Re: Function module to send mail????

Former Member · ‎2008 May 14

Hi,

which function module can we use to send mail in ABAP online program , i dont want to attach any file, just i want to notify the users by writing few lines in the email body. can u help me out in this issue..

Thanks & Regards,

Harsha Ramaiah

Former Member · ‎2008 May 14

Hi Harsha,

I am sending the whole FM , along with the attachment part also. If you dont require it, you can remove that part of the code.

***************************************************************

zdp_solisti1 is a structure having fields naming LINE of type LCHR and its length being 2500.

*****Email declarations

data : gv_delimit TYPE c,

lv_lncnt1(5) TYPE c,

tempread(10) TYPE c VALUE 0,

objpack TYPE sopcklsti1 OCCURS 0 WITH HEADER LINE,

objhead TYPE zdp_solisti1 OCCURS 1 WITH HEADER LINE,

objbin TYPE soli OCCURS 0 WITH HEADER LINE,

objtxt TYPE zdp_solisti1 OCCURS 0 WITH HEADER LINE,

reclist TYPE somlreci1 OCCURS 0 WITH HEADER LINE,

doc_chng LIKE sodocchgi1,

tab_lines LIKE sy-tabix.

CLEAR GV_DELIMIT.

GV_DELIMIT = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.

TEMPREAD = LV_LNCNT1.

REFRESH OBJTXT.

CONCATENATE 'The no. of error records are : ' TEMPREAD

INTO OBJTXT-LINE.

APPEND OBJTXT.

CLEAR OBJPACK. REFRESH OBJPACK.

CONCATENATE C_CODE

C_CMMT

C_COMMENT1

INTO OBJTXT-LINE SEPARATED BY GV_DELIMIT.

APPEND OBJTXT.

LOOP AT IT_DATA INTO WA_DATA.

CONCATENATE WA_DATA-ZCODE

WA_DATA-ZCOMMENT

WA_DATA-ZREASON

INTO OBJTXT-LINE SEPARATED BY GV_DELIMIT.

APPEND OBJTXT.

ENDLOOP.

CLEAR GV_DELIMIT.

CLEAR OBJPACK. REFRESH OBJPACK.

CLEAR DOC_CHNG.

TAB_LINES = 0.

OBJHEAD = REJFILE. APPEND OBJHEAD.

DESCRIBE TABLE OBJTXT LINES TAB_LINES.

READ TABLE OBJTXT INDEX TAB_LINES.

DOC_CHNG-OBJ_NAME = REJFILE.

MOVE TEXT-006 TO

DOC_CHNG-OBJ_DESCR.

DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).

CLEAR OBJPACK-TRANSF_BIN.

OBJPACK-HEAD_START = 1.

OBJPACK-HEAD_NUM = 0.

OBJPACK-BODY_START = 1.

OBJPACK-BODY_NUM = 1. " 3.

OBJPACK-DOC_TYPE = 'RAW'.

APPEND OBJPACK.

FOR ASCII TO BINARY OBJECT FUNCTION

TOTLINEXFER = 0.

TOTXFER = 0.

BINMAXLEN = 255.

REFRESH OBJBIN.

LV_CR = CL_ABAP_CHAR_UTILITIES=>CR_LF.

TGTMAXLEN = BINMAXLEN.

TGTLEN = 0.

LOOP AT OBJTXT FROM 2.

IF NOT OBJTXT-LINE CP 'The no. of records are '." AND

CONCATENATE OBJTXT-LINE LV_CR INTO BUFFER.

SRCOBJLEN = STRLEN( BUFFER ).

SRCOBJPTR = 0.

WHILE SRCOBJLEN > 0 .

XFERLEN = TGTMAXLEN - TGTLEN.

IF XFERLEN > SRCOBJLEN.

XFERLEN = SRCOBJLEN.

MOVE BUFFERSRCOBJPTR TO OBJBIN-LINETGTLEN.

TGTLEN = TGTLEN + SRCOBJLEN.

SRCOBJLEN = 0.

CLEAR BUFFER.

ELSE.

MOVE BUFFER+SRCOBJPTR(XFERLEN) TO

OBJBIN-LINE+TGTLEN(XFERLEN).

