This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
how is abap calls in banglore
Hi,I created an ALV report using methods and OO, when i click back to go to the selection screen it used to just go back to the SAP start-up menu. So i used CALL TRANSACTION 'xxxxxxx' instead to make sure it always gets back to the selection screen. ...
Hi can anybody explain the Meaning of the following Source codeMPEG_WERKS-SIGN = 'I'. MPEG_WERKS-OPTION = 'EQ'. MPEG_WERKS-LOW = 'MPA1'. APPEND MPEG_WERKS.
hallowhow can i improve this performace for this select loop.Regards LOOP AT zempkostlprice_rec INTO wa_zem. SELECT SINGLE ktext FROM cskv INTO wa_zem-ktext WHERE resrc IN g_r_resrc. IF sy-subrc = 0. ...
hi alli am using a statement s_cust for table1-field1 obligatory.but in the selection screen the obligatory is being done for first range onlyie the low value ,the high value if user dont fill then also the program executesi want to make both the ran...
What is better to use - Views or Database Tables
Hello All, Iam downloading data from a scrn to an excel.Iam left aligning all the contents. every thing works fine but the CURR fields with a sign (eg: '123.12-' ) are not aligned. Kindly tell me how to resolve this issue ? part of my code is below...
Hi,I have run a Report program in the Back groung and it is generated the Spool. But in the Spool it is not Showing all the Columns. So, Then I have selected Display with Maximum Width. Now it is showing fine. But when I download it into Excel some r...
Hi Gurus,I developed an ALV Report . but I want display the Total Amount field header as left and the value in the column is right justification.Please any body know give me the answer.Regards,Shashikumar.GMessage was edited by: Shashikumar G...
hallowi try to do select from view and i get erorr ,what i miss? LOOP AT zem_rec INTO wa_zem. SELECT SINGLE ktext FROM v_cskr_s INTO wa_zem-ktext WHERE resrc = g_r_resrc. IF sy-sybrc = 0. MODIFY ...
How do we create a BDc session to Load a Z Table with entries. Note that the Z table has Table Maintenance associated with it.I am facing this issue:eg. *perform bdc_field using 'ZPHU_FUNC_LEVEL-ZZ_FL_1(01)' ...
Hi,Is there any procedure to calculate the freight cost (HD00 Condition type )?Please let me know..Thanks & RegardsSanthosh
Hello,in table NAST, the field OBJKY is getting concatenated with $ symbol. This concatenation is a customization setting or some program is updating values like this.could anyone please let me know.ThanksArun
HI,I HAVE TO RETRIVE THE DATA FROM VBPA WHERE ( VBELN = ITAB-VBELN AND PARVW = 'AG' ) + ( VBELN = ITAB-VBELN AND PARVW ='WE'.SELECT VBELN PARVW KUNNR FROM VBPA INTO TABLE IT_VBPA WHERE VBELN = ITAB-VBELN ...
Hi Experts, I have used some stadard texts which are created in SO10 T.Code. While saving the standard text it didn't ask any change request. How can i move them to testing environment? Is there any way to add particu...
hi experts, my one driver program along with smartforms is working fine in the development server after transportation to production server it is showing dump error :::the error is:Function module " " not found. ...
Hi ,I have designed a screen which has 5 output fields (Handling Unit's ), i m storing 10 HU's into internal table i_tab1 , The screen has 2 button 'UP' and 'DOWN' when i click 'DOWN' the screen must display 6th HU and so on , and when i click 'UP' i...
Hi, I have 5 numbers like 102 505 106 142 143and i want to find maximum number of them.i dont want to use select query or any internal table.is that any function regarding this ?Point will be awarded soon-R
hi,in my z-table i have a field called matnr for the material number say.its domain defines it as 18 char.say i have created an entry say 200.so it will be saved may be as 000000000000000200.i want it should be displayed with as 200.and if i search f...
HI,In the following select statement i have added a condition like BELKZ = 'X' ,how to declare this in data.SELECT pspnr posid objnr INTO TABLE gt_prps1 FROM prps WHERE pbukr IN s_bus_wg AND ...
Hi im new to ABAP HR. can you please send some sample bdc codes developed in hr module esp PA30 and PA40 transactions ?Thanks and RegardsSwarna
Hi Can we create a table that will have relation with SAP available table fields?
What are the tools for GAP Analysis.
can anyone please tell me how to set a flag.i have to add a field BELKZ = 'X ' in select statement and need to declare.please tell me how to declare in data.thanks in advance.
which is a statement used to write a record to a file in ABAP?
which is a statement used to write a record to a file in ABAP?
Hi ,I want to upload the data into SAP R/3 using LSMW method for t-code O4NA .But during the recording of the t-code , screen details while Flat File Selection (LVCC Strapping Data Upload File) are not getting recorded .There is no standard input an...
HiI am new to ABAP . I need all concepts in DebuggingCould you please forward me any material about DebuggingThanks
WRITE AT d_col t_bomtab-labst UNIT 'QUAN'.whz the use of UNIT 'QUAN'??can anyone please explain me in technical?
what is a label and why labels are not generated in smart forms
hi sir , how to capture the screen shot and attach with that e-mail , whether it is possible or not .. Regards,kumar
how can i change rows into columns in the finaldisplay list
hi all,sorry for repeating question again ........................................................................i'm new to web services. i had a requirement in which i should consume a web service from people soft. i got web service from people so...
Hi ABAP Developers, I am doing the small POC (Proof of concept)..What i am doing is..using dialog programming.. i created screens..it consist of customer name, customer mobile no etc..like this some ten fields are there in the screen. I ...
how can i change rows into columns in the final display list
hi allplease give me an example for Save_TextRead_Text<b>in brief and simple language.please dont provide me links and help material for this.</b>regardsravish
Hi,Please tell me the table name for condition rates?Thanks & RegardsSanthoah
Hi Guys , I have a small dought related to data migration .Like i have a field FISCPER - Fiscal Year /Period is available in the Datasource (Example, 0FI_GL_6) but not available in BSEG,BSEG_ADD ,ZTABLES, FAGLFLEXA Tables.. How to get into...
How to display dynamic messages?Regards,swathi.
hi can any one explain me the full process for bar code conversion in script formshow it is done for fields and what is the process for italso let me know how to check if a field can be converted into barcode or not.regardsArora
Hi all,I have put 3 radio buttons on the screen(not with parameters, please pay attention) however they all can be selected, but I want just one to be selected. I want to group them so Just one could be selected but how?Thanks.
Hi frndz,We are going for upgradation from 4.6C to ECC 6.0. Can anybody send Upgrade related documents related to ABAPer.mail Id -- steve_b4u2003@yahoo.co.inThanks in advance,Steve
Hi all,Can any body help for how to use package size in select statemtent.I want to seletc record in lot of 300 form 10k records.And i am using 4.6c version and wnat to know this statement (package size) is there in 4.6c.I know it is in 6.0.
hi all, I need to find the customer desciption, for a particular customer.where can i find it other than in table KNA1?thanksnayan
HI ALL,I HAVE AN STATEMENT LIKE THIS "12.5% VAT TAX OR VAT IS 12.5%'I WANT THIS 12.5 ALONE TO FILTERED FROM THE TEXT AND DISPLAY IT.PLEASE HELP ME .THANKS IN ADVANCE.POINTS WILL REWARDED.
Hi,I would like to print the Page numbers in the Printout of ALV Display.How can solve this ?Regards,Ram.
hi expertsi have an object where iam asked to display higher level customer in the header and sub-customer below the higher level customer in the header itself, body of the screen will be document no, material, quantity, sellingprice, discounts, gst,...
Hi Experts,I am trying to convert a script to pdf data.In the open_form I set getotf = 'X' and in the close form , i get the OTf data.I convert this otf to pdf data.In the pdf output, I only have the static fields and no data.Though the number of pag...
Hi,When we display d/b table (let say vbap) by se11 then it will display all the fields in the sequence same as we defined it in table structure.["vbeln" then "posnr" then "matnr" etc]now suppose i want to display 2nd column as 1st and 1st as a 2nd [...
if we send fax to german client it should come in german and for us client it should come in englishhow do we get this
| User | Count |
|---|---|
| 5 | |
| 4 | |
| 3 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |
