This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
My ALV out put display ( grid header headings ) is merged ( field heading are compressed ( just 3 to 4 letter are appearing as a heading of each field, other letters are hiding ) - as each time we cannot adjudt the field length in the output ). How ...
Hi ExpertsI am working on a LSWM project ,which uses BAPI BAPI_PROFITCENTER_CREATE for upload of data,but I am facing a strange problem during the IDOC posting the error "No ALE scenario active in Profit Center Accounting" is shown and the status of ...
Hi, I am displaying a message via POP_TO_Confirm function module.the pop-up has to buttons. The default button by default is first button and we can change the default button.But my requirement is , After the message pops up, There is not be any focu...
Does anybody know how to generate/create user certificate that has CN field filled with user name? we need it to map user in VUSREXTID. All the post and help I see is on how to map the user to the user certificate, but how do I generate the user cert...
HI,I want a list of production orders and its operations based on workcenter,plant and scheduled start date.I'm getting objid from crhd table.How do I link this to the orders tables.Thanks..
Hi,I have created some PO in the system. Now I don't want to lock the complete transaction which creates PO but only those POs which I created so that no one can go and change (edit) those PO number. How can I achieve this ?Thanks.Regards,Tushar.
I want to query a table and get the SUM ( fieldx) without any where clause. However, the fieldx should be dynamic. Select SUM ( Gross_Wt ) from table. I want the Gross_Wt field to be dynamic.Any sugestions.
Is it possible to restrict users from saving variants for transactionsthanksPaul.
HI,I have a ALV List. But I want to display a message on the bar inmedialy after display the list. The message could be as:' The total number of idocs is : VARIABLE"How can I do it? Im searching but i dont find anything ok.Thanks
hello everyone,i need some help in writin an ABAP code. Well the logic is say i have a table which sends data to BW. the data comes like :-Order Q1 101 50 101 20 102 10101 60But i wan...
Hi all,I have been working hatrd on this and i decided its time to post it in here.I have a created an authorization object in se80( work bench)(ZTEST) with standard authorization fields ACTVT,USER, WERKS and before saving it i have gives permitted a...
HelloI am going to perform a unicode conversion. The procedure mentioned in SAP service marketplace is to perform system copy, perform unicode pre-conversion steps, perform export with R3load and then import.My question is if I perform a system copy ...
Hi all,I have 2 questions..Iam developing custom transaction which has 3 screens.1.Please send me the sample logic code for 'SELECT ALL' 'DESELECT ALL' and 'NEW ENTRIES' for the custom transaction ...for this iam using table control.2.On the 3rd scre...
I have created a rfcserver application that handles "IDOC_INBOUND_ASYNCHRONOUS".When connected to SAP on windows IDOC's received are OK. From HPUX the first 8 bytes are swapped like "04CD_IDE" instead of "EDI_DC40".Have anybody seen this before ?HPUX...
Plz send a BDC code for VKM4.While recording VKM4, I am not able to get the field name of the check box on the basic list.
Hii got struck up at the below code. i want to move all my data into strans table. FORM RETRIEVE_DATA . CLEAR: WA_MKPF. SELECT CPUDT CPUTM XBLNR FROM MKPF INTO ZMKPF WHERE CPUDT IN S_DATE. CLEAR: WA_LIPS. If Zmkpf-cpudt = s_date-low. ...
Hi I am using WFMC_MESSAGES_SELECT and WFMC_MESSAGES_PROCESS to issue printouts for invoices from an external program.Everything works fine. However, some of our users who do not have authorization to create/change invoice, i.e. VF01/VF02, cannot run...
Hi,Could you please help me on how to pull the PO from a workflow ?I could access we20 to find the agent #.How do I see if the PO as item under that again and find what is the issue with that PO.Appreciate you help on transactions,process.Regards,Ram...
Hi,I created one Customizing request & transported to QAS, Now i realized i don't want that tansport in QAS, Is there is anyway can i backout that Customizing request?????Please help me.....thanks,
I am trying to code in my program, the ability to either select the vendor information by the vendor number that is entered on the selection which could be blank in which case I would select all vendors or by passing a vendor number from a table that...
Hi Friends,I need to create an FI document once we post Good Issues. BADI, MB_DOCUMENT_BADI, cannot be used since MB_DOCUMENT_BEFORE_UPDATE becuase we need to have the MM document no in FI document as reference and MB_DOCUMENT_UPDATE doesn't allow an...
HiWhen I use the method CL_GUI_ALV_GRID->GET_SELECTED_CELLS to get the selected cell column id and value from OOALV output, It is fetching only column name. I need both column name and column value for drilldown purpose.Pl suggest me.ThanksHema
Hi ,Can anyone know what is the maximum time a program can run without time out ,in foreground/background?Let me know,its an urgent requirement....Thanks in advance!!!
I am trying to start multiple foreground sessions from a 'driver' module asynchronously. I have tried various forms of the call transaction, submit report and wrapping the code in a function module that I have called asynchronously. The function mo...
