LSMW

[Former Member]

I was stuck with one problem. I created material by using direct input method in LSMW. When we see this material in MM03, it is available for display. Here the problem is in MM03 only basic data 1 and basic data 2 are available. I am trying to trace out for other views, but not possible. What is wrong in that... data reading, data conversion is fine for other views also. However, the data is not transferring to other views, where I am getting problems, I could not find. Please help me out…

Thanks and regards,

Partha K Sarathi

[Former Member]

hi partha,

are you passing all the view information . i mean

are you passing 'X' to all the views in <b>BMM00</b> structure.

there are some fields , you need to mark them as 'X'

then only you can see their info..

XEIA1
XEIB1
XEID1
XEID2
XEIE1
XEIE2
XEIK1
XEIL1
XEIP1
XEIS1
XEIV1
XEIV2
XEIV3
XEIV4....

regards

vijay

[Former Member]

Hi,

Check the following , it may help ..

1. Authorization for diplay view

2. Data in the tables on which the view is based.

regards,

Sumeet Mishra

Kindly provide reward points if this helps.

[Former Member]

hi partha,

are you passing all the view information . i mean

are you passing 'X' to all the views in <b>BMM00</b> structure.

there are some fields , you need to mark them as 'X'

then only you can see their info..

XEIA1
XEIB1
XEID1
XEID2
XEIE1
XEIE2
XEIK1
XEIL1
XEIP1
XEIS1
XEIV1
XEIV2
XEIV3
XEIV4....

regards

vijay

[Former Member]

Hi BABU,

Thanks For Reply. I tried with indicators also. But still iam getting same error and data is not transfering and not able to see other views in MM02 AND MM03.

tHANKS AND REGARDS

pARTHA SARATHI.

[Former Member]

Hi,

for testing you can do in two ways, one create the material using MM01 and go to mm02/mm03 and check with the same data what ever you are passing to LSMW. then you may get some hints(what you missed) or you can use BAPI.

for BAPI code just use the below code..

REPORT Z_NEW_PROGRAM .


**********************************************************************
*                STRUCTURE  DECLARATIONS                             *
**********************************************************************

TABLES: BAPIMATHEAD,  "Headerdata
        BAPI_MARA,    "Clientdata
        BAPI_MARAX,   "Clientdatax
        BAPI_MARC,    "Plantdata
        BAPI_MARCX,   "Plantdatax
        BAPI_MAKT,    "Material description
        BAPIRET2.     "Return messages

DATA:V_FILE TYPE STRING.


DATA:
  BEGIN OF LSMW_MATERIAL_MASTER,
    MATNR(018) TYPE C,  "Material number
    MTART(004) TYPE C,  "Material type
    MBRSH(001) TYPE C,  "Industry sector
    WERKS(004) TYPE C,  "Plant
    MAKTX(040) TYPE C,  "Material description
    DISMM(002) TYPE C,  "Extra Field Added In the Program as itsrequired
    MEINS(003) TYPE C,  "Base unit of measure
    MATKL(009) TYPE C,  "Material group
    SPART(002) TYPE C,  "Division
    LABOR(003) TYPE C,  "Lab/office
    PRDHA(018) TYPE C,  "Product hierarchy
    MSTAE(002) TYPE C,  "X-plant matl status
    MTPOS_MARA(004) TYPE C,  "Gen item cat group
    BRGEW(017) TYPE C,  "Gross weight
    GEWEI(003) TYPE C,  "Weight unit
    NTGEW(017) TYPE C,  "Net weight
    GROES(032) TYPE C,  "Size/Dimensions
    MAGRV(004) TYPE C,  "Matl grp pack matls
    BISMT(018) TYPE C,  "Old material number
    WRKST(048) TYPE C,  "Basic material
    PROFL(003) TYPE C,  "DG indicator profile
    KZUMW(001) TYPE C,  "Environmentally rlvt
    BSTME(003) TYPE C,  "Order unit
    VABME(001) TYPE C,
    EKGRP(003) TYPE C,  "Purchasing group
    XCHPF(001) TYPE C,  "Batch management
    EKWSL(004) TYPE C,  "Purchasing key value
    WEBAZ(003) TYPE C,  "GR processing time
    MFRPN(040) TYPE C,  "Manufacturer part number
    MFRNR(010) TYPE C,  "Manufacturer number
    VPRSV(001) TYPE C,  "Price control indicator
    STPRS(015) TYPE C,  "Standard price
    BWPRH(014) TYPE C,  "Commercial price1
    BKLAS(004) TYPE C,  "Valuation class
  END OF LSMW_MATERIAL_MASTER.


**********************************************************************
*                INTERNAL TABLE DECLARATIONS                         *
**********************************************************************

*to store the input data
DATA:
  BEGIN OF it_matmaster OCCURS 0.
        INCLUDE STRUCTURE LSMW_MATERIAL_MASTER.

DATA:
  END OF it_matmaster.

*for material description
DATA:BEGIN OF IT_MATERIALDESC OCCURS 0.
     INCLUDE STRUCTURE BAPI_MAKT .
DATA:END OF IT_MATERIALDESC.

*to return messages
DATA:BEGIN OF IT_RETURN OCCURS 0.
     INCLUDE STRUCTURE BAPIRET2.
DATA:END OF IT_RETURN.

************************************************************************
*  SELECTION SCREEN
************************************************************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-002.

PARAMETERS:P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1 .

************************************************************************
* AT SELECTION SCREEN
************************************************************************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
  CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME  = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE'
    IMPORTING
      FILE_NAME     = P_FILE.



**********************************************************************
*                TO UPLOAD THE DATA                                  *
**********************************************************************

START-OF-SELECTION.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
  EXPORTING
    filename                      = V_FILE
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
*   HEADER_LENGTH                 = 0
*   READ_BY_LINE                  = 'X'
*   DAT_MODE                      = ' '
* IMPORTING
*   FILELENGTH                    =
*   HEADER                        =
  tables
    data_tab                      =  IT_MATMASTER
 EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
          .
IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

**********************************************************************
*                DATA POPULATIONS                                    *
**********************************************************************


LOOP AT  IT_MATMASTER.
  BAPIMATHEAD-MATERIAL = IT_MATMASTER-MATNR.
  BAPIMATHEAD-IND_SECTOR = IT_MATMASTER-Mbrsh.
  BAPIMATHEAD-MATL_TYPE = IT_MATMASTER-Mtart.
  BAPIMATHEAD-BASIC_VIEW = 'X'.
  BAPIMATHEAD-PURCHASE_VIEW = 'X'.
  BAPIMATHEAD-ACCOUNT_VIEW = 'X'.
  BAPI_MARA-MATL_GROUP = IT_MATMASTER-MATKL.
  BAPI_MARA-OLD_MAT_NO = IT_MATMASTER-BISMT.
  BAPI_MARA-BASE_UOM = IT_MATMASTER-MEINS.
  BAPI_MARA-BASIC_MATL = IT_MATMASTER-WRKST.
  BAPI_MARA-MFR_NO = IT_MATMASTER-MFRNR.
  BAPI_MARAX-MATL_GROUP = 'X'.
  BAPI_MARAX-OLD_MAT_NO = 'X'.
  BAPI_MARAX-BASE_UOM = 'X'.
  BAPI_MARAX-BASIC_MATL = 'X'.
  BAPI_MARAX-MFR_NO = 'X'.
  BAPI_MARC-PLANT = IT_MATMASTER-WERKS.
  BAPI_MARC-PUR_GROUP = IT_MATMASTER-EKGRP.
  BAPI_MARCX-PLANT = IT_MATMASTER-WERKS.
  BAPI_MARCX-PUR_GROUP = 'X'.
  IT_MATERIALDESC-LANGU = 'EN'.
  IT_MATERIALDESC-MATL_DESC = IT_MATMASTER-MAKTX.
  append IT_materialdesc.
  CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
      headdata                   = BAPIMATHEAD
      CLIENTDATA                 = BAPI_MARA
      CLIENTDATAX                = BAPI_MARAx
     PLANTDATA                  = BAPI_MARc
     PLANTDATAX                 = BAPI_MARcx
*     FORECASTPARAMETERS         =
*     FORECASTPARAMETERSX        =
*     PLANNINGDATA               =
*     PLANNINGDATAX              =
*     STORAGELOCATIONDATA        =
*     STORAGELOCATIONDATAX       =
*     VALUATIONDATA              =
*     VALUATIONDATAX             =
*     WAREHOUSENUMBERDATA        =
*     WAREHOUSENUMBERDATAX       =
*     SALESDATA                  =
*     SALESDATAX                 =
*     STORAGETYPEDATA            =
*     STORAGETYPEDATAX           =
*     FLAG_ONLINE                = ' '
*     FLAG_CAD_CALL              = ' '
   IMPORTING
     RETURN                     = IT_RETURN
   TABLES
     MATERIALDESCRIPTION        = IT_MATERIALDESC
*     UNITSOFMEASURE             =
*     UNITSOFMEASUREX            =
*     INTERNATIONALARTNOS        =
*     MATERIALLONGTEXT           =
*     TAXCLASSIFICATIONS         =
*     RETURNMESSAGES             =
*     PRTDATA                    =
*     PRTDATAX                   =
*     EXTENSIONIN                =
*     EXTENSIONINX               =
            .

 WRITE:/    IT_RETURN-TYPE,
        2   IT_RETURN-ID,
        22  IT_RETURN-NUMBER,
        25  IT_RETURN-MESSAGE.
*            IT_RETURN-LOG_NO,
*            IT_RETURN-LOG_MSG_NO,
*            IT_RETURN-MESSAGE_V1,
*            IT_RETURN-MESSAGE_V2,
*            IT_RETURN-MESSAGE_V3,
*            IT_RETURN-MESSAGE_V4,
*            IT_RETURN-PARAMETER,
*            IT_RETURN-ROW,
*            IT_RETURN-FIELD,
*            IT_RETURN-SYSTEM.

ENDLOOP.

Regards

vijay

[Former Member]

Hi Babu,

Your suggestion is helpful. But i think that much of complexity is not required , and also in FD they mentioned no hard core( much). But anyway thanks a lot

thanks and regards

Partha

[abdul_hakim]

Hi,

Have you done the field mapping for those views?

Please check it..

Abdul