This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Hi:I need to perform some validations on transacction <b>FS00</b>...I found this user exit <b>GLX1028</b>, but it doesn't work for me...This is my scenario..I have create an ALV maintenance program...Make up with fields from SKA1 and SKB1...If you fo...
HI guys,I have a requirement like i need to make some fields display only based on the entries in that z table only.for eq: take a z table z1 which has 3 fields f1, f2, f3 if the table is empty the user can enter the data no problem in that.If user e...
Hi all, I need a F4 help for a field in select-options. when i use the code AT SELECTION-SCREEN ON VALUE-REQUEST FOR OBJID. it is asking for low or high value but i need same F4 help for both low and high value of OBJID.How can i achieve this withou...
Hi How to count Value based on a header level Characteristic???Example:Header shopping cart Item Count 10000 1 1 2 0(it shld not be 1 here as i...
Hi Experts,I am trying to post the Idocs to BD87 to reprocess the IDOC. I have written the BDC program to BD87 to reprocess automatically if you you give the idoc no as input. I have done recording for BD87, but i am not able to capture the selected ...
Hi Everyone,My requirement : Automatically copy header text from Purchase requisition to PO. I came to know that we can achieve this through BADI <b>ME_REQ_HEADER_TEXT</b>. But I am not too sure as to what approach need to be taken. If anyone has thi...
Hi Everyone,<b>My requirement</b> : Automatically copy header text from Purchase requisition to PO. I came to know that we can achieve this through BADI <b>ME_REQ_HEADER_TEXT</b>. But I am not too sure as to what approach need to be taken. If anyone ...
Hi,I want to provide some functionality to display a list of records based on the Delivery type. If delivery type changes, then as in the normal report, it should display the next records in the new page.And after that i have to provide some text aft...
hai abap developersi want to know how to create pf-status plz explain me in detail
Hi all.I'm using FM HR_INFOTYPE_OPERATION to upload data to some infotypes. I'm using BAPI_EMPLOYEE_ENQUEUE before I call the FM, and the BAPI returns no error, which means the employee has been locked, but when I call the FM it returns "Employee/app...
Hi All,I have a requirement to calculate the Employee cost amount. For this, gather the monthly (P0167 – PERIO = 1) amount from P0167 – EECST for BPLAN = MEDC,MEDP, DENT, and VIS. Add the amount for all plans together and the total is the Employee c...
Hi, there is a standard program available for retrieving the assets for the given cost centres on the selection screen.Our requirement is instead of cost centre we have to retrieve the assets for the given cost centre group.We have to find all the ...
Hi Experts,I have doubt.Change requets are having ID like D11K93213.Regarding naming.....I got "D11" as of development client. But i didnt get anythng about "K" .Can you please clarify this. Is there any standard naming conventions for this.Thanks an...
what is interface programming.? what is diff between bdc &bapi?
Hi,I am getting TAX CLASS FROM MARA-TAKLV and how/from where do I get the TAX rate depending on TAX class or material number..Any help would be appreciated.Thanks,Y-
hi experts i want to write my content in bold .like write : 'this is good' .i want to print it as <b>this is good</b> .plz help me to do it
All,We currently have Master Data Synchronisation enabled in order to create a Business Partner with role UKM000 (Customer Integration via XD01), which works fine.Now what I need to do is automatically create a Credit Segment for this newly created B...
what is the diff between table & internal table?
hi, I am having table control without displaying the data.but when i click the display i want to display the records..but i doesn't display...i dont know why...i paste my code...c please..... TABLES:EKKO.DATA:OKCODE LIKE SY-UCOMM.DATA:BEGIN OF ...
Hello All,i am running a normal report in background which is containing write statement.when i starts a job through SM36 and runs it immediately, will there be spool generation which will contain all the list output data came through WRITE statement...
Hi All,i am new to sap-abap, i got this work and i m working on this can any body help me in writing code, plz help me, this is very very urgent.here i m giving my logic, can anybody send me the code related to this logic.this is very urgent .this p...
Hi ,I have a requirement , when a quotation is created with reference to another quotation the a new WBS element should not be created instead it has to be the same as the one of the reference quotation . Is there any exit or routine where i can code...
Hi,I would like to change the plant in Purchasing requisition with bapi, but the structures of BAPI_REQUISITION_CHANGE dont have a field to change a plant (WERKS).Can you help me?Thanks!!!
