This is the last task of the August Developer Challenge on ABAP Core Data Services. The responses we have seen so far is excellent and appreciate each one of you in taking time to complete the challenge. We have seen some good conversations about the...
First of all, thanks for the overwhelming response to the ABAP Developer Challenge. Kudos to everyone who took time out of their busy schedule and finished the pre-requisite – Task 0 last week.Now let us dive right into the challenge.Task 1 - In this...
Dear All, May i know isit anywhere to delete the Enhancement Spot?? This is my 1st time to explore Enhancement Spot. Why it will make my system slow when delete it ?? Thanks
Hi Experts, I am doing a Zreport where I have 3 radio button and 4 selet-options in the initial screen. My requirement is, if the user enters the input in the select-optionsand chooses a radio-button the event for that particular radio button should ...
Hi all,I did a recording for mm02 transaction.but while filling up the mm02 screen with material number , it is not filling up with material and error accurs saying that fill in all required entries.what can be done for this ??
Hi Experts ,I am submitting a programme from my calling programme , the called programme generates a list which i want to skip during the execution of the main programme ,how can i skip the out put of the called report from my main programme and cont...
Hello,I created a table maintenance for a table containing some field.A field is "date" and the data element is "datum": My question is : By t-code SM30, how entry a sy-datum value when the user don't fill this field ?Thank you.
Hi Experts,We have a requirement where, a service order or service notificaiton has to be generated from a contract, when the biling plan item reaches milestone. How do we achieve it ? I have checked for BADI's but most of them are for SAP internal ...
Hi,I have an issue in BDC recording. I have the recording for a Z tcode. This recording works only when Continue after commit has been checked. The recording works fine.The problem is the program which is generated from this recording. How to incorpo...
HI All ,I have large internal table (like 1000000 records ) and i want to modify DB table from it ,what i want is to do the modify in chunk i.e. to do commit after 1000 recorded each time .what is the best way to do that ?Regards Chris
Hi All,I am facing a problem in which when i want to display source code of any program(standard or Z) the system goes into working state until the time is out.All other transactions run fine.I am unable to display, edit as well as create the program...
Hi,i have defined an range in the Module Pool as shown ibelow.data : ar_vbeln TYPE RANGE OF vbak-vbeln, ars_vbeln LIKE LINE OF ga_vbeln.but how to show this range in the Layout of the Module Pool , i mean the input & Output in the Moduel P...
Hi experts,This is my first time i use HR macro (rp_provide_from_last p0001 space pn-begda pn-endda) How can i use Pernr returned from this macro?Please help me.ThanksAyman
Hi experts,Right click event can be used in table control ? and how to do it?Thanks and Best regards,Yinyan Lu
Hi all,I have a table. I want to make this table editable for only one user with se16n or another tcode manually. How can i do this? With Table Maintenance Generator ? And how?And another question is what Assign Authorization Group is ? When i have t...
Hello all,i have a requirement wherein i have to send a classical report output to PDF and trigger mail.Have almost did that using CALL FUNCTION 'SAVE_LIST', CALL FUNCTION 'TABLE_COMPRESS'.But whenever CALL FUNCTION 'SAVE_LIST' is getting executed th...
Hi,With out table decalrtion in my program how can I use mara table(for example) to get data in internal table.tables:mara(I donot want to declare)select * fromwith Regards,Jaheer
Hi,My background in SAP is procedural ABAP.I'm in the middle of trying to understand OOP with ABAP.In Java, usage of OOP is straight forward, main() will be the first method that will be called every time the program executed.However, I'm still confu...
Hi experts!Can you teach me how to fill up required parameters in tcode BPC4 using call transaction syntax. I've tried it using this code:SET PARAMETER ID 'BPDENTRY-PARTNR' FIELD i_kna1-kunnr. " Business partner IF i_kna1-ktokd = '1000'. SET P...
Hi expertsOur requirement is to add storage location & storage type check while creating process order in COR..I found that we have one user exit PPCO0005 by which we can change the storage location..Please explain me how can I do that & how can I in...
Hi SAPientz , I am working on dynamic selection to populate screen fields of transaction FS10N from my program. I am developing a custom program where by when user enters G/L account number, Company code and fiscal year it submits the value to fields...
Plz explain wht is Vim_abbort_save and when it is used?
Hi Experts,I have been using a standard report which is used to delete infotype data. Unluckily, I have forgotten that report name.Can anyone please help me with the report name.RgdsPrateek
hi to all, I created one change document object for one transaction say /tmw/tmw . Now I am trying to make changes in /tmw/tmw . table cdhdr and cdpos table are not updating anymore. but cdhdr and cdpos table are updating while passing d...
Hi experts,Is it correct to copy a Z FM from a standard FM, and assign it to a standard FG?Thaks,Ajay.
Hello Everybody,I would like to know the Authorization Object for SAP WF transaction SWI1on field TASK. I want group of users should have access to couple of entries only.For ex: Using SWI1 tcode, user can able to view all the WFlows by entering the ...