APPEND OBJBIN.

CLEAR OBJBIN-LINE.

TGTLEN = 0.

SRCOBJLEN = SRCOBJLEN - XFERLEN.

SRCOBJPTR = SRCOBJPTR + XFERLEN.

TOTLINEXFER = TOTLINEXFER + 1.

ENDIF.

TOTXFER = TOTXFER + XFERLEN.

ENDWHILE.

ENDIF.

ENDLOOP.

IF TGTLEN > 0.

APPEND OBJBIN.

TOTLINEXFER = TOTLINEXFER + 1.

ENDIF.

CLEAR OBJPACK-TRANSF_BIN.

OBJPACK-TRANSF_BIN = 'X'.

OBJPACK-HEAD_START = 1.

OBJPACK-HEAD_NUM = 0.

OBJPACK-BODY_START = 1.

OBJPACK-BODY_NUM = TOTLINEXFER.

OBJPACK-DOC_TYPE = 'XLS'.

OBJPACK-OBJ_NAME = REJFILE.

OBJPACK-OBJ_DESCR = 'Rejected Entries File'.

OBJPACK-DOC_SIZE = TOTXFER.

APPEND OBJPACK.

REFRESH RECLIST.

MAIL1 = 'xxxxxxxx' " Email Address

RECLIST-RECEIVER = MAIL1.

RECLIST-REC_TYPE = 'U'.

APPEND RECLIST.

CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'

EXPORTING

DOCUMENT_DATA = DOC_CHNG

PUT_IN_OUTBOX = 'X'

COMMIT_WORK = 'X'

TABLES

PACKING_LIST = OBJPACK

OBJECT_HEADER = OBJHEAD

CONTENTS_BIN = OBJBIN

CONTENTS_TXT = OBJTXT

RECEIVERS = RECLIST.

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

***************************************************************

Hope this is helpful to you. If you need further information, revert back.

Reward all the helpful answers.

Regards

Nagaraj T

Former Member · ‎2008 May 14

Hello,

Check this sample report.


REPORT ZV_SEND_MAIL .
TABLES: EKKO.

PARAMETERS: P_EMAIL   TYPE SOMLRECI1-RECEIVER
                                 .

TYPES: BEGIN OF T_EKPO,
  EBELN TYPE EKPO-EBELN,
  EBELP TYPE EKPO-EBELP,
  AEDAT TYPE EKPO-AEDAT,
  MATNR TYPE EKPO-MATNR,
  MENGE TYPE EKPO-MENGE,
 END OF T_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF T_EKPO INITIAL SIZE 0,
      WA_EKPO TYPE T_EKPO.

TYPES: BEGIN OF T_CHAREKPO,
  EBELN(10) TYPE C,
  EBELP(5)  TYPE C,
  AEDAT(8)  TYPE C,
  MATNR(18) TYPE C,
  MENGE(16)," LIKE EKPO-MENGE,
 END OF T_CHAREKPO.
DATA: WA_CHAREKPO TYPE T_CHAREKPO.

DATA:   IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                WITH HEADER LINE.

DATA:   T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
        T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
        T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        W_CNT TYPE I,
        W_SENT_ALL(1) TYPE C,
        W_DOC_DATA LIKE SODOCCHGI1,
        GD_ERROR    TYPE SY-SUBRC,
        GD_RECIEVER TYPE SY-SUBRC.


************************************************************************
*START_OF_SELECTION
START-OF-SELECTION.
*   Retrieve sample data from table ekpo
  PERFORM DATA_RETRIEVAL.

*   Populate table with detaisl to be entered into .xls file
  PERFORM BUILD_XLS_DATA_TABLE.


************************************************************************
*END-OF-SELECTION
END-OF-SELECTION.
* Populate message body text
  PERFORM POPULATE_EMAIL_MESSAGE_BODY.

* Send file by email as .xls speadsheet
  PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
                               TABLES IT_MESSAGE
                                      IT_ATTACH
                                USING P_EMAIL
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                                      ' '
                                      ' '
                                      ' '
                             CHANGING GD_ERROR
                                      GD_RECIEVER.

*   Instructs mail send program for SAPCONNECT to send email(rsconn01)
  PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.


