This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
VGBEL VGPOS LFIMG1 736 10 1.252 736 10 0.003 736 20 1.004 730 10 1.005 730 10 1.00i new to add the LFIMG colum based on VGBEL & VGPOS, thanks
Hi ,Can anyone tell me how to access a cluster table if there is a table RFDT and i have t extract the "held" data from it and the usera holding the data.Its a transaction FB60 that creates the data.regards nthanks
va01userexit_check_vbap.an idoc is coming from edi .i need to read idoc and depending on condition of field value which is in idoc .i need to pass a error log to some transation how to read a idoc which is coming form edi any sample code is help full
please explain the steps that are used to upload legacy data into sap using lsmw (bapi method)Message was edited by: neela renganathan
Hi,I am required to make certain modifications to make the MD04 transaction work a bit differently. For the purpose, I ran the transaction in debug mode and found that the following BADI was being used: -Definition name: - MD_CHANGE_MRP_DATA Interfac...
what is the main purpose in creation of maintenace views???????and where we use it in real time?????
Hello , I have request for ALV grid that can be edited . Basically , the end user want to have list on the screen with possibility to change and save the changes of content , and some fields want to present as check boxes.I did list , with fiel...
In ALV Report how to display a LOGO....?I used a Function Module 'REUSE_ALV_COMMENTARY_WRITE'....in which there is a field called I_LOGO under EXPORTING ......How to upload the LOGO?and what name should i assign to I_LOGO ?
Hi, Can anybody suggest the replacement FM for"HELP_VALUES_GET_WITH_TABLE"..ThanksVasuki
Hello, I hope someone could help me with this one:My requirement calls for the reports in smartform to be generated into pdf, and then emailed to the specific user. Now, so far managed to generate my smartform into pdf using the function module CONV...
HI can any help me how to extract data from maintenance view T_v and do for all entries.Thanks & regards,Mahendra.
Hi All,I need the example of Vendor performance report..If anyone already did it then please send the example of that report..Note ::: I am not asking for General Examples of reports.Thanks in advanceRaj
Hi everyone,I am having a problem using WWW_LIST_TO_HTML function.I've done many writes and I want to transfer all those writes to a table.The problem is that the table that returns from WWW_LIST_TO_HTML containsalso the old data.For example:<code>DA...
everyone telling that SM30 is for maintaining the table(addition or deletion of records). but we can do addition and deletion of records in se11. then what is the purpose of Sm30????????????
Hi all.material returned due to damage or fault...1 Table & Field name 2 How to get list of damaged material ?3 Example Report ( Only for this query not General Examples of Reports )Thanks in advanceRaj
hi all, I want a selection screen block side by side, is it possiblewithout using screen painter, if it is let me know.Thanks & RegardsRK
hi i m new to abapi have two internal tables itab1 and itab2 with 100 records eachnow i want to my output as followsitab1-field1 itab1-field2 itab2-field1 itab2-field2itab1-field1 itab1-field2 itab2-field1 itab2-field2itab1-field1 itab1-...
Hi all,Need some information.material --- Table and field namePlant --- Table and field namematerial type --- Table and field namematerial group --- Table and field nameThanks in advance.Raj
Hi All,I made a dialog program and i have a field for PA -> zpatrans and a field for psa -> zpsa.I want f4 help attached to both of the fielda - which I have done. Now, I want that when I choose any PA in the field zpatrans, and hit f4 on zpsa - only...
Hi All,1, How to get Pending purchase order details? 2, TableName - FieldName for below fields Purchasing organization --- Purchasing Group --- Purchasing Document Number --- Purchasing Document Date --- item delivery date ---Thanks in adv...
Hi all,In select-options .How to set the how to set the default date duration is last 30 days ???eg.Upper Date : 09/08/2007 ( Current Date ---> SY-DATUM ) ????????Lover date : 09/07/2007 ( Date b4 30 days of current date )Thanks in advance..Raj
Hi,what is secondary index.?What is the use of creating secondary index on the table?suppose i have plenty of records in a particular table. It takes much time to fetch those records using primary key fields.now on making certain fields as secondary ...
Hi,how to print/display, uline and vline in smartforms.
Hi All,I have created a Smartform for transaction MB11. There is alreary a script attached to the transaction MB11.The driver program is SAPM07DR.I have to replace the script by smartform. The output type used is WA02 which is already defined in tran...
Hi all, any bapi available for f-32. thanks in advance..Regards,deviga...
HI ALL pLZ TELL ME HOW TO VALIDATE SELECTION SCREEN.I HAVE ARRIVAL NOTICE NO IN SELECTION SCREEN.ITS FIELD NAME IS /RBC2/YV_ARRNO AND TABLE IS /RBC2/YV_AN_ARNO .NOW I WANT TO VALIDATE ARRIVAL NOTICE NO.AT SELECTION-SCREEN.perform validationsfo...