Hi,This is my first post in SDN and hope I can get a resolution soon. I am doing some custom development using MIGO transaction. If I say am doing a GR, mvt. type 561, I see that there are 2 qty fields (Qty in UnE is open for editing whereas Qty in B...
The master data of material is not set up with customer material.When the order is created, the material material number will be added in the material.Am I right?I am confused. Sometimes I can get customer material in material table MARA. But someti...
Hi All, When I try to raise an exception from the user exit (idoc_output_delvry),I get an error message 'Assign Measurement unit to ISO code'. Can you help me solve this issue.Thanks in avance,Disney.
Hi all I'm currently developing a screen exit for trx LM02, to be used by RF barcode reader. I've made every steps especified on SAP Note 308135. I've defined the screen on customizing, created the project, created screen 1302 (the original screen is...
Hi,I'm trying to disable a row... not a column in a table control so the user can't change it, however I'd like the previuos and next rows in the table control to be enabled for modifications. I know it sounds simple, but i havén't been able to do it...
The system allows this field to be entered with a value of 0707. This is a valid century year but it is so old it should not be allowed. The system just sends the message that it is an old date. Does anyone know how I can make the system issue an ...
I have been asked to modify tcode VA25. We want to add Material# and Job name (Name2 field) to the selection criteria. I have never even looked at SAP code let alone made a modification. I copied program SAPMV75A to a z-program (ZSAPMV75A) but now...
Hi Guys I am getting the error that Table KNVP is already been declared. please correct what is the problem since it work other companies with same codeTables: KNVP.data: l_tabix like sy-tabix,l_s_BIW_KNA1_S like BIW_KNA1_S.case i_datasource.WHEN '0C...
Hi,Some users asked me to have a specific role to display all customizing settings (form transaction SPRO). This new role should allow users only to display customizing settings without changing them.I tried to copy and manipoulate standard role S_BC...
Hi All,I am facing a problem with selection sceen . I have created selection screen with MATNR as select-option . But my input values will be multiple single values (not range) .for ex: matnr = 2 0r 3 or 4 . but i will give input 2 , 4 ,3 single val...
how to perform unit test planning? what are the steps?Explain in detail?
I have couple of custom tables, when changed change documents are captured from table maintenance. Problem is these table entries are transportable only, they cannot be changed manually in Q or prod. If we make certain changes in Dev change docs are ...
Hi ,I am trying to Upload GL accounts From EXCEL to INTERNAL TABLE Using ALSM_EXCEL_TO_INTERNAL_TABLE function module .The problem i am facing is Some Junk data is being Uploading including with Records i maintained in the Excel . Could you please gu...
Hi,I need to use a BAdI.I have it name.How do I start to use it and how do I use it?
I have created a customised va01 screen. I am having problems in pricing calculations. I have tried to use the 'Pricing' function but it is not returning any values.Can anyone help me with the required entries for the header and item input table para...
Hi friends,I have vbap-kwzi5 values that I am retrieving from a subroutine for a sapscript. On the sapscript, I am looking to justify all of them right, so that they look cosmetically good. Can you please tell me to what type of variables I have to a...
I need to add 2 new fields in Plant and storage Tabstrip of MM01 transation. In trying to so this is what i have done :1. Appened the 2 new fields to MARC table as was required.2. Created a new Function Group and Copied The specific Screen ( i.e. 270...
what is the use of program lines in Smartforms? after writing the program how u execute?
Hello to everyone, I have wrote a program which is loading all our products (aprox. 1300 matnrs) and then in a LOOP at itab is doing the following: LOOP AT ITAB. CLEAR WMENGE. EXPORT WMENGE TO MEMORY ID 'ZGRMENG'. SUBMIT ZGRRM07MLBD WI...
how to write utp(unit test plan)
Hello All.Can any one tell me why the following report is giving me a run time error?.......................&----*& Report ZAKTEVEN **& ...
Hi All,I want to implement following functionality:Whenever HRP1000-SHORT field change/save, an automatic background event triggers.Please help me searching such user exit. This field can be changed by PP02.Regards
I am writing a program to extract vendors. I plan to initially extract all of the vendors and going forward, I would like to extract only the vendors that been added after a certain date and any vendors that have been changed. I plan on using the fie...
This is a separate question, although it is related to the repair question that Sridhar/Suresh are trying to help with.If you use SE80 to look at the attributes of a query program generated by SQ01, the package field is blank.So if you do a repair to...
Hi,In program used the below code to dispaly ALV grid. CALL METHOD OBJ_GRID_DETAIL->SET_TABLE_FOR_FIRST_DISPLAY EXPORTING IS_LAYOUT = X_LAYOUT IS_VARIANT = X_VARIANT I_SAVE = 'A' CHANGI...
HI,I have :FORM build_fcat USING p_it_fcat TYPE slis_t_fieldcat_alv. DATA: lwa_fcat TYPE LINE OF slis_t_fieldcat_alv. CLEAR lwa_fcat. lwa_fcat-fieldname = 'NUMERO'. lwa_fcat-ref_tabname = 'IT_IDOC'. lwa_fcat-do_sum = 'X'. lwa_fcat-outputlen...
| User | Count |
|---|---|
| 4 | |
| 2 | |
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
