This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Hello!How we can obtain the number of document (belnr) created by function PRELIMINARY_POSTING_POST without using sy-msgv1?Thanks a lot!
Hi experts,I have to extract data from fields PERNR, WORKDATE, CATSHOURS, RAUFNR and AWART, from table CATSDB. And from fields BTRTL and ENAME, from table PA0001.And from fields LGART, BETRG and ANZHL, from table PPOIX.Table PA0001 and PPOIX both has...
Hi All,We have a requirement to automatically print a single check for payee and alternative payee together and net the amount of all invoices. If we have a vendor A and Vendor B (whose alternative payee is Vendor A), Business requirement is to get s...
Hi Experts,I want to know the Table where the Equipment history details (Installation / Dismantling etc.) are stored. Would appreciate if you can provide the Field where the Equipment Installation date is stored.Regards,Thushantha.
hiii wanted to confirm whether if we do v_total = v_total + kwer(quantity)note the v_total is a char and kwer is qty this will cause a high risk of dump??
Hi ABAPers, I am working one GRNSTATUS report.In which based on DELINS (Delins GUID) i want to find Purchase order/Purchase order Guid.If any one having idea about this Could you please guide me.Thanks in Advance,regards,kishore.
Hi,I have a Z structure already appended to MARA in production system.Now in Development system, I added two more fields to the Z structure that is already appended to MARA.I activated the Z structure and activated MARA. I can see the two new fields ...
Hi,I have a Z structure already appended to MARA in production system.Now in Development system, I added two more fields to the Z structure that is already appended to MARA.I activated the Z structure and activated MARA. I can see the two new fields ...
hii had 2 RB GRP 1 & 3 RB in GRP2.My req is if in GRP1 rad1 is clked than the none RB of GRP2 shd be hide,if in rad2 is clked than 3 RB of GRP2 shd be hide from the screen.I am trying to to it but giving dupm:too many friled set in group.LOOP AT SCRE...
hi experts,i have developed a report in which i m using fm reuse_alv_grid_display,everyhting was wrking fine,but two days before my report is giving dumpi m giving the dump details plz help me to sort out this problem,,,,, Unable to interpret " *" as...
hi experts.........what is ME22N/ME21N?thanks in advance........Warm Regards..Ruchit
hi guru,i have two screens i.e. 100 and 200, screen 100 is modle dialog box it has purchase order number field and two push buttons enter and cancel.by giving PO number press enter button it will goto the 200 screen and fetch the data related to purc...
Hi,Will anybody let me know how to create a field with length 1200 in a table.Regards,Madhavi
dear allhow can i find exits in MIGO t code in ecc 6.0thank u
hi,i have seen every field having some technical specification in help.sapthat means for sales office having technical name as SALES_OFFthen what about XBLNR.. plz tell methanks and regardskalyan
hi all, i have field value in and out based on the requirement if in s there s color to be red and if out s there i s color green. in alv list display plz guide me thanking you
Guru'sI wish to restrict my user that as soon as he enter country other than IN i.e india he cannot select Rec. Account as '1000000'.I hav implemented BADI with defination name VENDOR_ADD_DATA& in that Method PRESET_VALUES_CCODEthe is as if I_LFA1-...
I am running a batch job but it is failing .And the error i am getting is -- ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILEDCan anyone suggest why this error is coming.Thanks,Anoop
Hi Gurus,How to insert new entries to table TCURR?Are there any function module that we can use?Thanks & Regards,Ari
Hi,I have a concern on BADI and USER EXITS.1.See in my program, I don't find the user exits using perform statement. However if i take the development class, I have found 4-5 user exits. is it possible to use any one of them in my standard program fo...
HI All,Which are the badi's and userexit getting called in FS00 ?
Hi Gurus,I want to pass the document number to the transaction id : ME23N from my ALV Grid program. Can you guide me on how to do this. One way out is to pass the data to ME23, for which I know the coding. Client wants to see purchase order through M...
Hi,The below code using to Insert line of table control .CODE:IF temp_okcode NE 'DISP'. "indicates display mode READ TABLE itab2 INDEX 1. IF sy-subrc = 0. Clear:itab2. CLEAR: itab2-nubag , itab2-wtbag . APPEND i...
Hi All,we are sceduled job in background processing mode for the program RBDAPP01(Inbound Processing of Idocs),but job was cancelled due to RAISE_EXCEPTION.if i cheked in ST22 it is showing as""The termination occurred in the ABAP program "SAPLMCS2" ...
Hi,Can any one tell the declaration of string variable in database table.
Hi Experts,My requirement is to display Material document data from Archive database .Is there any FM to do it other than '/PBS/SELECT_INTO_TABLE'.waiting for your quick replies.Thanking you in advance.Regards,Bhanu.R
Hi all,I have a requirement wherin I need to read the field KALA-KADAT (Costing date from) from CK40N transaction into and Z- function module which is called internally for costing purpose.To read the value I am using the FM 'DYNP_VALUES_READ'The cod...