*&---------------------------------------------------------------------*
*&      Form  DATA_RETRIEVAL
*&---------------------------------------------------------------------*
*       Retrieve data form EKPO table and populate itab it_ekko
*----------------------------------------------------------------------*
FORM DATA_RETRIEVAL.
  SELECT EBELN EBELP AEDAT MATNR MENGE
*   UP TO 10 ROWS
    FROM EKPO
    INTO CORRESPONDING FIELDS OF TABLE IT_EKPO.
ENDFORM.                    " DATA_RETRIEVAL


*&---------------------------------------------------------------------*
*&      Form  BUILD_XLS_DATA_TABLE
*&---------------------------------------------------------------------*
*       Build data table for .xls document
*----------------------------------------------------------------------*
FORM BUILD_XLS_DATA_TABLE.
  CONSTANTS: CON_CRET TYPE X VALUE '0D',  "OK for non Unicode
             CON_TAB TYPE X VALUE '09'.   "OK for non Unicode

*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
*    con_cret type c value cl_abap_char_utilities=>CR_LF.


  CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR' 'MENGE'
         INTO IT_ATTACH SEPARATED BY CON_TAB.
  CONCATENATE CON_CRET IT_ATTACH  INTO IT_ATTACH.
  APPEND  IT_ATTACH.

  LOOP AT IT_EKPO INTO WA_CHAREKPO.
    CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
                WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
                WA_CHAREKPO-MENGE
           INTO IT_ATTACH SEPARATED BY CON_TAB.
    CONCATENATE CON_CRET IT_ATTACH  INTO IT_ATTACH.
    APPEND  IT_ATTACH.
  ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE


*&---------------------------------------------------------------------*
*&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
*&---------------------------------------------------------------------*
*       Send email
*----------------------------------------------------------------------*
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
                                          PIT_ATTACH
                                    USING P_EMAIL
                                          P_MTITLE
                                          P_FORMAT
                                          P_FILENAME
                                          P_ATTDESCRIPTION
                                          P_SENDER_ADDRESS
                                          P_SENDER_ADDRES_TYPE
                                 CHANGING P_ERROR
                                          P_RECIEVER.


  DATA: LD_ERROR    TYPE SY-SUBRC,
        LD_RECIEVER TYPE SY-SUBRC,
        LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
        LD_EMAIL LIKE  SOMLRECI1-RECEIVER,
        LD_FORMAT TYPE  SO_OBJ_TP ,
        LD_ATTDESCRIPTION TYPE  SO_OBJ_NAM ,
        LD_ATTFILENAME TYPE  SO_OBJ_DES ,
        LD_SENDER_ADDRESS LIKE  SOEXTRECI1-RECEIVER,
        LD_SENDER_ADDRESS_TYPE LIKE  SOEXTRECI1-ADR_TYP,
        LD_RECEIVER LIKE  SY-SUBRC.

  LD_EMAIL   = P_EMAIL.
  LD_MTITLE = P_MTITLE.
  LD_FORMAT              = P_FORMAT.
  LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
  LD_ATTFILENAME         = P_FILENAME.
  LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
  LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.


* Fill the document data.
  W_DOC_DATA-DOC_SIZE = 1.

* Populate the subject/generic message attributes
  W_DOC_DATA-OBJ_LANGU = SY-LANGU.
  W_DOC_DATA-OBJ_NAME  = 'SAPRPT'.
  W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
  W_DOC_DATA-SENSITIVTY = 'F'.

* Fill the document data and get size of attachment
  CLEAR W_DOC_DATA.
  READ TABLE IT_ATTACH INDEX W_CNT.
  W_DOC_DATA-DOC_SIZE =
     ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
  W_DOC_DATA-OBJ_LANGU  = SY-LANGU.
  W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
  W_DOC_DATA-OBJ_DESCR  = LD_MTITLE.
  W_DOC_DATA-SENSITIVTY = 'F'.
  CLEAR T_ATTACHMENT.
  REFRESH T_ATTACHMENT.
  T_ATTACHMENT[] = PIT_ATTACH[].

