This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Hi all ,Iam trying to implement the OSS Note 170334 in the SNOTE transaction. When I hit Implement, I get a message -"SAP Note does not contain valid correction instructions" .Could any one help me what to do now. We are now using ECC 6.0. Thanks in ...
Hi Friends,Based on sales order number and partner function in which table i can findout partner number( PARTNER) and its Address( NAME1) of that partner function. Its urgent can any one replay me.
hi,in CREDIT MEMO smartform, i have to display page number and total form pages ( e.g- 1 of 10 ), i am using sfsy variable formpages,it is working properly for total pages upto 9, but when total pages are 10 or greater than 10 it displays as 1 of *, ...
Hi all,A warning message is being displayed for the Inbound part of the IDOC.Here is the message.No filters , No conversion , No version change .IDoc successfully processed in the ALE layer The IDoc has passed through the ALE layer successfully an...
Hi Experts, Please tell me the steps and the function modules used for retrieving the routing long text ( which i had created in CA02 ) TRANSACTION .Regards,Siva
Hi All, what is the difference between creating a module pool from se38 and se80...???and if we create a module pool does it create by default some includes???plz expalinThanks & Regards.Ashu Singh.
Hi Gurus., I am little bit confused over Persistent Objects.. Y we need to use Persistent Objects.. Is it equal to Enquee/Dequee process of normal abap ..Regards.,S.Sivakumar
Hi All,A background job has been scheduled to run every minute.It was working fine but a few days back it did not get scheduled for 2 hours . Any suggestions as to why this might have happened.TIA.Vartika
To create Heading line in an excel sheet, the parameter "fieldnames " works fine if the internal table is created like : DATA : BEGIN OF itab OCCURS 0, field_name(20), END OF itab.but we are restricted to use internal tables without header ...
Hi,I am working on HR -ABAP where i have a scenario to retive employee photo and disaplay as output in smartforms.And these employee photo are stored in Cluster table SDOKCONT1 in SAP Archive Link (storage type - SAP System Database). Anybody can tel...
Hi ExpertsI have created assesment cycle for transfering cost from an cost center to an statistical order. While executing assesment cycle in test run, it executes successfully. But when I take out the test run tick, it gives above error.Pls helpRega...
when using this function module(PFB), we get a dialog box asking to 'Generate', 'Replace' or 'Extend' a file Is there any way to disable the 'Replace' & 'Extend' buttons.OR Any other function module which allows to browse the path for the file to...
Hi guys.I have ALV-Grid in which fieldcatalog is created based on DDIC-Structure, let's name it 'STRUC'.There are 2 fields A and B. In 'STRUC' a complex F4 is seted for these fields: A and B are imported parameters for F4 and B is exported parameter....
Hi, I have an order type ZRA and related to it are four output types two for shipping and two in sales.i.e. four outputs which trigger emails for a ZRA order type :1. ZECO.(sales)2. ZERP.(sales)3. ZERR.(shipping)4. ZERS.(shipping) I have to hav...
Hi Gurus,when i create a billing document through BAPI ,in fb03 t-code i am getting same value for Document date and Posting Date For Example today i am creating the billing doc,if i give the Doc date as 06/03/2008, the posting date also it is showi...
Hi all, Can you tell me the step by step implementation procedure of ALV grid
how we can analysis the reports PLS give me sutiable information \[removed by moderator\]Edited by: Jan Stallkamp on Sep 3, 2008 3:52 PM
HiI am trying to post GL using bapi bapi_acc_document_post.How many lines items bapi will accept and tell me the reason for the same?thanks in advance
Hi,I have to restrict the user from signing in to R/3 system through single sign on from Portal ,If he/she already signed in. How to do that,Even though if we set theprofile parameter login/disable_multi_gui_login, it is still allowing multiple logon...
i want to create a upload program. i want to use module pool for tat. can experts help me out.
I have encountered an exception "RAISE_EXCEPTION" with error "NO_LIST_ACTIVE" in Program SAPLSYSF in include LSYSFU07 .The error occured in transaction SM37 while extracting a spool list in HTML format. Please suggest any solution or any SAP NOTE ...
Hi,I have a problem in downloading the data from itab to html format,while downloading the data data is getting displayed as shown belowmatno mtype 12345 typematno and mtype are headings 12345, type are the values.first record is getting appended ...
Hi all, i want to create an alv report in which i m using two internal tables and two field catalogs and the two function modules for display ....can any one tell me hw i put the logic ..if its possible then plz give reference code for doing so...Tha...
Guys, From my understanding the use of fire fighter is for emergency access in PRD. For that we can just create separate ID in sap system with almost sap_all authorization (not sap_all) and access PRD whenever there is a need.But why we need sap VIRS...
