Get value without press enter in selection screen

[Former Member]

Dear All,

Any ideas how we can get the selection screen field value in report without press enter ?

Example : My selection have 2 fields Field A and Field B. When the user select the Field A value from search help, without press the enter i can get the value from field A and assign the value generate the data from Field B seach help.

THanks

[Former Member]

Hi

Use DYNP_VALUES_READ to get the values entered in firlst field

Check the below thread

http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm

"You can use this even for Selection Screen PARAMETERS now
parameters : P_carrid type sflight-carrid,
 connid type sflight-connid.

At selection-screen on value-request for p_connid
 
  DATA : BEGIN OF f4_tab OCCURS 0,
         carrid TYPE sflight-carrid,
         connid TYPE sflight-connid,
    END OF f4_tab.
   CLEAR lin.
 
 
  DATA : dynpread TYPE TABLE OF dynpread WITH HEADER LINE. 
  REFRESH dynpread.
  CLEAR dynpread.
  dynpread-fieldname = 'P_CARRID'.

  APPEND dynpread.
  CLEAR dynpread.
 
  CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname                               = sy-repid
      dynumb                               = sy-dynnr
    TABLES
      dynpfields                           = dynpread
   EXCEPTIONS
     invalid_abapworkarea                 = 1
     invalid_dynprofield                  = 2
     invalid_dynproname                   = 3
     invalid_dynpronummer                 = 4
     invalid_request                      = 5
     no_fielddescription                  = 6
     invalid_parameter                    = 7
     undefind_error                       = 8
     double_conversion                    = 9
     stepl_not_found                      = 10
     OTHERS                               = 11
            .
  IF sy-subrc IS INITIAL.
    READ TABLE dynpread WITH KEY fieldname = 'P_CARRID'.
    IF sy-subrc IS INITIAL.
      SELECT carrid connid FROM sflight
            INTO TABLE f4_tab
             WHERE carrid = dynpread-fieldvalue.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield               = 'CONNID'
         dynpprog               = sy-repid
         dynpnr                 = sy-dynnr
         dynprofield            = 'P_CONNID'
         value_org              = 'S'
        TABLES
          value_tab              = f4_tab
    ENDIF.
  ENDIF.
ENDMODULE.                 " f4_get  INPUT


Now you can use it for Selection Screen Also

You can omit the part whihc you dont want in the above FM

Cheerz

Ram

[Former Member]

Hi

Use DYNP_VALUES_READ to get the values entered in firlst field

Check the below thread

http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm

"You can use this even for Selection Screen PARAMETERS now
parameters : P_carrid type sflight-carrid,
 connid type sflight-connid.

At selection-screen on value-request for p_connid
 
  DATA : BEGIN OF f4_tab OCCURS 0,
         carrid TYPE sflight-carrid,
         connid TYPE sflight-connid,
    END OF f4_tab.
   CLEAR lin.
 
 
  DATA : dynpread TYPE TABLE OF dynpread WITH HEADER LINE. 
  REFRESH dynpread.
  CLEAR dynpread.
  dynpread-fieldname = 'P_CARRID'.

  APPEND dynpread.
  CLEAR dynpread.
 
  CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname                               = sy-repid
      dynumb                               = sy-dynnr
    TABLES
      dynpfields                           = dynpread
   EXCEPTIONS
     invalid_abapworkarea                 = 1
     invalid_dynprofield                  = 2
     invalid_dynproname                   = 3
     invalid_dynpronummer                 = 4
     invalid_request                      = 5
     no_fielddescription                  = 6
     invalid_parameter                    = 7
     undefind_error                       = 8
     double_conversion                    = 9
     stepl_not_found                      = 10
     OTHERS                               = 11
            .
  IF sy-subrc IS INITIAL.
    READ TABLE dynpread WITH KEY fieldname = 'P_CARRID'.
    IF sy-subrc IS INITIAL.
      SELECT carrid connid FROM sflight
            INTO TABLE f4_tab
             WHERE carrid = dynpread-fieldvalue.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield               = 'CONNID'
         dynpprog               = sy-repid
         dynpnr                 = sy-dynnr
         dynprofield            = 'P_CONNID'
         value_org              = 'S'
        TABLES
          value_tab              = f4_tab
    ENDIF.
  ENDIF.
ENDMODULE.                 " f4_get  INPUT


Now you can use it for Selection Screen Also

You can omit the part whihc you dont want in the above FM

Cheerz

Ram

[former_member695573]

Thankyou it worked for me.

[Former Member]

Dear Ram,

this function apply in report selection screen ? i tried this b4 but i can read the value from the field.

Any ideas ?

THanks,

[Former Member]

Sorry ..... for wrong spealling

Dear Ram,

this function apply in report selection screen ? i tried this b4 but i CANNOT read the value from the field.

Any ideas ?

THanks,

[Former Member]

Hi,

You must create a custom search help. This new search help must contain a reference to table in dictionary in which your fields are linked one to each other with this search help.

Let's say you have a transparent table ZTABLE:

ZTABLE-FIELD1 -> Search help ZH_MY_HELP

ZTABLE-FIELD2 -> Search help ZH_MY_HELP

In search help ZH_MY_HELP, you defined this ZTABLE as your reference table, and FIELD1 and FIELD2 are explicitly mentioned as fields for search.

Doing this, when you define in your selection screen:

PARAMETERS: param1 TYPE ZTABLE-FIELD1,

param2 TYPE ZTABLE-FIELD2.

Values from param2 will depend of values from param1, when pressing F4. This is what I think your "read value from selection screen, without pressing enter" problem is.

Best regards!

Julio Almeida

[Former Member]

This message was moderated.

[former_member196331]

Hi,

Try below code.

TABLES: MARA.

types: begin of ty,

          matnr type matnr,

         werks type werks_d,

        end of ty.

data: it2 type standard table of dselc,

       wa2 type dselc.

data: it type standard table of ty,

       wa_return type ddshretval,

       i_return type standard table of ddshretval,

       repid type sy-repid,

       dynnr type sy-dynnr.

parameters:

          p_matnr   type mara-matnr,

          p_werks    type marc-werks.

SELECT-OPTIONS: S_BUKRS FOR MARA-MATNR.

at selection-screen output.

**  loop at screen.

**    if screen-name = 'P_WERKS'.

**      screen-input = '0'.

**      screen-DISPLAY_3D = 'X'.

**      modify screen.

**    endif.

**  endloop.

at selection-screen on value-request for p_matnr.

   repid = sy-repid.

   dynnr = sy-dynnr.

   select matnr werks

               from marc up to 20 rows

               into table it.

   check sy-subrc = 0.

   wa2-fldname = 'F0001'.

   wa2-dyfldname = 'P_MATNR'.

   append wa2 to it2.

   wa2-fldname = 'F0002'.

   wa2-dyfldname = 'P_WERKS'.

   append wa2 to it2.

   call function 'F4IF_INT_TABLE_VALUE_REQUEST'

        exporting

             retfield        = 'WERKS'

             dynpprog        = repid

             dynpnr          = dynnr

             dynprofield     = 'P_WERKS'

             value_org       = 'S'

             display         = 'F'

        tables

             value_tab       = it

             dynpfld_mapping = it2

        exceptions

             parameter_error = 1

             no_values_found = 2

             others          = 3.