* Describe the body of the message
  CLEAR T_PACKING_LIST.
  REFRESH T_PACKING_LIST.
  T_PACKING_LIST-TRANSF_BIN = SPACE.
  T_PACKING_LIST-HEAD_START = 1.
  T_PACKING_LIST-HEAD_NUM = 0.
  T_PACKING_LIST-BODY_START = 1.
  DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
  T_PACKING_LIST-DOC_TYPE = 'RAW'.
  APPEND T_PACKING_LIST.

* Create attachment notification
  T_PACKING_LIST-TRANSF_BIN = 'X'.
  T_PACKING_LIST-HEAD_START = 1.
  T_PACKING_LIST-HEAD_NUM   = 1.
  T_PACKING_LIST-BODY_START = 1.

  DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
  T_PACKING_LIST-DOC_TYPE   =  LD_FORMAT.
  T_PACKING_LIST-OBJ_DESCR  =  LD_ATTDESCRIPTION.
  T_PACKING_LIST-OBJ_NAME   =  LD_ATTFILENAME.
  T_PACKING_LIST-DOC_SIZE   =  T_PACKING_LIST-BODY_NUM * 255.
  APPEND T_PACKING_LIST.

* Add the recipients email address
  CLEAR T_RECEIVERS.
  REFRESH T_RECEIVERS.
  T_RECEIVERS-RECEIVER = LD_EMAIL.
  T_RECEIVERS-REC_TYPE = 'U'.
  T_RECEIVERS-COM_TYPE = 'INT'.
  T_RECEIVERS-NOTIF_DEL = 'X'.
  T_RECEIVERS-NOTIF_NDEL = 'X'.
  APPEND T_RECEIVERS.

  CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = W_DOC_DATA
            PUT_IN_OUTBOX              = 'X'
            SENDER_ADDRESS             = LD_SENDER_ADDRESS
            SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
            COMMIT_WORK                = 'X'
       IMPORTING
            SENT_TO_ALL                = W_SENT_ALL
       TABLES
            PACKING_LIST               = T_PACKING_LIST
            CONTENTS_BIN               = T_ATTACHMENT
            CONTENTS_TXT               = IT_MESSAGE
            RECEIVERS                  = T_RECEIVERS
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.

* Populate zerror return code
  LD_ERROR = SY-SUBRC.

* Populate zreceiver return code
  LOOP AT T_RECEIVERS.
    LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
  ENDLOOP.
ENDFORM.


*&---------------------------------------------------------------------*
*&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
*&---------------------------------------------------------------------*
*       Instructs mail send program for SAPCONNECT to send email.
*----------------------------------------------------------------------*
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
  WAIT UP TO 2 SECONDS.
  SUBMIT RSCONN01 WITH MODE = 'INT'
                WITH OUTPUT = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM


*&---------------------------------------------------------------------*
*&      Form  POPULATE_EMAIL_MESSAGE_BODY
*&---------------------------------------------------------------------*
*        Populate message body text
*----------------------------------------------------------------------*
FORM POPULATE_EMAIL_MESSAGE_BODY.
  REFRESH IT_MESSAGE.
  IT_MESSAGE = 'Please find attached a list test ekpo records'.
  APPEND IT_MESSAGE.
ENDFORM.                    " POPULATE_EMAIL_MESSAGE_BODY

Cheers,

Vasanth

Former Member · ‎2008 May 14

Hi,

Call the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1'to post the message to SAPMAIL.

Also refer to following link:

http://sapdev.co.uk/reporting/email/emailhome.htm

Hope this helps.

Reward if helpful.

Regards,

Sipra

Former Member · ‎2008 May 14

use FM :

SO_NEW_DOCUMENT_SEND_API1

data: maildata type sodocchgi1.

data: mailtxt type table of solisti1 with header line.

data: mailrec type table of somlrec90 with header line.

start-of-selection.

clear: maildata, mailtxt, mailrec.

refresh: mailtxt, mailrec.

maildata-obj_name = 'TEST'.

maildata-obj_descr = 'Test'.

maildata-obj_langu = sy-langu.

mailtxt-line = 'Test'.

append mailtxt.

mailrec-receiver = 'xyzatabc.com'.

mailrec-rec_type = 'U'.

append mailrec.

call function 'SO_NEW_DOCUMENT_SEND_API1'

exporting

document_data = maildata

document_type = 'RAW'

put_in_outbox = 'X'

tables

object_header = mailtxt

object_content = mailtxt

receivers = mailrec

exceptions

too_many_receivers = 1

document_not_sent = 2

document_type_not_exist = 3

operation_no_authorization = 4

parameter_error = 5

x_error = 6

enqueue_error = 7

others = 8.

if sy-subrc = 0.

write : 'mail sent'.

endif.