Hi allI have done a module pool which calls the standard transaction 'MB1B' using the bdcdata.The Transaction 'MB1B' returns a doc number in messagesaying 'Docno posted successfully'.Based on that number only i have to continue my module pool.Can any...
Hi,The Enhancement: V56K0001 docu. is showing like this:You can use this enhancement to make individual adjustments to the creation of IDocs that are based on IDoc type SHPMNTnn.I have released, segment, extended idoc, & in WE82 attached this ext.ido...
Hi Friends,Is there any Function Module for Rounding Off the given Value.For Example.....Say v_variable contains the value 2.81Now the decimal is more than 50 paise.. so it should round off to 3.00Say if the variable v_variable contains the value 2.4...
Hi expert,We have configure custom idoc, the status of inbound custom idoc when posting by process code is 64 (Ready to posting), How we can post with status 54, have any idea ?When I am using report RBDAPP01, it is in status 51 (Error),How I can cha...
Hi Guys,I need to simulate SD pricing for a given data e.g material, customer, etc. I am trying to use the FM PRICING but i am not able to get all triggered conditions. Can someone tell me the data required for this FM to work or are there any other ...
hi,let me konw what is the meaning of this text element editor line <(>,<)>plz explain
While creating table in se11 I am getting 2 warning message.when I check for error i am getting these 2 warning messages.1)Enhancement category for table missing 2)Enhancement category for include or subtype missing How to solve it.t...
Hai friends,i am using the following function module REUSE_ALV_BLOCK_LIST_APPEND.I want to give the heading in the top as followsPlant:Material:Report Date:before the ALV display.Thanks.
can any body tell me about The system field which ascertains function code currently active?
Hi allI have got a requirement where i have call a transaction at the back ground without allowing the user to press enter key for the bdc ok code.I have created the modulepool and also called the bdc to call transaction MB1B. But it is asking to pre...
Hi all,I need user exit for the production order confirmation so that i can set AFPO-ELIKZ and AUFM-ELIKZ (delivery completedu2019 status flag) to Blank......Thanks
what are two menus that remain unchanged in a menu bar?
hi All,I got a reqirement in ML81---when ever the tcode ml81 is executed, a popup should get prompt displaying the external number field and after continue it should display the sceond screen.Plz help me out where should this popup inserted in and wh...
Each time when we try to modify a sales order, adding a new item.We get a dump and the changes are not saved in the Data base. Could you help on this??
hello guys,Actually i am trying to call a program'B' from program 'A', using submit and return.i want to capture the output of program 'B' which is list output, i have used 'LIST_FROM_MEMORY' functional module in program 'A', to download from abap me...
Hello ,We are using the function REUSE_ALV_GRID_DISPLAY to display the ALV. the field catalog has 139 fields. However when the ALV is displayed, one field is missing. We have checked the NO_OUT and the TECH attributes and they are not set to "X". Cou...
hi all,i have a requirement to add new coloumn to va01 line itmes .i have append structure to vbap and has seen in debugging its coming ....but how to add that field to table control of line item details in va01 first screen...regards,shailaja.
Hi Guy's,I am creating PO through STANDARD BAPI ( BAPI_PO_CREATE1) at the end below message is generated. It means the PO is created, but if I check it out in transaction ME23 then it gives an ERROR ,this PO no. is does not exist. **********MESSAG...
thanks to all but my porblem is download the ALV report in background in local directry.sriram.
1. what is the prerequiste for binary search?
I have to upload F-02 TCODE...i have a sample flat file, which contains two header and their corresponding line items.Full point will be given.
Hello,I need to create a new Communication User in my Development System(ECC 6). It will communicate with a non-SAP system.Is there any standard profile which I can assign to this ID. Anything with minimal authorization?Or I need to create a custom R...
Following report that I have has a PF status Save which when clicked should mark the selected documenst in the output as selected and save . But in my report this is not happeining , it checks the doc when I press save but when I og out of the report...
Hi Experts,Am wrting a VOFM - Requirement - Routine for output control.So, here am checking a condition and determoning the SY-SUBRC value explicitly.But, after executing my ROUTINE( & determing the SY-SUBRC correctly) later, the other ROUTINE of VOF...
Hi ,Could we apply the same concept of Constructors in JAVA for ABAP.I learned the point that Constructors help in creating the object but doesnot create the object.But without constructor its not possible to create objects .Is the above point same ...
pls give me pefromance tunning (T.CODE) AND DATA BASE PEFORMANCE(T.CODE)
| User | Count |
|---|---|
| 6 | |
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
