alv trees

[Former Member]

hi all,

i had an requirement to do an alv report with tree nodes without using oops concept if any examples are there please let me know i had searched in bcal* but all the reports are using oops concept please help me.

regards,

karthik

[Former Member]

*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

• §1a. Define reference variables

data: g_alv_tree type ref to cl_gui_alv_tree,

g_custom_container type ref to cl_gui_custom_container.

data: gt_sflight type sflight occurs 0, u201COutput-Table

ok_code like sy-ucomm,

save_ok like sy-ucomm, u201COK-Code

g_max type i value 255.

end-of-selection.

call screen 100.

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Module PBO OUTPUT

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• process before output

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

module pbo output.

set pf-status u2018MAIN100u2032.

set titlebar u2018MAINTITLEu2019.

if g_alv_tree is initial.

perform init_tree.

call method cl_gui_cfw=>flush

exceptions

cntl_system_error = 1

cntl_error = 2.

if sy-subrc ne 0.

call function u2018POPUP_TO_INFORMu2019

exporting

titel = u2018Automation Queue failureu2019(801)

txt1 = u2018Internal error:u2019(802)

txt2 = u2018A method in the automation queueu2019(803)

txt3 = u2019caused a failure.u2019(804).

endif.

endif.

endmodule. u201C PBO OUTPUT

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Module PAI INPUT

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• process after input

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

module pai input.

save_ok = ok_code.

clear ok_code.

case save_ok.

when u2018EXITu2019 or u2018BACKu2019 or u2018CANCu2019.

perform exit_program.

when others.

• §6. Call dispatch to process toolbar functions

call method cl_gui_cfw=>dispatch.

endcase.

call method cl_gui_cfw=>flush.

endmodule. u201C PAI INPUT

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form init_tree

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

• u2013> p1 text

• <u2013 p2 text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

form init_tree.

• §1b. Create ALV Tree Control and corresponding Container.

• create container for alv-tree

data: l_tree_container_name(30) type c.

l_tree_container_name = u2018CCONTAINER1u2032.

create object g_custom_container

exporting

container_name = l_tree_container_name

exceptions

cntl_error = 1

cntl_system_error = 2

create_error = 3

lifetime_error = 4

lifetime_dynpro_dynpro_link = 5.

if sy-subrc <> 0.

message x208(00) with u2018ERRORu2019(100).

endif.

• create tree control

create object g_alv_tree

exporting

parent = g_custom_container

node_selection_mode = cl_gui_column_tree=>node_sel_mode_single

item_selection = u2018Xu2019

no_html_header = u2018Xu2019

no_toolbar = u201D

exceptions

cntl_error = 1

cntl_system_error = 2

create_error = 3

lifetime_error = 4

illegal_node_selection_mode = 5

failed = 6

illegal_column_name = 7.

if sy-subrc <> 0.

message x208(00) with u2018ERRORu2019. u201C#EC NOTEXT

endif.

• §2. Create Hierarchy-header

• The simple ALV Tree uses the text of the fields which were used

• for sorting to define this header. When you use

• the u2019normalu2019 ALV Tree the hierarchy is build up freely

• by the programmer this is not possible, so he has to define it

• himself.

data l_hierarchy_header type treev_hhdr.

perform build_hierarchy_header changing l_hierarchy_header.

• §3. Create empty Tree Control

• IMPORTANT: Table u2019gt_sflightu2019 must be empty. Do not change this table

• (even after this method call). You can change data of your table

• by calling methods of CL_GUI_ALV_TREE.

• Furthermore, the output table u2019gt_outtabu2019 must be global and can

• only be used for one ALV Tree Control.

call method g_alv_tree->set_table_for_first_display

exporting

i_structure_name = u2018SFLIGHTu2019

is_hierarchy_header = l_hierarchy_header

changing

it_outtab = gt_sflight. u201Ctable must be empty !

• §4. Create hierarchy (nodes and leaves)

perform create_hierarchy.

• §5. Send data to frontend.

call method g_alv_tree->frontend_update.

