This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Hi All,I created a substitution according to the steps. Only one doubt is left pending i.e., In substitutable fields i want a field called Section code which is available in bseg table for line item display. It is not showing up in Substitutable fiel...
Hello All, Can u plz send me the procedure for implementing data migration workbench procedure using Emigall
Hi when I create phy inv document from MB1A it dont ask account assignment , but when I try to create from via Bapi it gives error message in return table "Account 31210002 requires an assignment to a CO object "How can I fill acc. assg. ? or it is ...
Hi Experts, Could you please tell me how to display alv in three tabstrips using oops abapBest answer rewardedRegardsFareedas
how to search roles by Query in SAP BW?
Hi there,if I build a select-screen i can useSELECTION-SCREEN BEGIN OF BLOCK ... WITH FRAME ... TITLE ...So it is possible to set the frame title dynamic (using INITIALIZATION).But how can solve this if i have a "real" abap-dynpro ?Thanks.Thomas
Hi All,We are upgarding the client system from 4.6C to ECC6.0. I got an DUMP error stating that "short dump "LOAD_PROGRAM_NOT_FOUND" ". The program RSBDCBTC_NEW, which no longer exists in ECC 6.0. How to resolve this?.Code SUBMIT rsbdcbtc_new WITH ...
Experts..Im doing an enhancement in an alv list. Problem is the select all and desselect buttons are not working.Im wondering what causes this.. it uses the fm REUSE_ALV_LIST_DISPLAY. I dont know where and how to fixed this..Please give me advise on ...
Hi,I am using alv grid display.I am having one currency field netprice.I want it to be displayed as blank when i am not passing any value.But it gives 0.00 when it is not having any value.How to make it blank instead of 0.00.Points will be rewarded.R...
hi, when creating program, or creating subroutine, there's some system-generated comment. eg.&----*& Report ZZKTEST1*&&----*&*&&----how to change that comment to another one but also auto-generated?
Hiwhy v use chain and end-chain in module program ?
I have created an internal table which has values BP number, Contract Account and amount paid. i would like to add the amounts paid per business partner and per contract account and only display the total amount paid per business partner and per cont...
how to find the idoc process code.i searched on we42 and we41. but i want particlar basic idoc type process code.
Hi What is the actual purpose of hide statment ?
Dear Friends, I hav a requirement where i need to send a IDoc a system whenever there ia SalesOrder generated with a the NET VALUE greater then 10,000.Dear friends.....Pls help me in solving this issue ,and pls give me a detail...
HelloI have a few customizing tables.. They told me to put them in an IMG.Totally have no idea where to start so if anyone has any experience with Implementation guides??Thanks
HiI have a work area which i have declared like a table.One filed in the work area is of type CHAR and length 12.I am adding a value to this workarea of type CHAR.But the length is more than 12. So the variable name gets truncated.Can someone please ...
Hello Friends,I have a internal table link this:NAME AGERAJ 26RAVI 32RAJ 26SOM 29SOM 29How can I display only unique name from this internal table?My o/p should look like this:NAME ...
Hi all,I designed a custom program which sends out mails. The customer wants to maintain the body text in a table. Is it possible to maintain this text in SE61 and read it from the DB. If yes, how can I read the text ?tia
Hi all, I have a problem with refreshing ALV.For ALV functions, I use function modules, not class/methods.I did create EVENT_EXIT ls_event_exit-ucomm = 'UPD'. ls_event_exit-after = 'X'. append ls_event_exit to t_event_exit. I also attach this table...
Hi! I'm a very beginner in ABAP so please don't hurt me for my question. On my dynpro I have two fields which the user has to fill out. One for the month (01 - 12) and the second is for the year (4 characters). Now I want to validate both fields in P...
Hi,I'm creating a program to display the modifications to materials.Therefore I am using the field cdpos-tabkey.I found out that the plant of the material can be found in cdpos-tabkey + 21(4).Does anybody know if the sales organization can be found i...
Hi What is the difference between select single and select upto 1 row?
hiwhat is the major difference between RFC and BAPI ?what is the major difference between RFC and Function module ?
Hi,In which tables all Y/Z programs store?
Dear all,can you provide the solution for the below.i have a module pool program, i need to know all the users who have changed the program from so and so date to so and so date.RegardsVenkat
Hi,I'm vish n BI consultant,Can any one pl. tell me have u ever created ZTABLE in the real time, if created then what is table name, discription, field names(2 or 3) n discription.Have u ever used data type currency, quantity and unit.
