ACT_UPG phase

[#1]

Hi all,

I am applying EHP6 for ERP. During ACT_UPG phase I tried to stop shadow instance and incress some profile parameters and rester shadow agian and repeat the ACT_UPG phase again.

I have selected as Batch process 3 and maximum uptime process 1 and R3trans process 3

There is no error in TCO st22 or sm21.

I can see the batch job

RDDMASGL is active and form job log I have this massage:

Job started

Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC)

Start of mass activation 08:47:41

And I have just one batch job runing in SM50.

BGD     14939     Running  Yes  6826  RADMASDSC  000  DDIC

And non og logs, tmp or data logs in /abap/ in shoadow  get update.

My question is should I restar sap server after changing profile parameter for shadow or it is enough with restart shadow instance?

---------------------------------------------------------------------------

I have this log from last part of SAPup.ECO from shadow.

### Phase MAIN_SHDRUN/ACT_UPG:

SAPup> Starting subprocess with PID 15031 in phase 'ACT_UPG' at 20130911084738

    ENV: DIR_LIBRARY=/r3d/mnt/R3U/start/SUM/abap/exe

    ENV: JAVA_HOME=/opt/java1.5/jre

    ENV: LD_LIBRARY_PATH=/r3d/mnt/R3U/start/SUM/abap/exe:/r3d/mnt/R3U/start/SUM/jvm/jre/lib/ia64/server:/r3d/mnt/R3U/start/SUM/jvm/jre/lib/ia64:/r3d/mnt/R3U/start/SUM/jvm/jre/../lib/ia64

    ENV: NLS_LANG=AMERICAN_AMERICA.UTF8

    ENV: ORACLE_BASE=/oracle

    ENV: ORACLE_HOME=/oracle/R3U/112_64

    ENV: ORACLE_SID=R3U

    ENV: PATH=/r3d/mnt/R3U/start/SUM/abap/exe:/oracle/R3U/112_64/bin:/opt/java1.5/jre/bin:.:/home/r3uadm:/usr/sap/R3U/SYS/exe/run:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/gvsd/bin:/opt/ipf/bin:/opt/nettladm/bin:/opt/fcms/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/sas/bin:/opt/graphics/common/bin:/opt/atok/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/sec_mgmt/bastille/bin:/opt/caliper/bin:/opt/drd/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/resmon/bin:/opt/firefox:/opt/gnome/bin:/opt/perf/bin:/opt/propplus/bin:/usr/contrib/kwdb/bin:/opt/perl_32/bin:/opt/perl_64/bin:/opt/prm/bin:/opt/sfm/bin:/opt/swm/bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/swa/bin:/opt/hpsmh/bin:/opt/thunderbird:/opt/sentinel/bin:/opt/langtools/bin:/opt/wlm/bin:/opt/gwlm/bin:/opt/hpnpl//bin

    ENV: SAPDATA_HOME=/oracle/R3U

    ENV: SAPSYSTEMNAME=R3U

    ENV: auth_shadow_upgrade=1

    ENV: dbms_type=ORA

    ENV: dbs_ora_schema=SAPR3

    ENV: dbs_ora_tnsname=R3U

EXECUTING /r3d/mnt/R3U/start/SUM/abap/exe/tp  pf=/r3d/mnt/R3U/start/SUM/abap/var/ACTUPG.TPP put R3U

This is tp version 380.08.41 (release 720, unicode enabled)

Looking for effective putsteps ... ... ready (looking for putsteps

Any advice if this phase is working?

Thanks

[Reagan]

Hello

Make sure there is sufficient memory available on the machine.

Secondly set these parameters in the instance profile of the shadow system.

ztta/roll_extension = 64000000000

abap/heap_area_total = 5000000000

abap/heap_area_nondia = 5000000000

ztta/roll_area = 10000000

abap/buffersize = 400000

If possible restart the main system and the shadow system after cleaning the shared memory segments from the OS level.

Check the ulimits of the sidadm user. Set them to unlimited and restart the system.

Regards

RB

[Former Member]

Hello,

Thanks for help.

I Will try that too.

I will restart main system and shadow instance.

Thanks

[Former Member]

Hi

What du you mean with:

Check the ulimits of the sidadm user. Set them to unlimited and restart the system?

Some help?

Thanks

[Reagan]

su - sidadm

ulimit -a

Refer this link

http://h30499.www3.hp.com/t5/System-Administration/How-to-change-the-ulimit-values-in-HPUX/td-p/4776...

