This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
how do i get notification task statuses. for example, if we have notification 2000050 with 2 tasks, first task has TSRL, second status TSOS. i want to write these statuses. i cant use status_read because it returns system status of the notification n...
Hi frndshow to handle two table controls tcrl1,tcrl2 in BDCi know syntax for declaration iscontrols : <tcntrl name > type tableview using screen < screen no. >but i want to handle two at a time.is options ctu_params is the best one to use or is there...
Hi, I have to call subscreen in report when radio button selected in the selection screen. I don't want to create the module pool program for subscreens. I want to call the subscreen with in the report.Could any one help it on this issue.Good poi...
HI Friends, How to view the tables used for modules like S.D, M.M, P.P, F.I etc?
Hi, I have a small question. Is there some possibility ot add an image to the screen without creating a new SCREEN object? I'd like to do sth like below: <image> SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001. ... fields ... SELECTION-S...
What is Difference between TD shipment and SD shipment?
Hi All, While using select for all entries statement if we specify the range table maximum how many records it can hold without going for dump similarly if we specify the internal table maximum how many records it will hold without any problem...
Hi all, i am trying to get the ffew feilds with the count of one specific feild called as bpartner but the cursor doesnot move inside the select and directly going to the message and thowing the message as output..can u please check it out and let me...
hai gurus can any one tell me how to read the values specified in the ranges, i have assigned low and high values and when i am trying to read the values in teh range in to my program it is reading only the first valuecan any one tell me how to get t...
Hi Omkaram,From where i increse the SAP GUI patch level .
Hi Experts,Can you please explain what is the different between <b>Dialog & Report Programming</b>Thanks in Advance,Guru.
hi, how to find screen exits? and after finding the screen exit how to use that screen exit? suppose i want to add a sub screen to existing transaction , how can i proceed??
Hi All,i am using two system landscape ecc6.0, i had configured TMS and, and also established rfc.my problem is that when i tries to import the queue from DEV in PRD server its throwing an errorAn error occurred when opening the source file for readi...
Hi All,As per the requirement i have to convert amount in indian rupees to words. Which is the function module should i use? I tried using "SPELL_AMOUNT". but it is not dislaying in the correct format. please help.Rakesh
Hiwhat is custom control. what is the use of this.and how to create this Regards prajwal
HI expertsi have a doubt in IDOCin inbound iam getting the error code is 51'no status record was passed to ALE by the application"(red light)iam getting this errorho to solve this .in out bound iam getting GREEN LIGHT
1. how we will find out user-exit for particular transaction through packages please send me step by step?2. i have created one table for that i have one change request. i have created one report program. for that i have one change request? which req...
Hi!I'm working with release 4.6 C. Release 4.7 contains a functionalitywithin the debugger mode which I'm missing on 4.6 C. While debugging you can export the content of an internal table (as excel file ).I would rather like to know which function is...
Hi all,i am creating i pdf frorm,when i save the changes in layout of pdf form a error message occurs" Error when transforming object data"and get exit from program.what is the problem which i faced.Help..........
Hi all,Can anybody tell me what is difference between Call by reference and Changing parameters.good help will be rewardedSachin.
Hello.If somebody write UE with extension COOM0003, please, reveal your code.Thanks.
Hi allI want to know how to appear for the ABAP certification exam. Not the content. How to register or appear for the exam etc., ThanksVijaya Chamundi
i have ceated on screen prgram...screen contains one text field of leth 40(type c)...if user enters some text in that and enters save button it will store in dbtable which is created by me(ztable)...but that text storing in big letters...even i enter...
I would like to create a table like:ranges-lgnum <i>equivalent to</i> ranges ranges-lgnum for lqua-lgnumranges-matnr <i>equivalent to</i> ranges ranges-matnr for lqua-matnr...Is is possible?Thanks
what is the use of <u>Address........EndAddress</u> control command in text elements of script?