Hi Experts,How do you handle Standrad user-exits (USEREXIT_CHECK_VBAP) from 45b to 47. Automatically code will import ? Any procedure is there? let me knowRegards,Raju
I have a bizzare issue with dynpro behaviour with a screen I am creating on an ECC5 system. The ok-code field is not being filled. When I create this same screen on other systems it works fine.Is there some config setting which controls this?It also ...
Hi experts,I want to determine what method is currently running. Backgourd:I have one implementaton of a BAdI method. In this method I want to call other methods of other classes that implement the BAdIs interface. This call must be dynamic.For that ...
Hi all,Please tell me BAPI to create STO requistions.Currently using BAPI_REQUISITION_CREATEUsing doc_type = UB AND item category = '7'Any suggestions welcome.Thanks,
Hi Experts,In the selection screen there are 4 parameters out of that only 2 will be activated at a time based on the radio button selected by the user this I have done thisBut problem is one parameter is mandatory and when user select the next radio...
hi experts, i have to use infotype 0210 in my project.Does any body can tel in which idoc we wil find the infotype 0210.
Hi,Can anyone let me know the replacement of WS_QUERY. Thanks,Sirisha.
Hi,i want to see the SE38 CLASS-POOL program of a global class.how can i find it?krishna.
Hello,I have to display some documents in a loop with SAP Document Viewer using FM ARCHIVOBJECT_DISPLAY. The problem is that the FM is called a few times, depending how many documents I have to display, but the documents are opened in the same window...
How to change Additional selections radio-button from none to Document numbers in CALL TRANSACTION BACKGROUND MODE..............................................Edited by: Raghavender Poosarla on Apr 8, 2008 10:32 AM
Hi All,What is the exact difference b/w Class definition and implementation in OOABAP, What is exact purpose?Please let me know.Akshitha.
Hi,I'm using mseg table and I'd like to display the total, how can I show the total of the quantity at the end of my report.I'm doing the following but it's not working: total = 0. LOOP AT t_mseg_w INTO ws_mseg WHER...
Currently FM SO_NEW_DOCUMENT_ATT_SEND_API1 generates .xls format, my requirement is to generate .txt fromat with tab delimited fomrat. Can any one help out in this plz? its very urgent
Can anyone explain in detail how to correct output QUAN/CURR errors
Hi,i used the FM HR_IN_CHG_INR_WRDS to display amount in words.now im able to display the output as'Fifteen Thousand Five hundred one Rupees Fifty Paise'.but my client doesnt want 'Rupees' and he needs 'Paise' before 'Fifty'.he requires output as 'F...
Hi, Could you give me list of Tcodes frequently using. And use of those Tcodes?Thank you
Hello Members, I got so many user exits in Sales and Distribution.Basically they are included in the includes MV45AFZA,MV45AFZB AND MV45AFZZ.When i am going to this includes so many user exits given with FORM and ENDFORM.But to use this FORM and END...
Hi Experts,I was customized the RFITEMGL prog. into Z prog.When I am trying to CTIVATE it, am getting the ERROR that, BSIS IS NOT DEFINED FOR THE CURRENT LOGICAL DATABASEThis is at the statement of GET BSIS.pls. let me know that,1 - How to fix it?th...
Hi guys,I am new to workflows. Can any one please help me out in finding the standard workflows for the following concepts. I was asked to find out and analyse the standard wrk flows for these thingsMaterial Master Extension Workflow (ECC )Receipt Ro...
hi gurus,i am using the F4IF_INT_TABLE_VALUE_REQUEST function module to populate an F4 help. I am getting a weird situation.this is the code i am using:CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' EXPORTING DDIC_STRUCTURE = ' ' RETFI...
Hi All,While doing the MIGO we enter the Shelf life expiration date.My Requirement is that , for a material with no minimum shelf life period while doing the migo , i should not enter shelf life expiry date and therefore skip the message'Enter the sh...
Dear All, Have mada an ALV report, but in some column have to show long text like."Qty of Processed Finished Goods receive with wt/length/pieces / units "but while display of ALV it's showing only : " Qty of Processed Finished Goods rece...
Hi All,We are integrating our product with SAP. Whenever some status changes in the SAP DB will reflect in Oracle DB. How can i do this task?Thanks in advance.Pon
| User | Count |
|---|---|
| 6 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