Dear all,Anyone plese tell me the procedure for creating authority object and implementing it.Transaction Steps Thanks Senthil
Hi, I would like to create a database table field as 'checkbox' - that is, when I go to table maintenance, it should be displayed as Checkbox. Is it possible? Thanks Sg
HiI have a requirement that on double clicking the vnedor number allthe details related to vendor number should be displayed.Can anyone give me the code related to this.
HI EXPERTS !I WANT TO GENERATE REPORT ON LOAN BALANCE AND DEDUCTION REPORT FIELDS FOR INPUTMONTH , YEAR , LON_TYPE, PERNRAND IN O/P IT SHOULD SHOWS'E.CODE'.'Name'.'A/C No'.'Total Ded.Amt'.'EMI Amt'.'Tot No Of EMI'.'Curr EMI NO'., 148 'Balance Amount'...
Hi,I have an ALE scenario in which IDOC is created and sent whenever PO is created. There are 2 fields in one of the data segment which are SPRAS_ISO and IFNNR. In IDOC always the values for IFNNR is 0000000000 and SPRAS_ISO is EN. System is assignin...
hai all,could you plz tell me about what is back ground graphics and, how to create back ground graphics in smart forms
Hi Folks,I have displayed checkboxes with every record in the ALV. <b>Now how to select only one checkbox at a time? </b> For example: if fifth record is already selected and now if I select the ninth record then fifth record should be deselected and...
Hi, I am upgrading one program from version 4.5b to ecc6.o in my program thery are calling onr routine twice, like, (perform y100_form using p_tab. perform y100_form using k_post. form y100_form using p_post structure p_tab.) and p_tab ...
Dear all,I am very new in abap and abap objects. But i have some expr. in other language..specialy development. Right now i am working for srm module...So i want to move my self into abap object and specialy in workflow...Please provide me help regar...
Hi friends, I am creating sales order and based on sales order delivery and based on delivery invoice in one program through BDC by calling different transactions using call transaction method If I run this program in mode ‘A’ it is working fine but...
Hi all, I have written one program to call FB01 to create a document. here is the logic (pseudo code) call transaction 'FB01' mode 'N' using it_bdc message it_message. read it_message with msgtyp = 'E'. if sy-subrc = 0. rollback work. else. ...
hi, I have doubt in displaying the final table using types.in the following code,when i enter the vbeln value it has to show all the values present.but it is giving only one value.for eg if for vbeln there are 4 records it is showng only one reco...
Hi Folks,I have a program which is a local object(not assigned to any package).I am developing a smartform which needs to be called through thisprogram.Without attaching it in NACE can we be able to call this smartform in the program which is declare...
Hi Experts,i am facing a problem to creating a Function Module.Problem: i want to get the data from 20 Database tables standard.there is no relationship in between. Import Parameter is Field_id (Table field) based on this we want Result : Field_id, ...
difference between smartforms and scripts
hi all,please kindly advise what is the purpose for the below FM. I have done some reports with these FM but frankly speaking i still don't know when and where to use it.MD_STOCK_REQUIREMENTS_LIST_APICS_WHERE_USED_MATcs_bom_expl_mat_v2Thanks,BK.
Hi,I want to programatically create a sales order with reference to a contract. Please provide me the suggestions/approaches to do so.Please note that the new order created should have the reference of contract number & the item in its item details -...
Can I get a sample program of ALV (oops) with check boxes in it. thank you.
friends, i have ascenario where,the table vbuk has all the entries in it, but now it was found out that out of the whole table, one specific field of a specific record, value was wrongly put as B instead of C.now when i tried to change it t...
Hi,I have implemented the method IF_EX_INVOICE_UPDATE~CHANGE_IN_UPDATE to trigger a custom workflow when a PO invoice is posted (save button is pressed). When a PO invoice is held (hold button is pressed), it will still hit the method. That is okay s...
Hi folks,I want to put check box in the the beginning of every row of ALV. Can any body tell me how to do that??ThanksSiddarth.
Hi Friends,I have a small doubt, Actually I have created a 'Z' table and in that I took a field as integer. And send to the production it is working fine. Now the user wants to change the data type (he wants to enter negatives values for that field) ...
Hi,I am able to send mail with attachment to my mail id (say [email protected]). But the attachment is in corrupted format.The attachment in the sap outbox is opening correctly. I tried with both ALI and PDF attachment.The read receipt in my SAP Inbox ...
Hi FriendsIam using ZCRM_MDC which stores xml files ..... My aim is to input leadno,guid ,plantype,versionno as and get the xmlfile as out put so i created a function module. Instead i test with select statement as follows: DATA : ITAB LIKE ZCRMD_ADO...
| User | Count |
|---|---|
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
| Subject | Likes |
|---|---|
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