Hi Why do we define parameters as Pass by Value in BAPI and RFCPlease let emn knowThanks inadvanceRama Devi
Please look at the code below and give me some suggestions:I have a deep structure which contains some fields and a table which contains three fields and a tablelet's say the name of my structure is my_struct and the structure of my struct is as foll...
hi.......plz tell me steps to edit standard purchase order layout and printing program............
Hi All,in my report i am using interactive concept. for example i am giving personal number range in selection screen as 12900 13600 . In basic list it is displaying the output. when i click on personal number it will show the details in secondary l...
HI Experts,I am new to SAPDevelopersNetwork as i dont have proper knowledge as how to use this Complete Network i Urge the Expert's to give some links or as how to us this network properly and gain complete knowledge on SAP-ABAP basic knowledge .( i ...
Hi Experts,Recently I had a requirment that needed me to mark the status of inbound delivery documents to "Completed". I tried looking at some possible methods here in the fourms and came up with this thread ...One of the answers here was to update t...
hi all,in our company when we are using SU01 transaction, i need to set up some fields as mandatary likeit should not proceed unless we assign a user group and company address to user.how can i set these fields as mandatory. and where can i see what...
I have the following question.How can use the following sentence ABAP if have i want do READ TABLE gt_bsid WITH KEY belnr = gt_bkpf-belnr and field2 = gt_bkpf-field2.Regards
Hi All,Can you please help me out in this situation :I have assigned a issue to moving maintenance on table T023 out of SPRO and directly into the transaction OMSF which I believe basically make the table no longer cross-client. Now I want to know if...
I am trying to use BAPI_OUTB_DELIVERY_CHANGE to add a new line item to an existing delivery automatically when a new line is added to the sales order. I can successfully use the bapi to change the order quantity of an existing line but cant get it to...
Experts really need your help soon,How to debugg the program in back ground mode. In below code, zsvcmdc1 program which does the changes to some fields in Va02 . I need to find out immediately why the program is missing to update one of the Va02 fi...
Hi All, SELECT-OPTIONS : S_TCODE FOR TSTCT-TCODE. START-OF-SELECTION. SELECT * FROM TSTCT INTO TABLE IT_TSTCT WHERE TCODE = S_TCODE. ... The same code results in SYNTAX ERROR in 4.7c.In ECC 6.0, no such error resulted, but SUBRC is ...
Hi allI would like to create a Function module from the BDC Recording (Standard transaction)?Can one please let me know how to create it..ThanksArun Joseph
Hi ,When we r uploading Vendor master i need tyo maintain two languages like english and japanise in One LSMW .Is it possible?If possible ple let me know the solution.I will rewarded if it is useful......Thanks.
Hi all,We have a requirement to add one validation when creating sales order with reference to quotation. In VA01, after clicking create with reference button and entering a quotation value in the reference field, a customized error message should co...
Hi experts,I am currently facing trouble with table control Vertical scrolling. But table control working fine for horizontal scroll bar. i have tried all the attributes. But i am not succeeded. Please suggest me and provide valid inputs. surely aw...
Hi Guys,I have created 5 entried in table TVARV for Parameters:Entries are as follows: NAME TYPE NUMB LOW Z11 P 0001 PARAMETER 1 Z11 P 0002 PARAMETER 2 Z11 P 0003 ...
Hello Experts,I have few user who is assigned to display the master data of personnel area 5400. Now an employee is moved from personnel area 5400 to personnel area 5900. And this user is still able to view the master data of 5900. How to stop that c...
Hi,I have requirement where I need to send excel sheet as attachment in mail. I could do it by using FM SO_NEW_DOCUMENT_ATT_SEND_API1. But, I am not able to format the excel sheet before sending.I need to make heading bold, fix column width and wrap ...
Hi all,We're trying to create users using function BAPI_USER_CREATE1 from a child client in a CUA environment (SAP ECC 6.0). The goal is to grant access to the user into the same child client. When using the function, the return message says the us...
Hi Experts,I added a new field for contract # on VA01 for the screen SAPMV45A 8309 ,if the user enters the contract number I need to check whether this number exists in the VBAK table or not.For this do I need to write the code in PAI or in the user ...
Hi experts, Can anyone explain where to check the material availability.I mean I need the tables which contains the quantity of a particular material is available in the stock or not.thanks in advance,
Hi all , How to append a row in the first row of the internal table . In my scenario , i got 3 rows in itab . 1 row in jtab . i have to put 1 row of jtab in the first position(row) of itab ... Please let me know .... Regardsraj
| User | Count |
|---|---|
| 5 | |
| 4 | |
| 3 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |
