This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Good day,I am trying to find out if it is at all possible to acess the information that is stored in the Audit logs directly from somewhere in a SAP table, is this information stored like this, in a table, or only in the audit logs?Thanks
Is there a FM I could use to easily change current number(NRIV-NRLEVEL)? I made a quick try with NUMBER_RANGE_INTERVAL_UPDATE but couldn't make it work, at least not yet.An example code would be greatly appreciated.
Hi,I have one requirement in the report i.e. <b>Present Value :</b> 44567.98 <b>Expected Value :</b> 0000004456798In the present Value how will I remove that decimal point and how to add those six ing zeros. I tried with CONVERSI...
Hello People,i have a problem with OLE. Can someone help me?I want set the FitToPagesTall and FitToPagesWide property of the PageSetup Object to 1 and 100. Also i had to set the Zoom Property to False.<a href="http://msdn2.microsoft.com/en-us/library...
Hi, can any tell me ..how to run the bdc thru job scheduling ( SM36 ). In my BDC I have Used GUI_UPLOAD function.So I want to Upload the data thru scheduling.Thx & Regards,Sunder.
Hi experts,I need to ftp a file from the local drive to one of the servers on the landscape. I have the following information:1. hostname,2. IP3. username4. passwordCan u please advise on the code to use the above paramaters and ftp the file. Thanks ...
Below mentioned is the Dump.An exception occurred that is explained in detail below.The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', wa not caught inprocedure "HR_TIME_RESULTS_GET" "(FUNCTION)", nor was it propagated by a RAIS...
Hello All,I want to use for all entries statement two times in one select statement. Is it possible to use?Regards,Lisa.
Hi All,I'm trying to default the field bveki of infotype 0101 but for a certain reason the value displayed in the dropdown is not corresponding to the default!!!I'm using HR INFOTYPE OPERATION but i don't know what is behind the infotype 0101..Thanks...
Hello. Here is the problem: Function_1 calls Function_2 without providing exceptions in the call. Function_2 raises an exception (message e(xxx) raising yyy) and because it isnt handled by function_1 a nasty error message is displayed. Question - how...
hi gurus,pls send me the step by step procedure for disable the access key.regards,anuj
Hi Abapers,When i execute one report, its going to dump and thereby giving runtime error "UC_OBJECTS_NOT_CHARLIKE". I checked attributes of this report, unicode check box is enabled.Im getting this error at 'strlen' function: DATA: CTEMP(80) TYPE C,...
Hi all,Can any bdy please give us an example of adding a tool bar to ALV Grid. We have a requirement to add an Insert Button to ALV tool BAr. Where should i look for it. Which parameter contains this information.Thanks in advance,Kulwant Singh
Hi Friends,I've created a program that allow to change the <b>unit of measure</b> of a material master (add new unit <b>USE</b>). But wrong when I used BAPI BAPI_MATERIAL_SAVEDATA to do it. The message error as below: "specify the conversion facto...
how maintain standard texts using so10
example for table control
Hello,I didnt get any help with my 'Connection refused' problem (posted sep 18th) so I uninstalled everything and tried reinstalling it. I worked out, when it wouldnt install, that the error message saying it's detected an 'Existing database instance...
Hello All,In SAP scirpt I have to display a table which might have variable number of line items. So in box command I cannot mention the height statically. Is it possible to specify that dynamically like by using a variable and incrementing it every ...
In Smartforms i have used include text to display Header text of an invoice .I provided all the relevant details for the include text such as,1:text name:wa_vbdkr-vbeln2:text object-vbbk3: text -id-00014:language-nast-spras.The problem is in the outp...
hi all, i have to relate sold to party for my sales order data in my report , can anybody let me which table can be related to vbak, veda vbapthnkx
Hello Everybody,In a module pool program all the desc and other relavent data is getting displayed for all the barcodes(ean11) except for ean11 8850124035967 (a 13 digit no ) .Its working fine for other 13 digit number, but only for this ean11 its g...
Hello ,Im trying to create custom f4 help on code. Below is my code. I have appended the f4 help table with 3 records and the f4 pop up window is displayed with no values but i could c in the tittle that there ' 3 ENTRIES FOUND' but they r not gettin...
Hello to everyone.I have got a question about lock objects.There is a Z-table in abap dictionary. During the processing of my report some strings from this Z-table are selected. To select strings i use the SELECT statement. But there can appear the s...
Dear Gurus, fi cunsultant add one field in spro in editing coding block with name zzsal_office. when in vf01 billing document will create that time sales office will pic from the sales order and populate in zzsal_office.Please give me solution and te...
Hello allI've problems with sending mails. On one system my code is sending them correctly and on another is not. I was wondering if there is SAP transaction to send mails (I know that in SOST I can see results of sending) That way I would know if it...
Hello Expertdo you know where i can find (tables) data contained in wrong idoc?I have 2000 MATMAS idoc in wrong status and i need to create for all these materials new idoc , therefore i need a list of all materials memorized in these idocs.Do you ha...
Hi All: I have to create an inspection lot from file info. I'm trying to use this BAPI 'QPL1_INSPECTION_LOT_CREATE' but always return an sy-subrc error value. Could anybody give me some input for the required fields that need to be populated in eac...
Hi everyone,I was give to add a few lines of code to a user exits 'exit_saplbarm_001' and 'exit_saplbarm_002'. I went to transaction se37 to change the function module exit_saplbarm_001.But it is not allowing me to change the code there.So i created ...
I am getting message ''update was terminated" in sap inbox when i trying to deliver the sales order by vl01n .It is showing the message that a delivery is generated but when I am checking the same in vl02 ;it is showing delivery document does not exi...
Dear all, I'm having a problem sorting an internal table. The table declaration is something like this DATA: BEGIN OF ITAB OCCURS 0, DOKNR LIKE DRAW-DOKNR, DOKAR LIKE DRAW-DOKAR, DOKVR LIKE DRAW-DOKVR, DOKTL LIKE DRAW-DOKT...
Hi Experts,I wanted to select all material from Mara where 12th digit is matching with S,R and F. How to write in Select statement ?I have used like : Select * from Mara into table it_Mara Where Matnr IN Matnr1 AND Matkl...
Hi SDN,How to create a new workflow container in a work flow builder?Regards,Rahul.
Hi,in my iDoc XML I have six E1EDT13 Segments with different qualifiers and I want to know what they stands for. Could anyone tell more about these qualifiers?Here my xml snippet: <E1EDT13 SEGMENT="1"> <QUALF>006</QUALF> <NTANF>20070919</NTANF...
Hi I am trying to develop a report, with screeen painter, using 4.6c version.when i click on Layout editor , it doesnt show the screen from where I can drag and drop......and gives the message No RFC autorization for user.I havent worked on 4.6c. do ...
Hi All, For a requirement I need to maintain the classification of a material by copying from another material. This i have acheived using the below Function Modules1) <b>CACL_OBJECT_VALIDATION_MAINT</b> to maintain 2) <b>CACL_CLASSIFICATION_SAVE...
Dear gurus.i want to write user exit ( EXIT_SAPLV60P_001 ). when i m passing the access key and pressing the change button then i m receiving message ( source text of an exit function can not be changed ).RegardsMaqsood
hi guyz,my query is:im updating table... when i run the program...i should have output saying how many records are successsfully updated..and how many records are failure ..when it is a fail i shud know customer number aswell..plz advise..regards
Hello experts,I would like to use TYPE STRING as declaration in the report and statement PARAMETERS (PARAMETERS : i_param type string)error message "The deep data type 'STRING' is not allowed"Could you give me help how set up parameters, which...
hello all,i have a custom table for which i generated table maintenance dialog. its fine in Dev. system. when i transported it to Quality, the request had import error saying the screen has error.particularly error is 'field PROCESS BEFORE OUTPUT' ha...
hi i have to convert a character value '23.4' into exchange rate format i.e, '00023.4000'which is also to be stored in char format.please suggest.thanks in advance
Hi evrybody,A customer report is handling a high volume of data and takes very long time.We would like to execute it using mass activity principle (OSS not 144461)Do you think if that can help us improving performance ?Can anybody explain what we hav...
Hello Experts, My selection screen's parameters is based on different tables like VBAK, LIKP, MARA and LIPS. Now, How do I code my select statement since my selection screen is based from different tables? I want to avoid using JOINS for this scen...
Hello,we are facing a problem with the limit of 99 function modules per function group. We have reached this limit and we had to create a new function group. The problem is, that we want to share the global data between those function groups. We have...
Hi,Can we built trusted relationship between two systems with different client.Regards,Pranshu
Hi,I want to print delivery address , in that i am facing one problem .when i print customer delivery address ,the street value is brokening if its more than 35 letters.Actual street length is 60, i am not able to getting remaining 25 characters.the ...
Hi Experts, I need to pass the values from hrp1000 of stext field to my custom structure of field(it is a listbox).how to pass to this.pls help me .it is very urgent to me. regards,prasad.
Hi ,I am newbie here . Now I have problem while creating a logical portI got a error " Es fehlt die Berechtigung für diese Funktion" in German.It means that I 'm not allowed to perform this function. Does anybody have the similar experience ?Thanks ...
Dear All,I am facing the problem while uploading data with BAPI_SALESORDER_CREATEFROMDAT2 function , i am not able to upload the item condition's amount for conditions type 'ZR00' and 'ZL00'.Other Informations i am able to upload , but problem is com...
Hi guys,I have a user exit FUNCTION EXIT_SAPLBARM_001.I need to add 4 lines of code in that exit.Can anyone please tell me the steps to do that?Thank you.
hi all , how can we know which index is triggered in perticular select statement ? is that just based on the fields which used in the select statement or can we know from ST05 ? thanks,ram
| User | Count |
|---|---|
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
| Subject | Likes |
|---|---|
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
