me know i have to give interview.thankssuji
Hello Dear Friends,I am looking for UEBTK field in BAPI_PO_CHANGE BAPI but I couldn't see it. How can I set a value for UETBK? Thanks.
hi, i have got two servers. one for development and other for quality. in development my CL_GUI_CFW=>FLUSH is working fine, but when i try to execute my prog in quality "flush method" is giving short dump, its returning sy-subrc <> 0.can anybody sugg...
hi experts,How can we fetch the local date i,e date which is present in desktop computer??is it sy-datlo?? i have used it but still shows sap system date.Thanks,Gaurav
Hi Experts, In outbound program i am sending my file to application server. I need that file formate should be SJIS (japan) formate. Could you please tell me how to convert file into SJIS formate.I will give maximum points.Thanks & Re...
Hi , Is there some FM or logic to find the requirement of a material for a particular month. e.g. i would like to find the requirement of a material X in the plant Y for the month of Jan 2008. Regards Arun
hi experts,i have one requirement that on first screen there shold b three radiobuttons..if i click on to 1 then a new selection screen opens with some parameters n radiobuttons..plz tell me how cud i do dis..how can i use SET SCREENS OR CALL SCREENS...
hi to all,i want to fetch 5 records from standard table,in that table ,for these 5 fields some records are repetetive.if i fetch those recordds by using select query,only the first record is only coming,n remaining repetetive records are not coming.i...
Hi,How do we capture a record double clicked by the user in a drill down ALV Report?
Hi friends, could anyone tell me "How to degub the module pool program"...!!Thanks in advance..!!
Problem with ALV display,I would like to display my internal table records as formated like this: In my internel table I am having the following colums : Col1, Col2, Col3, Col4, Col5, Col6, Col7. And I want to display them like this format and subseq...
Hi What are the “field” and “chain” Statements and use?Regards Prajwal.K
Dear All,Could anybody pl tell me the way to send the O/P of report to perticular Email-ID.RegardsShashi
Hi Experts Can you explain me that, in table some of the fields has predefined values, whether its a value table or what. Pls explain, how to set predefined values for particular fields to our own tables.Thank in advance.RegardsRajaram
hi to all,what are the ABAP activities to do in upgradation to ecc 6.0.what i need to do and how to do.how to apply sap notes?can any one help me?regardsraadha
Hi,I am totalling the fields in ALV according wise. If i have two currency i.e USD and INR then total should come as Grand Total of all USD and INR. But in output it displays the cross(x) sign .So how to use it
Hai, I need to give the following 30 character text in my menu......> Goto and then i am adding my menu here and the text for the menu is more than 20 characters( almost 30 characters - thats the requirement) how do i acheive it ....... I AM o...
Hi Experts, I am working on following scenario of warranty management in ABAP webdynpro:1. Customer calls a call center. 2. Problem is logged in service notification. 3. Call center creates a service order for solving the problem and is assigned...
while executing my application , i am not able to get the full content of the view in my print out if i use the PRINT option in FILE menu in the browser. so what i have to do to get the whole content of the view in my pintout.pls help me in this
Hi,Is it mandatory to use all the fields of an index in the where clause of a select statement in terms of performance.Thanks,K.Kiran.
HELLO GURUS!!In trip_post_if i not able to create implementation it showing an error "t001 is not relevant table" , in attributes of trip_ post_fi filter dependent checkbox is clicked and bukrs is mentioned .if i removed the bukrs then it gives an e...
Hi Experts,SUBMIT ZCRM_BDC_BP_CUSTOM_UPLOAD2 VIA SELECTION-SCREEN WITH SELECTION-table rspar_tab AND RETURN.I want to skip the selection screen while using above syntax.How to do that ?ThanksAnee
Hello, I am trying to establish interface between SAP and .NET system. for example, when ever new material is created I want this New Material details to send to .NET system. Like this for all transactions data I have to send once they ...
Hi All,I Have developed an ALV Report.I have made first 3 columns as fixed and others to scroll in left-right directions.When i filter/ascending order/etc to the first column, the one partcular column is getting disappeared.Whats the reason behind th...
Hi All, I need some info on BAPI. In my report i need to use BAPI and i dnt knw basics of BAPI. Is there any link where i can find the whole information on BAPI and the way to implement it.Regards,Sirisha.
As we need to move data from one Server to another. What all thinks we need to do.Plz help....Kind Regards,Suvi.
Hi,Plz tell me the meaning of Dynamic Patterns...What is the procedure for Create Dynamic Patterns...Thanks....
Select all the PRGRP, WERKS, ANTEI and NRMIT from table PGMI based on product group and plant from selection screen store into one internal while storing, Multiply ANTEI = ANTEI * 100 .can any one tel me how can i multiply antei by 100
hi all,i want to check the common field between xml and idoc genrated in sap. Also how to avoid the duplication of xml to convert it into idoc.fwd the solution if anyone knws
hi experts, i am new to the modulepool program... i have a requirement to develop a screen which contains header & line item data, line item data in table control... and also screen having create , change , display .. please send me standard pr...
Hi ...How to increse the SAP ECC5.0 IDES Version's Paging /buffer size..Because am unable open some of the transactions codes...Thanx ..regards,PrashanthEdited by: Prashanth Polsani on Feb 4, 2008 6:20 AM
Hello all . Thanks for the reply. but One doubt comes in mind. Should I have to create two seperate lock for the Creation and Change. Because I have created lock object on two fields One is srno number fileds and Material Document no fields . Sr No F...
hi gurus, Iam using bseg table for fetching gl account(hkont)based invoice report,the problem iam facing is,since iam giving entry in a non key field hkont,fetching is very slow,takes more time,i also tried to create a index,but 'INDEX' op...
Hi folks,I have a requirement to add excel attachments to opportunities in CRM in batch. Our process is to create an opportunity based on data sent to CRM from R/3, which is working fine. For each opportunity created, we wish to attach an excel file....
Hi Experts,I have desinged two button using pf status , with name 'Entry' and 'Report' .clicking on the button Entry i called another screen .Now i want to move from that screen to the parent screen.(ie the pfstatus button screen)Note: clicking repor...
Hi All,I want to execute a certain report in background. If the user tries to execute the program in foreground, the system should prompt him not to run it in foreground. In the same way, the message should not come if the program is run in backgroud...
The type of the database table and work area (or internal table) "LT_ZISUSLIP" are not Unicode convertible. error in line " when 'SAVE'. modify zisuslip from table lt_zisuslip. endcase.Plz guide.Thanks in advace.
Hi,Please answer me for the below questions:1.In main window...suppose the width/length is 5cm...I am trying to enter data of 10 lines...wht will happen???The same case with variable and constant window....2.I want to read an internal table from the ...
can any body give easy deatils about it?
If i have a value say, 1.47the nearest integer value is 1.if 1.51, the integer value is 2.How to get this,Thnx in advance
HI, Please can anyone tell me that there is any BAPI available for Upload of opening balances. Then please let me Know. Waiting for reply,Thanks & Regards, Aniruddha.
hi all,how to check the idoc or xml which are already regenrated in sap.As well how to find out the common field in idoc and xml.
Hi ,I have to delete only top horizental line of a box in script?is it possible?if so please give me idea.Thanks,Kumar.
Hi,the datacontainer has 5 fields such as subty begda endda pernr telnrseparated by #.I need to sort this data container based on pernr(4th column).Is it possible to do this..? if it so guide me..Thanks in advance.
Hello All , I have create one Module Pool program.it is having three t code for creation ,change and display. it is having two table Header and details table.I have decided to go for shared lock as per requirement. That's why created on...
i have taken two variables of the type j_1iexchdr-exnumthese variables are number and number1now this are picking values and i am comparing these values and then throwing an message if these are not equal.but the problem is that the number value is t...
hi all ,i have two pushbutton like 'display' and 'insert' in selection screen and each have two fields, problem is that i have to hide one pushbutton and corresponding fields when clicking another . can anyone plz. tell me how could i do ?regards sa...
| User | Count |
|---|---|
| 5 | |
| 4 | |
| 3 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