Hi All,what r the benefits of using PROVIDE STATEMENT (HR abap) over Select and loops used in ABAP(normal).
hi,How do i retreive data from the structure RIWO00? I need to retreive the work center code, the short text for damage code and cause code?useful answeres would be rewarded wih full points.thanks nayan
Hi,my ? is how can we see the Single Roles in a Composite Roleand I want the Table Name and Report and if there is any way tell me bye with warm regardsprashanth
CAN I USE THIS BAPI FOR GOOD ISSUE WITH MOVEMENT 601 FOR OUTBOUND DELIVERY
Hi,does anyone no the relevant tables for the Configuration Profile.Thank you very much.Joerg
hi friends, can u please explain me the usage of GET_NODE & GET_NODE_LATE.
Hi all,I have written a program that creates a billing document( tested by running in the debugging mode),there is output type ZBIL that needs to be attached to the program . the configuration has been done by FS.but still the program is nt called au...
Well I have designed a screen on which there are 2 entry fields, one for Sales Order No. and other for Delivery Doc. No. The user will enter the Sales Order No.I want to provide F4 help to user on Delivery Doc. No. field which will be based on the Sa...
Hello GurusIn our quality system, we are facing problem in this ABAP Dump it generates more than 10000 times & we are unable to find the rectification Can somebody help us to get rectification Error in ABAP application program.The current ABAP progra...
Hi all,I am creating a pdf form but i have getting a error message when i am saving the changes in layout with message id no. FPUIFB051(Changes to layout cannot be saved in display mode).what will i do to save the changes.Thanks in advance.Sanket.
Hi all,I am creating a pdf form but i have getting a error message when i am saving the changes in layout with message id no. FPUIFB051(Changes to layout cannot be saved in display mode).what will i do to save the changes.Thanks in advance.Sanket.
Hi, I have created a screen 100 and there are four fields for the user to input. I need to transfer the data (which the user enters) to the internal table. So that I can compare those data with the database and wants to display a message in the ...
Hi,I have created a custom table zmm which has the fields matnr, werks and art. Is it possible to populate these fields from qmat table. Can I link this table to pick up the entries from qmat. The tables dont have a similar structure.thanks and regar...
fill the blank1) If SY-UZEIT has the value 6:34:45 it can be displaued as 063445 using_______
Hi,I have activated the following profile parameters in my instance profile:rsau/enable = 1rsau/max_diskspace/per_day = 0rsau/selection_slots = 2rsau/local/file = G:\usr\sap\D0\D00\log\++++++++.AUDrsau/max_diskspace/per_file = 0rsau/max_diskspace/loc...
Hi All, Can anybody send me the pgm for shipement delivery report.Its based on transportation mode.
Hi,Can anyone plz tell me how can i display the material that i created using mm01in tcode mm03?thx
SAP note 923766 requires that I add an entry to table TOAEX. There is no table maintenance for this transaction, and also I cannot find a transaction code to do this. i have checked the IMG, but no luck. Anyone know how to do this?Kind regardsJon
Hi everyone,i've found this function <b>BAPI_CONTACTCRM_CREATE</b> to create a new contact but i couldn't find how to lunch this FM.Can anyone explain me how to do it?I need it asap.ThanksDaniele
Hello allcan any one tell me the exact use of the following fn modules F4IF_FIELD_VALUE_REQUESTDYNP_VALUES_READDYNP_VALUES_UPDATE<b>RS_REFRESH_FROM_SELECTOPTIONS</b>To be more specific i called the FM 'RS_REFRESH_FROM_SELECTOPTIONS 'but i dun unde...
Hi, I need to download/modify the vendor & customer details like Phone No ,Fax No and EMail Address. Are there any BAPI's by which I can do this. Say I can get ADRNR number for a given vendor(LFA1) or customer(KNA1)..by using this ADRNR...are th...
hi experts, i m executing one simple ALV report in the background,,,but after some time it is giving a message that "maximum time exceeded" plz help me to shortout this problem...
If SY-UZEIT has the value 6:34:45 it can be displaued as 063445 using_______
Hii want then i show alv with class CL_SALV_TABLEwhen i press f4 on field to build list of valuehow i can do it?Thankshave a nice day
Hi All, I'm a trainee at my company, so i am buzy learning ABAP. Smart forms is one thing that i am really interested in, so please if there is anybody who has link to introduction to smart forms, or any guidence to smart forms, it will be appreciate...
| User | Count |
|---|---|
| 6 | |
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