• wait for automatic flush at end of pbo

endform. u201C init_tree

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form build_hierarchy_header

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• build hierarchy-header-information

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

• u2013>P_L_HIERARCHY_HEADER strucxture for hierarchy-header

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

form build_hierarchy_header changing

p_hierarchy_header type treev_hhdr.

p_hierarchy_header-heading = u2018Month/Carrier/Dateu2019(300).

p_hierarchy_header-tooltip = u2018Flights in a monthu2019(400).

p_hierarchy_header-width = 30.

p_hierarchy_header-width_pix = u2018 u2019.

endform. u201C build_hierarchy_header

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form exit_program

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• free object and leave program

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

form exit_program.

call method g_custom_container->free.

leave program.

endform. u201C exit_program

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form create_hierarchy

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

• u2013> p1 text

• <u2013 p2 text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

form create_hierarchy.

data: ls_sflight type sflight,

lt_sflight type sflight occurs 0,

l_yyyymm(6) type c, u201Cyear and month of sflight-fldate

l_yyyymm_last(6) type c,

l_carrid like sflight-carrid,

l_carrid_last like sflight-carrid.

data: l_month_key type lvc_nkey,

l_carrid_key type lvc_nkey,

l_last_key type lvc_nkey.

• §4a. Select data

select * from sflight into table lt_sflight up to g_max rows.

• §4b. Sort output table according to your conceived hierarchy

• We sort in this order:

• year and month (top level nodes, yyyymm of DATS)

• carrier id (next level)

• day of month (leaves, dd of DATS)

sort lt_sflight by fldate0(6) carrid fldate6(2).

• Note: The top level nodes do not correspond to a field of the

• output table. Instead we use data of the table to invent another

• hierarchy level above the levels that can be build by sorting.

• §4c. Add data to tree

loop at lt_sflight into ls_sflight.

• Prerequesite: The table is sorted.

• You add a node everytime the values of a sorted field changes.

• Finally, the complete line is added as a leaf below the last

• node.

l_yyyymm = ls_sflight-fldate+0(6).

l_carrid = ls_sflight-carrid.

• Top level nodes:

if l_yyyymm <> l_yyyymm_last. u201Con change of l_yyyymm

l_yyyymm_last = l_yyyymm.

*Providing no key means that the node is added on top level:

perform add_month using l_yyyymm

u201D

changing l_month_key.

• The month changed, thus, there is no predecessor carrier

clear l_carrid_last.

endif.

• Carrier nodes:

• (always inserted as child of the last month

• which is identified by u2019l_month_keyu2019)

if l_carrid <> l_carrid_last. u201Con change of l_carrid

l_carrid_last = l_carrid.

perform add_carrid_line using ls_sflight

l_month_key

changing l_carrid_key.

endif.

• Leaf:

• (always inserted as child of the last carrier

• which is identified by u2019l_carrid_keyu2019)

perform add_complete_line using ls_sflight

l_carrid_key

changing l_last_key.

endloop.

endform. u201C create_hierarchy

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form add_month

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

form add_month using p_yyyymm type c

p_relat_key type lvc_nkey

changing p_node_key type lvc_nkey.

data: l_node_text type lvc_value,

ls_sflight type sflight,

l_month(15) type c. u201Coutput string for month

• get month name for node text

perform get_month using p_yyyymm

changing l_month.

l_node_text = l_month.

• add node:

• ALV Tree firstly inserts this node as a leaf if you do not provide

• IS_NODE_LAYOUT with field ISFOLDER set. In form u2019add_carrid_lineu2019

• the leaf gets a child and thus ALV converts it to a folder

• automatically.

*

call method g_alv_tree->add_node

exporting

i_relat_node_key = p_relat_key

i_relationship = cl_gui_column_tree=>relat_last_child

i_node_text = l_node_text

is_outtab_line = ls_sflight

importing

e_new_node_key = p_node_key.

endform. u201C add_month

*u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2013

form add_carrid_line using ps_sflight type sflight

p_relat_key type lvc_nkey

changing p_node_key type lvc_nkey.

data: l_node_text type lvc_value,

ls_sflight type sflight.

• add node

• ALV Tree firstly inserts this node as a leaf if you do not provide

• IS_NODE_LAYOUT with field ISFOLDER set. In form u2019add_carrid_lineu2019

• the leaf gets a child and thus ALV converts it to a folder

• automatically.