Hi All,I would like to learn SAP workflow. Please send me some good material to step in from basics to advanced . I hope step by step material with screenshots would help me a lot .My Mail id : [email protected] Appriciate your help ...Regards,...
Hello friends,I just read few blogs and articles on BADIs and therefore, am kinda green in this area. But BADIs seem to be a way out of a problem that I am facing now. I must add a new field to a report generated by transaction MB25 which is a standa...
Hi, After implementing the note, I ran report RFIDITCVL and depending on document date, I get a message: in table KONP entry 0000012788 not foundCould anyone tell me what can be the reason of it?Thanks in advance and regards
hi,what is meant by change pointer and change request in sap r3plz can u any one notes or link on this , or if possible briefly tell about this..i am looking for clear idea on this..thanksRuban
Hi Gurus,In purchasing order what r the user exits available in sap?regardsT.Reddy
Hi expertsI’m looking for a solution to launch and open SAP through SAP GUI for Windows using a BSP page (Business Server Page).I need to authenticate to BSP page with X.509 certificate and access to SAP with SAPGUI for Windows from the BSP, without ...
hi,plz send any doc or link how to monitor idoc in R3 in production.if idoc status in 51 and 66 means what i have to do?thanks RubanMessage was edited by: ruban R
I want to display content of internal table using table control.Please give directions on how to do this from start and step by step.Thanks in Advance,Saket.
hi pals,how to search table in R3..like if i go to se16..then if in enter *ara then f8 should give table details..is it right..or se 16 i have to give ara like this..plz correct me how to search in se16 or other than this tcode se11 only...is it ...
Gurus,Is there any possibility to find the changes done for abap code with out genrating version. Please let me know.Lets say i have created a program on Day 1 and on Day 2 i made minor changesHow to find the changes i have done on Day2. Thanks,Sunee...
Hi All,In the file handling, Before writing OPEN DATA SET, I want to know the file is already opened or not.Please help me out in this regard.Thanks and regards,Mallareddy
Hello, I have a requirement where i have to write a file in tab de-limited format into an application server. Request you to share your inputs for the same. The challenge is to write it in the Tab Delimited format.Thanks,Rahul.
The purpose of this enhancement is to flag shipments where the Loading End status has failed to be set during RF loading . This flag can then be used to identify these shipments so that a scheduled job can attempt to re process them.This process is K...
Hi Gurus, i'm trying to assign some roles to Tcode PP02, run the recording, perform the mapping, finally running using call transaction. no syntax errors, but no output.can any one suggest.TABLES: pernr, YHR_00_ROLAUTH.INFOTYPES: 0000, 0001...
Trisha
The purpose of this enhancement is to flag shipments where the Loading End status has failed to be set during RF loading . This flag can then be used to identify these shipments so that a scheduled job can attempt to re process them.This process is K...
Hi, I am working on interactive report.How to add a colors to each fields in the output. What is the database table for this.RegardsSrinu
For orderclassification we have a characteristic which we want to relate to pernr.the problem is that we can't relate to pa0001 since that table has multiple keys.we want to have an F4 possibilty for the users who need to fill in this characteristic ...
1.What is the pick statment do? 2.What is the different between sesstion method and call transaction method and suppose I used one method to transform the data next time suppose I want transform the data which method I can use. 3.What is single and u...
Hi all, I have an requirement such that I need to update the serial numbers for a line item that are coming from third party system and these serial # needs to updated in the PGI processing of delivery. I have searched in the SDN , but could no...
Hello,we want to use LES with handling-unit management. For this we have to create inbound-deliverys without any reference to an purchase-order. Manually we can do this via TA MB1C with movement type 501 for a handling-unit storage location. In this ...
trisha
Hi,I have an ALV which has a field type DEC.The ALV is open for edit.Once I put negative number in, I get the error message DB745.This error is retrieved from SAP code and I do not see any reason why.I checked the field cat and it looks fine (ref to ...
hi experts,i have a requirement to insert data in data base table from internatal table.it_totstk1 is internal table.zstock1 is my database table.please check out the loop condition below i am unable to insert all the records in the database table it...
Example Gowri
Hi,In my program every time I need to create idoc and I need to create handling unit number. I am calling standard idoc so inside of idoc only the function module ‘HU_PACKING_CREATE’ is there to create the handling unit number. For this I need to giv...
Hi ,if i create table and i want to do TABLE LOCKING & UNLOCKING based on the user then what i have to do .gowri
| User | Count |
|---|---|
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
| Subject | Likes |
|---|---|
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