Dear experts,I want that i shall be design my custom screen and use it for user selection purpose.This screen will be able to recieve input in tablecontrol grid.At the same time it should allow me to save variants for various input combinations on th...
Hi harsh,IN PBO i am using this code.LOOP AT x_ekpo WITH CONTROL tabcon CURSORtabcon-current_line.ENDLOOP.yes you got my error ,do i need to set the logic here.thanks,bikash
Hi Experts,I want to get Badi implementation class name and interface name by passing badi implementation name.Is there any function module to find out??Thanks and regards,Venkat.
Hello All, I have developed screen exit for tcode 'ME51N' to add customer field in newly added TAB. To grayout that field in display mode, I have added code on the PBO event of that screen. Code for PBO even has been written inside the include. Exit ...
Dear All,I have used tabstrip with two taps.First problem: I face a problem to set a madatory fields in a each tab. second problem: After entering the data in first & second tabs, Once again i am going to first tab and modifying some values. But it i...
Hello Experts,I was just going through the standard program of the Tcode MB51 - Material document list ie RM07DOCS.I just found the following need some explanation on the same. selection-screen begin of block disp with frame title text-003. paramete...
hi.i have got a tricky situation on how to PAGE DOWN while entering values in table view control of clmm transaction .here i have tried with 'NP','P','=P','PGDO' but it is not working in clmm transaction for Page down to enter values in multiple rows...
Hi gurus, I tried to create a report for production orders. it contain four selection parameters. Here i am using four tables 1) crhd 2) caufv 3) aufk 4) afru 5) zbreak ( this is a ztable created by me ) . i need the fields like date,work centre, p...
Hi,I am developing a report which willl show the cycle time for the material which is sended outside for work and then returned to the plant. I want to know what are the movement types which are used in it and if possible table also?
Hi,I'm working as a functional consultant in MM, I thought it would be good to start learning ABAP to help me with enhancements, debuggging .. FS creation etc.We have a sandbox system in our company and I wanted to write some code and start learning,...
Hi,I need to create a MIGO for imported parts. In the MIGO transaction I need to remove the commercial invoice number from the pop-up screen and then after entering all the details I need to put the MIGO on hold.Is there any BAPI available to do this...
Hello I know that the syntax for dymanic read table statement is READ TABLE <ITAB> WITH KEY (KEY1) = VALUE1 (KEY2) = VALUE2 .....(KEYN) = VALUENHere is my problem..I am dynamically creating an internal table based on parameter table entered by user...
Hi all,I have one new requirement . When Materila is creating in MM01, I want show the required Material types in screen.I want to block the non used Material types with out removing in T-table.I have to do same for VA01, I mean sales docuemnt type...
Hi ABAP Collegues,I need to know if there is an ABAP function module or an ABAP system function to get the current dynpro (number and program) for a given ABAP user.What I'm looking for is similar to transaction SM04 that shows the transactions where...
Why should we Clear the ok_code in ABAP prg?
Hi all,We we are using this bapi to set the TECO status in a work order.After the status is changed, we access the order (IW32) and get the correct status information but the fields are not disabled as when you do it manually.Can any one help me?Rega...
Dear all,I have a problem.In ME21N, I need to show a warning message (message w... ) when user enter an already-used-before input in "Our reference' field (EKKO-UNSEZ).I've tried in two methods.1. Using fm EXIT_SAPMM06E_004. But it can only works for...
Y do we every time initianlize ok code?
Dear All,In C011N transaction i have created the user defined screen and created a two fields.In that two fields I will enter some value of labor time.That labor time which i enter has to get updated with the corresponding labor field under the activ...
Hi all,I have made a ALV grid report which shows PO details as per the user requirement.It contains value and currency field also. When I sum up the value column its gives the total, But the user's requirement is that if there are other currency tha...
HI GURUS,I AM USING TWO TABLE CONTROLS AND WANT TO SHOW THE SELECTED RECORDS IN THE SECOND TABLE CONTROL,ACTUALLY FOR THE FIRST TIME IF I SELECT RECORDS IT IS SHOWING CORRECTLY IN THE SECOND TABLE CONTROL BUT WHEN I AM BACK TO FIRST TABLE CONTROL AND...
Hi friends, I have a table control with records. If I select some of the records and press a push button, I should show the selected records in another tablecontrol in other screen. It is working fine.But, for example there are 10 ...
HI GURUS,HOW TO REFRESH OR CLEAR THE DATA OF A TABLE CONTROL.THANKS,BIKASH
can any body guide me what is table & field for specificationwhat is table and field for specification and attribute characteristics ( selected set) in result recording screen,because i want to data in alv report numerical and non numaricals
Hi all,I have created the web service thru SOAMANAGER.Now I am just trying to access that web service in Visual Studio 2005.I am not able to access...Please give me the procedure , if any body knows.-Balajee Jeyaraj.
Hi ,while saving data FMBBC i am getting saved message , after that if i come out of the Tcode i am getting message asExpress document " update was terminated".I was debugging the standard code found that the error comes from SXOP table entry, This t...
| User | Count |
|---|---|
| 6 | |
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