*

l_node_text = ps_sflight-carrid.

call method g_alv_tree->add_node

exporting

i_relat_node_key = p_relat_key

i_relationship = cl_gui_column_tree=>relat_last_child

i_node_text = l_node_text

is_outtab_line = ls_sflight

importing

e_new_node_key = p_node_key.

endform. u201C add_carrid_line

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form add_complete_line

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

form add_complete_line using ps_sflight type sflight

p_relat_key type lvc_nkey

changing p_node_key type lvc_nkey.

data: l_node_text type lvc_value.

write ps_sflight-fldate to l_node_text mm/dd/yyyy.

• add leaf:

• ALV Tree firstly inserts this node as a leaf if you do not provide

• IS_NODE_LAYOUT with field ISFOLDER set.

• Since these nodes will never get children they stay leaves

• (as intended).

*

call method g_alv_tree->add_node

exporting

i_relat_node_key = p_relat_key

i_relationship = cl_gui_column_tree=>relat_last_child

is_outtab_line = ps_sflight

i_node_text = l_node_text

importing

e_new_node_key = p_node_key.

endform. u201C add_complete_line

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form GET_MONTH

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

• u2013>P_P_YYYYMM text

• <u2013P_L_MONTH text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

form get_month using p_yyyymm

changing p_month.

• Returns the name of month according to the digits in p_yyyymm

data: l_monthdigits(2) type c.

l_monthdigits = p_yyyymm+4(2).

case l_monthdigits.

when u201801u2032.

p_month = u2018Januaryu2019(701).

when u201802u2032.

p_month = u2018Februaryu2019(702).

when u201803u2032.

p_month = u2018Marchu2019(703).

when u201804u2032.

p_month = u2018Aprilu2019(704).

when u201805u2032.

p_month = u2018Mayu2019(705).

when u201806u2032.

p_month = u2018Juneu2019(706).

when u201807u2032.

p_month = u2018Julyu2019(707).

when u201808u2032.

p_month = u2018Augustu2019(708).

when u201809u2032.

p_month = u2018Septemberu2019(709).

when u201810u2032.

p_month = u2018Octoberu2019(710).

when u201811u2032.

p_month = u2018Novemberu2019(711).

when u201812u2032.

p_month = u2018Decemberu2019(712).

endcase.

concatenate p_yyyymm+0(4) u2018->u2019 p_month into p_month.

endform. u201C GET_MONTH

[Sandeep_Panghal]

whats the problem in using OO concepts ??

Really strange to hear!!!

[Former Member]

*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

• §1a. Define reference variables

data: g_alv_tree type ref to cl_gui_alv_tree,

g_custom_container type ref to cl_gui_custom_container.

data: gt_sflight type sflight occurs 0, u201COutput-Table

ok_code like sy-ucomm,

save_ok like sy-ucomm, u201COK-Code

g_max type i value 255.

end-of-selection.

call screen 100.

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Module PBO OUTPUT

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• process before output

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

module pbo output.

set pf-status u2018MAIN100u2032.

set titlebar u2018MAINTITLEu2019.

if g_alv_tree is initial.

perform init_tree.

call method cl_gui_cfw=>flush

exceptions

cntl_system_error = 1

cntl_error = 2.

if sy-subrc ne 0.

call function u2018POPUP_TO_INFORMu2019

exporting

titel = u2018Automation Queue failureu2019(801)

txt1 = u2018Internal error:u2019(802)

txt2 = u2018A method in the automation queueu2019(803)

txt3 = u2019caused a failure.u2019(804).

endif.

endif.

endmodule. u201C PBO OUTPUT

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Module PAI INPUT

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• process after input

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

module pai input.

save_ok = ok_code.

clear ok_code.

case save_ok.

when u2018EXITu2019 or u2018BACKu2019 or u2018CANCu2019.

perform exit_program.

when others.

• §6. Call dispatch to process toolbar functions

call method cl_gui_cfw=>dispatch.

endcase.

call method cl_gui_cfw=>flush.

endmodule. u201C PAI INPUT

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form init_tree

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

• u2013> p1 text

• <u2013 p2 text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

form init_tree.

• §1b. Create ALV Tree Control and corresponding Container.

• create container for alv-tree

data: l_tree_container_name(30) type c.

l_tree_container_name = u2018CCONTAINER1u2032.

create object g_custom_container

exporting

container_name = l_tree_container_name

exceptions

cntl_error = 1

cntl_system_error = 2

create_error = 3

lifetime_error = 4

lifetime_dynpro_dynpro_link = 5.

if sy-subrc <> 0.

message x208(00) with u2018ERRORu2019(100).

endif.

• create tree control

create object g_alv_tree

exporting

parent = g_custom_container

node_selection_mode = cl_gui_column_tree=>node_sel_mode_single

item_selection = u2018Xu2019

no_html_header = u2018Xu2019

no_toolbar = u201D

exceptions

cntl_error = 1

cntl_system_error = 2

create_error = 3

lifetime_error = 4

illegal_node_selection_mode = 5

failed = 6

illegal_column_name = 7.

if sy-subrc <> 0.

message x208(00) with u2018ERRORu2019. u201C#EC NOTEXT

endif.

• §2. Create Hierarchy-header

• The simple ALV Tree uses the text of the fields which were used

• for sorting to define this header. When you use

• the u2019normalu2019 ALV Tree the hierarchy is build up freely

• by the programmer this is not possible, so he has to define it

• himself.

data l_hierarchy_header type treev_hhdr.

perform build_hierarchy_header changing l_hierarchy_header.

• §3. Create empty Tree Control

• IMPORTANT: Table u2019gt_sflightu2019 must be empty. Do not change this table

• (even after this method call). You can change data of your table

• by calling methods of CL_GUI_ALV_TREE.

• Furthermore, the output table u2019gt_outtabu2019 must be global and can

• only be used for one ALV Tree Control.

call method g_alv_tree->set_table_for_first_display

exporting

i_structure_name = u2018SFLIGHTu2019

is_hierarchy_header = l_hierarchy_header

changing

it_outtab = gt_sflight. u201Ctable must be empty !

• §4. Create hierarchy (nodes and leaves)

perform create_hierarchy.

• §5. Send data to frontend.

call method g_alv_tree->frontend_update.

• wait for automatic flush at end of pbo

endform. u201C init_tree

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form build_hierarchy_header

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• build hierarchy-header-information

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

• u2013>P_L_HIERARCHY_HEADER strucxture for hierarchy-header

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

form build_hierarchy_header changing

p_hierarchy_header type treev_hhdr.

p_hierarchy_header-heading = u2018Month/Carrier/Dateu2019(300).

p_hierarchy_header-tooltip = u2018Flights in a monthu2019(400).

p_hierarchy_header-width = 30.

p_hierarchy_header-width_pix = u2018 u2019.

endform. u201C build_hierarchy_header

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form exit_program

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• free object and leave program

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

form exit_program.

call method g_custom_container->free.

leave program.

endform. u201C exit_program

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form create_hierarchy

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

• u2013> p1 text

• <u2013 p2 text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

form create_hierarchy.

data: ls_sflight type sflight,

lt_sflight type sflight occurs 0,

l_yyyymm(6) type c, u201Cyear and month of sflight-fldate

l_yyyymm_last(6) type c,

l_carrid like sflight-carrid,

l_carrid_last like sflight-carrid.

data: l_month_key type lvc_nkey,

l_carrid_key type lvc_nkey,

l_last_key type lvc_nkey.

• §4a. Select data

select * from sflight into table lt_sflight up to g_max rows.

• §4b. Sort output table according to your conceived hierarchy

• We sort in this order:

• year and month (top level nodes, yyyymm of DATS)

• carrier id (next level)

• day of month (leaves, dd of DATS)

sort lt_sflight by fldate0(6) carrid fldate6(2).

• Note: The top level nodes do not correspond to a field of the

• output table. Instead we use data of the table to invent another

• hierarchy level above the levels that can be build by sorting.

• §4c. Add data to tree

loop at lt_sflight into ls_sflight.

• Prerequesite: The table is sorted.

• You add a node everytime the values of a sorted field changes.