Former Member · ‎2008 May 14

Hi,

DATA : w_doc_data LIKE sodocchgi1,

t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,

t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,

it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0

WITH HEADER LINE,

t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE.

Populate the subject/generic message attributes

w_doc_data-obj_langu = sy-langu.

w_doc_data-obj_name = 'SAPRPT'.

w_doc_data-obj_descr = ld_mtitle .

w_doc_data-sensitivty = 'F'.

Fill the document data and get size of attachment

Populate message body text

Here you can add your text........

it_message = 'Please process the error records'.

APPEND it_message.

Add the recipients email address

CLEAR t_receivers.

REFRESH t_receivers.

t_receivers-receiver = "email id here".

t_receivers-rec_type = 'U'.

t_receivers-com_type = 'INT'.

t_receivers-notif_del = 'X'.

t_receivers-notif_ndel = 'X'.

APPEND t_receivers.

CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'

EXPORTING

document_data = w_doc_data

put_in_outbox = ''

TABLES

packing_list = t_packing_list

contents_bin = t_attachment

contents_txt = it_message

receivers = t_receivers

EXCEPTIONS

too_many_receivers = 1

document_not_sent = 2

document_type_not_exist = 3

operation_no_authorization = 4

parameter_error = 5

x_error = 6

enqueue_error = 7

OTHERS = 8.

IF sy-subrc <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

Pls. reward if useful

Former Member · ‎2008 May 14

Hi

Hope it will help you....

Reward if help.

&----

*& Report ZEMAIL_SIVA

*&

&----

*&

&----

REPORT zemail_siva.

DATA : gd_doc_data LIKE sodocchgi1,

l_i_mail TYPE STANDARD TABLE OF solisti1 WITH HEADER LINE,

it_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE.

DATA: w_pack TYPE sopcklsti1,

i_pack TYPE TABLE OF sopcklsti1.

PARAMETERS : p_email(100) TYPE c.

gd_doc_data-obj_descr = 'TEST EMAIL FROM ABAP SE TEAM'.

l_i_mail-line = 'Testing the Mail from ABAP on 31st March 2008'.

APPEND l_i_mail.

it_receivers-receiver = p_email.

it_receivers-rec_type = 'A'.

it_receivers-com_type = 'INT'.

*it_receivers-notif_del = 'X'.

*it_receivers-notif_ndel = 'X'.

APPEND it_receivers.

CLEAR w_pack.

w_pack-head_start = 1.

w_pack-head_num = 0.

w_pack-body_start = 1.

DESCRIBE TABLE l_i_mail LINES w_pack-body_num.

w_pack-doc_type = 'RAW'.

w_pack-doc_size = w_pack-body_num * 255.

APPEND w_pack TO i_pack.

CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'

EXPORTING

document_data = gd_doc_data

PUT_IN_OUTBOX = 'X'

COMMIT_WORK = 'X'

IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =

TABLES

packing_list = i_pack

OBJECT_HEADER =
CONTENTS_BIN =

contents_txt = l_i_mail

CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =

receivers = it_receivers

EXCEPTIONS

TOO_MANY_RECEIVERS = 1

DOCUMENT_NOT_SENT = 2

DOCUMENT_TYPE_NOT_EXIST = 3

OPERATION_NO_AUTHORIZATION = 4

PARAMETER_ERROR = 5

X_ERROR = 6

ENQUEUE_ERROR = 7

OTHERS = 8

..

IF sy-subrc <> 0.

MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno

WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.

ELSE.

WRITE : 'Mail Sent to specified address'.

ENDIF.

By Category

Related Content

Activity Groups

Industry Groups

Influence and Feedback Groups

Interest Groups

Location Groups

Customer Only Groups

Forums

Related Resources

Products

Learning and Support

About

My Account

My Account

Function module to send mail????