Regards

RB

[Former Member]

Hello,

I have done as you suggested but Upgrade stop det same plads with same error.

Any advice?

Thanks

[Former Member]

Hi,

Please past the dump again.

How much memory you have on the server fro this shadow instance..

How much swap is configured on the server.

Past ST02 screen shot if you have not started the shadow instance after the failure.

Please attach the instance  profile file also.

Thanks

Rishi Abrol

[Reagan]

Hello

Set these parameter values on the shadow system and check whether they help

ztta/roll_extension = 64000000000

abap/heap_area_total = 10000000000

abap/heap_area_nondia = 10000000000

ztta/roll_area = 20000000

abap/buffersize = 400000

Regards

RB

[Former Member]

Hello,

I had added St22 dump and ST02 skreen shot.

Where can I see how mach swap is configured on the server.?

Where can I see How much memory you have on the server fro this shadow instance?

I am new in Unix?

Thanks again for reply.

st22.TXT.zip

[Former Member]

Hello,

I did set there parameter values in shadow system:

ipc/shm_psize_10 = 128000000

# *** CHANGE for the shadow instance ***

#ipc/shm_psize_40 = 68000000

ipc/shm_psize_40 = 112000000

abap/heap_area_dia = 5000000000

abap/heap_area_total = 5000000000

abap/heap_area_nondia = 10000000000

ztta/roll_extension = 64000000000

ztta/roll_area = 10000000

I will try with

abap/heap_area_total = 10000000000

abap/heap_area_nondia = 10000000000

this too.

Thanks

[Former Member]

hi,

You can run glance on the server and i needed the st02 of the shadow system .

Please pass on ST06 of the shadow instance . It will show swap.

Please attach the os level instance file.

The screen shot of shadow system should have 7 gb of extended memory but this one has 4.

Thanks

Rishi Abrol

[Former Member]

Hi Rishi,

Here is screen shot of st06

Can I have some explanation for:

You can run glance on the server and i needed the st02 of the shadow system .?

screen shot is from shadow instance.

Please attach the os level instance file.?   Where can I find this fil?

The screen shot of shadow system should have 7 gb of extended memory but this one has 4.?

You mean I should add 3 more gb extended memory in shadow instance. Or incress the profile parameter?

Thanks again

[Former Member]

Hi,

What else is running on the server. this has 64 gb of memory and out of which only 5.4 gb is free when the upgrade job is not running. I think that you need to get more memory free on the server or stop any extra app running on this server that is not used and re run the phase.

If i see your swap is three times of the actual memory so should be 192 GB but is 155GB. I dont think it should impact .

you can see the memory usage when you run glance at os level.

I want the instance profile file of the shadow system.

But changing the profile parameters will not help if you don't have free memory on the server.

Thanks

Rishi Abrol

[Former Member]

Hi

Thanks for elp.

I have added R3U_DVEBMGS07_SAPUX1 profile file.

We har 2 morer installation runing in this server. I wiil see if I can stop one of this installation. Should I stop spplication server or DB server too?

Thanks

R3U_DVEBMGS07_SAPUX1.txt.zip

[Former Member]

hi

[Former Member]

Hi,

Yes Please stop all the application and the database that you can stop.

As you have configured the below parameters to 10 gb so you need to have at-least close to 20 to 25gb free

abap/heap_area_dia = 10000000000

abap/heap_area_total = 10000000000

abap/heap_area_nondia = 10000000000

Please try to stop all the servers and also set the set the em/initial_size_MB in 15 gb.

em/initial_size_MB = 15000

Then try to start the system.

Se how it goes..

Thanks

Rishi Abrol

[Former Member]

Hi

Thanks

I will try that.

Reza

[Former Member]

Hi Rishi,

The same.

Upgrade  start and when I see this fil in /SUM/abap/tmp/SAPA702EPU.R3U with size 3.643.005 in tmp directory.

The size of this file never get change in 6 houe and after the upgrade stop with:

Runtime Errors         SYSTEM_NO_TASK_STORAGE.

And every time the same file and same size.

Thanks

[Former Member]

Hi,

Can you please provide me the output of the below command and let this run.

T_cd:SE38->RSBDCOS0->ulimit -a

Thanks

Rishi abrol

[Former Member]

Hi

Thanks again.

Here is result.

Thans

Reza

[Former Member]

Hello,

Still det same The batch job continue but the fil in /SUM/abap/tmp/SAPA702EPU.R3U with size 3.643.005 in tmp directory.

Tanks.

[Former Member]

Hi,

Please also check the the command at os level.

1904979  - Different output of comand 'ulimit -a' between OS levle and R/3 level

Thanks

Rishi Abrol

[Former Member]

hello,

Here is result from OS:

sapux1:r3uadm 28> cd abap

sapux1:r3uadm 29> ulimit -a

time(seconds)        unlimited

file(blocks)         unlimited

data(kbytes)         1048576

stack(kbytes)        131072

memory(kbytes)       unlimited

coredump(blocks)     4194303

nofiles(descriptors) 2048

sapux1:r3uadm 30>

Thans

[Former Member]

Hello,

Still the same, is it normalt this situation I have?

Thanks

[Former Member]

Hi,

Can you try to set the data to the below value. Remember that you will have to get the box rebooted to get the chnage effective

data(kbytes)         3145728

Thanks

Rishi Abrol

[Former Member]

Hi,

Thanks again for reply.

Where should I do that? Where can I get the box rebooted?

Thanks

[Former Member]

Hi,

I think you need to get the unix admin team to do that.

Thanks

Rishi Abrol

[Former Member]

Hi,

Please past the below screen shot also.

memlimits -v off

Thanks

Rishi Abrol

[Former Member]

Hi

Here is result:

sapux1:r3uadm 32> memlimits -v off
SAP R/3 address space configuration test tool V3.2 (98/01/14)
=========================================================================

Verbose mode off

Check the maximum data size per process (malloc)
Check the available swap space (malloc in several processes)
Process 21475 all ... Size = 2048MB   Total: 2048MB
Upper size limit 4096 reached. Finish checking

Total available swap space = 4096MB

Check the maximum size of mapped file (mmap anonymous,dev/zero)
Check protection operations on this area (protect)

Upper size limit 4096 reached. Finish checking

Maximum mapped file size: 4096MB
Maximum mprotect size:    4096MB

Check the maximum address space per process usable
both by process local memory and mapped file

Maximum address space ( mmap(4096 MB)+ malloc(1636MB) 😞 5732MB

+-------------------------------------------------------+
|                        Result                         |
+-------------------------------------------------------+
Maximum heap size per process........:  2048 MB
Maximum mapped file size (mmap)......:  4096 MB
    measurement limited to 4096 MB
Maximum protectable size (mprotect)..:  4096 MB
    measurement limited to 4096 MB
    em/initial_size_MB > 4096 MB will not work
Maximum address space per process....:  5732 MB
Total available swap space...........:  4096 MB
    measurement limited to 4096 MB
    main memory size x 3 recommended , minimum 1 GB
sapux1:r3uadm 33>

[Former Member]

Hi,

So this is fine. We will wait for the current job to run .If it fails the we can change the data parameters in ulimit and see how it goes.

How is st02 and st06 looking currently in shadow system.

Thanks

Rishi Abrol

[Former Member]

Hi

Here is scrreb shot:

Thanks

[Former Member]

Hi,

Looks ok currently  and are with in limits .

Thanks

Rishi Abrol

[Former Member]

Hi,

Thanks Again for reply.

I hop not that stop Again. In SM37 tha batch job RDDMASGL Duration(sec) is came 10 18.421 and normaly it will stop when that is around 20000.

But still this fil in /SUM/abap/tmp/SAPA702EPU.R3U is with the same size 3.643.005 in tmp directory.

Is it normal?

Thanks

[Former Member]

Hi.

The batch job stop Again the same plads and the same error

SYSTEM_NO_TASK_STORAGE 

Thanks

[Former Member]

Hi,

Can you please try to change the  data in ulimit and see if it helps.

Please also type the command

bdf | grep SID

Please also create a message with sap if still an issue.

Thanks

Rishi Abrol

[Former Member]

Hello,

I have greate a massage with sap I am waiting for respons.

Her is result:

sapux1:r3uadm 35> bdf | grep r3u

/dev/sanvg01/lvol1 8388575232 8369096744 19326344  100% /r3u

sapux1:r3uadm 36>

I had stop alle installation on this server and try one more time. I am not sure the problem is memory.

Is it any thing I can du to see there is some problem in shadow instance. Becuse upgrade allwas stop in the same plads?

Thanks very much for helping me.

Reza

[Former Member]

I would like to change the  data in ulimit but I donot know how can I do that. there is nobody here to help me with this.

Thanks

I had tried this command again:

sapux1:r3uadm 36>
sapux1:r3uadm 36> memlimits -v off
SAP R/3 address space configuration test tool V3.2 (98/01/14)
=========================================================================

Verbose mode off

Check the maximum data size per process (malloc)
Check the available swap space (malloc in several processes)
Process 18185 all ... Size = 2048MB   Total: 2048MB
Upper size limit 4096 reached. Finish checking

Total available swap space = 4096MB

Check the maximum size of mapped file (mmap anonymous,dev/zero)
Check protection operations on this area (protect)

Upper size limit 4096 reached. Finish checking

Maximum mapped file size: 4096MB
Maximum mprotect size:    4096MB

Check the maximum address space per process usable
both by process local memory and mapped file

Maximum address space ( mmap(4096 MB)+ malloc(1636MB) 😞 5732MB

+-------------------------------------------------------+
|                        Result                         |
+-------------------------------------------------------+
Maximum heap size per process........:  2048 MB
Maximum mapped file size (mmap)......:  4096 MB
    measurement limited to 4096 MB
Maximum protectable size (mprotect)..:  4096 MB
    measurement limited to 4096 MB
    em/initial_size_MB > 4096 MB will not work
Maximum address space per process....:  5732 MB
Total available swap space...........:  4096 MB
    measurement limited to 4096 MB
    main memory size x 3 recommended , minimum 1 GB
sapux1:r3uadm 37>

[Reagan]

In order to configure the ulimit, have you tried modifying the /etc/security/limits.conf file ?

Regards

RB

[Former Member]

Hello,

No I am not shur what I shall du?

[Former Member]

Hi,

Please read the below note how to set ulimit.

Note 323816 - User limits on AIX

For all users associated with R/3 - the <sid>adm, sid, etc. - the

limits should be set to the following:

Soft CPU = -1

Soft CORE file size = 2097151 (this is the default)

Soft FILE size = -1

Soft DATA segment size = -1

Soft STACK size = -1

This can be done in one of two ways:

1. Using smit - enter the command "smitty".  Select: Security & Users,

   -> Users -> Change/Show Characteristics of a User.

2. Edit the /etc/security/limits directly using a normal editor

   like vi. You can change the default values, but if values are also

   defined for the users, you must remove them or change them also. For DB2 32bit Installations, please read related note 365314 which describes special settings for db2 environments.

If this fails we would go with higher disp+work and tp and r3trans tools.

Thanks

Rishi Abrol

[Former Member]

Hi,

I have modified this file and i want to use this instance profile.

Please do sappfpar check when you use this profile.

Please also take the copy of the old profile.

#.******************************************************************************************************************************

#.*                                                                                                                            *

#.*       Instance profile R3U_DVEBMGS07_SAPUX1                                                                                *

#.*                                                                                                                            *

#.*       Version                 = 000007                                                                                     *

#.*       Generated by user = DDIC                                                                                             *

#.*       Generated on = 12.09.2013 , 08:43:11                                                                                 *

#.*                                                                                                                            *

#.******************************************************************************************************************************

#parameter created                          by: DDIC         11.09.2013 21:37:59

abap/buffersize = 400000

#parameter created                          by: DDIC         11.09.2013 21:14:15

em/initial_size_MB = 15000

em/max_size_MB = 22500

em/address_space_MB = 4096

ztta/roll_first = 1

# Instance profile for shadow system 731

rdisp/mshost = sapux1

rdisp/wp_no_dia = 5

rdisp/wp_no_vb = 1

rdisp/wp_no_vb2 = 0

# Entries for configuring a stand-alone enqueue. Integrated enqueue is no longer supported for kernel 802 and higher.

#rdisp/wp_no_enq = 1

rdisp/wp_no_btc = 4

rdisp/wp_no_spo = 1

rdisp/max_wprun_time = 0

abap/apg_settings = off

#old_value: 2000000                                                                            changed: DDIC 12.09.2013 08:42:55

zcsa/presentation_buffer_area = 4400000

zcsa/table_buffer_area = 80000000

zcsa/db_max_buftab = 10000

rtbb/buffer_length = 70000

rtbb/max_tables = 500

# *** CHANGE for the shadow instance ***

#ipc/shm_psize_10 = 40000000

ipc/shm_psize_10 = 128000000

# *** CHANGE for the shadow instance ***

#ipc/shm_psize_40 = 68000000

ipc/shm_psize_40 = 112000000

abap/heap_area_dia = 10000000000

abap/heap_area_total = 16106127360

abap/heap_area_nondia = 10000000000

ztta/roll_extension = 64000000000

ztta/roll_area = 20000000

rdisp/ROLL_MAXFS = 250000

rdisp/ROLL_SHM = 163840

rdisp/PG_MAXFS = 458752

rdisp/autoabaptime = 0

zcsa/system_language = E

dbs/ora/schema = SAPR3

# *** CHANGE for the shadow instance ***

rdisp/accept_remote_trace_level = 0

transport/during_upgrade = ON

rdisp/system_needs_spool = false

snc/enable = 0

rdisp/j2ee_start = 0

rdisp/start_icman = false

vmcj/enable = off

abap/package_check = off

rdisp/dynamic_wp_check = false

# Adaptions for shadow system 731

SAPSYSTEMNAME = R3U

SAPSYSTEM = 07

INSTANCE_NAME = DVEBMGS07

SAPGLOBALHOST = sapux1

SAPLOCALHOST = sapux1

SAPLOCALHOSTFULL = sapux1

DIR_INSTANCE = /r3d/mnt/R3U/start/SUM/abap$(DIR_SEP)R3U$(DIR_SEP)$(INSTANCE_NAME)

DIR_PROFILE = /r3d/mnt/R3U/start/SUM/abap$(DIR_SEP)R3U$(DIR_SEP)SYS$(DIR_SEP)profile

DIR_EXECUTABLE = /r3d/mnt/R3U/start/SUM/abap/exe

DIR_CT_RUN = /r3d/mnt/R3U/start/SUM/abap/exe

DIR_GLOBAL = /r3d/mnt/R3U/start/SUM/abap$(DIR_SEP)R3U$(DIR_SEP)SYS$(DIR_SEP)global

auth/shadow_upgrade = 1

Highlighted are the changes

Thanks

Rishi Abrol

[Former Member]

Hello

I had tried with this profile file, But shadow instance did not come up:

Last part og SAPup.ECO log file.

14.09.2013 04:52:36

StartWait

FAIL: process disp+work Dispatcher not running

SAPup> Process with PID 18548 terminated with status 2 at 20130914045236!

I have run sappfpar check. I addded file with result.

I did tried to use old profile file but the same problem The shadow will not come up.

The disp+work not runing on shadow instance.

Thanks

check_profile.txt.zip

[Former Member]

Hi,

Can you please try this.

em/initial_size_MB = 10000

em/max_size_MB = 15000

em/address_space_MB = 4096

ztta/roll_first = 1

ztta/roll_area = 3000000

ztta/roll_extension = 2000000000

abap/heap_area_dia = 10000000000

abap/heap_area_nondia = 10000000000

abap/heap_area_total = 16106127360

rdisp/ROLL_MAXFS = 150000

rdisp/ROLL_SHM = 163840

rdisp/PG_MAXFS = 32768

rdisp/PG_SHM = 106608

Thanks

Rishi Abrol

[Former Member]

Hi,

In which profile file the old one or the new one you gave me? The shadow will not start by old profile too.

I have tried to use new profile parameter on new one you gave me but still the same.

14.09.2013 06:49:48

StartWait

FAIL: process disp+work Dispatcher not running

SAPup> Process with PID 2200 terminated with status 2 at 20130914064948!

Thanks

Reza

[Former Member]

HI,

Have you cleared the ipc processes.

by giving the cleanipc XX remove

where XX is the shaodow instance no.

Thanks

Rishi Abrol

[Former Member]

Hi Rishi,

I will try one more time with this  cleanipc 07 remove

.

Thanks

[Former Member]

Yes.

And if need you can take the file that you attached me in this message earlier.

What is the message in the dev_w0 in the /sum/abap/R3U/DV*/work directory.

Thanks

Rishi Abrol

[Former Member]

Hi,

I did treid this:

sapux1:r3uadm 67> cleanipc 07 remove

Show/Cleanup SAP-IPC-Objects V2.3, 94/01/20
===========================================

Running SAP-Systems (Nr)...:

----------------------------------------------------------
---- Clear IPC-Objects of Sap-System  7 ------------------
----------------------------------------------------------

Number of IPC-Objects...........:    0
Number of removed IPC-Objects...:    0

Number of SAP_ES files found:.............:    0
Number of SAP_ES files removed:...........:    0

sapux1:r3uadm 68> SAPup startshd
Starting shadow system ...
Starting service ...

FATAL ERROR: Process /r3d/mnt/R3U/start/SUM/abap/exe/sapcontrol exited with 2, see '/r3d/mnt/R3U/start/SUM/abap/log/SAPup.ECO' for details
sapux1:r3uadm 69>

I had treid with old  one and the new one  profile you gave me . Shadow did not come up.

Thanks

[Former Member]

Hi,

please post the log in the work directory which i asked you earlier.

Is the actual system running.

Please also post the old and the new profile that you are using.

Thanks

Rishi Abrol

[Former Member]

HI

Here is this files.

Thanks

dev_wo.txt.zip

new_profile.txt.zip

old_profile.txt.zip

[Former Member]

Hi,

Please use this profile.

#.******************************************************************************************************************************

#.*                                                                                                                            *

#.*       Instance profile R3U_DVEBMGS07_SAPUX1                                                                                *

#.*                                                                                                                            *

#.*       Version                 = 000007                                                                                     *

#.*       Generated by user = DDIC                                                                                             *

#.*       Generated on = 12.09.2013 , 08:43:11                                                                                 *

#.*                                                                                                                            *

#.******************************************************************************************************************************

#parameter created                          by: DDIC         11.09.2013 21:37:59

abap/buffersize = 400000

#parameter created                          by: DDIC         11.09.2013 21:14:15

#em/initial_size_MB = 15000

#em/max_size_MB = 22500

#em/address_space_MB = 4096

#ztta/roll_first = 1

# Instance profile for shadow system 731

rdisp/mshost = sapux1

rdisp/wp_no_dia = 5

rdisp/wp_no_vb = 1

rdisp/wp_no_vb2 = 0

# Entries for configuring a stand-alone enqueue. Integrated enqueue is no longer supported for kernel 802 and higher.

#rdisp/wp_no_enq = 1

rdisp/wp_no_btc = 4

rdisp/wp_no_spo = 1

rdisp/max_wprun_time = 0

abap/apg_settings = off

#old_value: 2000000                                                                            changed: DDIC 12.09.2013 08:42:55

PHYS_MEMSIZE = 30%

zcsa/presentation_buffer_area = 4400000

zcsa/table_buffer_area = 80000000

zcsa/db_max_buftab = 10000

rtbb/buffer_length = 70000

rtbb/max_tables = 500

# *** CHANGE for the shadow instance ***

#ipc/shm_psize_10 = 40000000

ipc/shm_psize_10 = 128000000

# *** CHANGE for the shadow instance ***

#ipc/shm_psize_40 = 68000000

ipc/shm_psize_40 = 112000000

#abap/heap_area_dia = 10000000000

#abap/heap_area_total = 16106127360

#abap/heap_area_nondia = 10000000000

#ztta/roll_extension = 64000000000

#ztta/roll_area = 20000000

#rdisp/ROLL_MAXFS = 250000

#rdisp/ROLL_SHM = 163840

#rdisp/PG_MAXFS = 458752

rdisp/autoabaptime = 0

zcsa/system_language = E

dbs/ora/schema = SAPR3

# *** CHANGE for the shadow instance ***

rdisp/accept_remote_trace_level = 0

transport/during_upgrade = ON

rdisp/system_needs_spool = false

snc/enable = 0

rdisp/j2ee_start = 0

rdisp/start_icman = false

vmcj/enable = off

abap/package_check = off

rdisp/dynamic_wp_check = false

# Adaptions for shadow system 731

SAPSYSTEMNAME = R3U

SAPSYSTEM = 07

INSTANCE_NAME = DVEBMGS07

SAPGLOBALHOST = sapux1

SAPLOCALHOST = sapux1

SAPLOCALHOSTFULL = sapux1

DIR_INSTANCE = /r3d/mnt/R3U/start/SUM/abap$(DIR_SEP)R3U$(DIR_SEP)$(INSTANCE_NAME)

DIR_PROFILE = /r3d/mnt/R3U/start/SUM/abap$(DIR_SEP)R3U$(DIR_SEP)SYS$(DIR_SEP)profile

DIR_EXECUTABLE = /r3d/mnt/R3U/start/SUM/abap/exe

DIR_CT_RUN = /r3d/mnt/R3U/start/SUM/abap/exe

DIR_GLOBAL = /r3d/mnt/R3U/start/SUM/abap$(DIR_SEP)R3U$(DIR_SEP)SYS$(DIR_SEP)global

auth/shadow_upgrade = 1

How did you make the changes in the profile.

When you do below commad  you should not see any ^M in end of the line.

more R3U_DVEBMGS07_SAPUX1

Always use vi command if you are changing the profile if you are changing at os level.

Thanks

Rishi Abrol

[Former Member]

hi ,

give the screen shot of how much free memory you have on the server by logging on the actual system on ST06 transaction.

Thanks

Rishi Abrol