• Finally, the complete line is added as a leaf below the last

• node.

l_yyyymm = ls_sflight-fldate+0(6).

l_carrid = ls_sflight-carrid.

• Top level nodes:

if l_yyyymm <> l_yyyymm_last. u201Con change of l_yyyymm

l_yyyymm_last = l_yyyymm.

*Providing no key means that the node is added on top level:

perform add_month using l_yyyymm

u201D

changing l_month_key.

• The month changed, thus, there is no predecessor carrier

clear l_carrid_last.

endif.

• Carrier nodes:

• (always inserted as child of the last month

• which is identified by u2019l_month_keyu2019)

if l_carrid <> l_carrid_last. u201Con change of l_carrid

l_carrid_last = l_carrid.

perform add_carrid_line using ls_sflight

l_month_key

changing l_carrid_key.

endif.

• Leaf:

• (always inserted as child of the last carrier

• which is identified by u2019l_carrid_keyu2019)

perform add_complete_line using ls_sflight

l_carrid_key

changing l_last_key.

endloop.

endform. u201C create_hierarchy

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form add_month

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

form add_month using p_yyyymm type c

p_relat_key type lvc_nkey

changing p_node_key type lvc_nkey.

data: l_node_text type lvc_value,

ls_sflight type sflight,

l_month(15) type c. u201Coutput string for month

• get month name for node text

perform get_month using p_yyyymm

changing l_month.

l_node_text = l_month.

• add node:

• ALV Tree firstly inserts this node as a leaf if you do not provide

• IS_NODE_LAYOUT with field ISFOLDER set. In form u2019add_carrid_lineu2019

• the leaf gets a child and thus ALV converts it to a folder

• automatically.

*

call method g_alv_tree->add_node

exporting

i_relat_node_key = p_relat_key

i_relationship = cl_gui_column_tree=>relat_last_child

i_node_text = l_node_text

is_outtab_line = ls_sflight

importing

e_new_node_key = p_node_key.

endform. u201C add_month

*u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2013

form add_carrid_line using ps_sflight type sflight

p_relat_key type lvc_nkey

changing p_node_key type lvc_nkey.

data: l_node_text type lvc_value,

ls_sflight type sflight.

• add node

• ALV Tree firstly inserts this node as a leaf if you do not provide

• IS_NODE_LAYOUT with field ISFOLDER set. In form u2019add_carrid_lineu2019

• the leaf gets a child and thus ALV converts it to a folder

• automatically.

*

l_node_text = ps_sflight-carrid.

call method g_alv_tree->add_node

exporting

i_relat_node_key = p_relat_key

i_relationship = cl_gui_column_tree=>relat_last_child

i_node_text = l_node_text

is_outtab_line = ls_sflight

importing

e_new_node_key = p_node_key.

endform. u201C add_carrid_line

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form add_complete_line

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

form add_complete_line using ps_sflight type sflight

p_relat_key type lvc_nkey

changing p_node_key type lvc_nkey.

data: l_node_text type lvc_value.

write ps_sflight-fldate to l_node_text mm/dd/yyyy.

• add leaf:

• ALV Tree firstly inserts this node as a leaf if you do not provide

• IS_NODE_LAYOUT with field ISFOLDER set.

• Since these nodes will never get children they stay leaves

• (as intended).

*

call method g_alv_tree->add_node

exporting

i_relat_node_key = p_relat_key

i_relationship = cl_gui_column_tree=>relat_last_child

is_outtab_line = ps_sflight

i_node_text = l_node_text

importing

e_new_node_key = p_node_key.

endform. u201C add_complete_line

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

*& Form GET_MONTH

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014

• text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

• u2013>P_P_YYYYMM text

• <u2013P_L_MONTH text

u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-

form get_month using p_yyyymm

changing p_month.

• Returns the name of month according to the digits in p_yyyymm

data: l_monthdigits(2) type c.

l_monthdigits = p_yyyymm+4(2).

case l_monthdigits.

when u201801u2032.

p_month = u2018Januaryu2019(701).

when u201802u2032.

p_month = u2018Februaryu2019(702).

when u201803u2032.

p_month = u2018Marchu2019(703).

when u201804u2032.

p_month = u2018Aprilu2019(704).

when u201805u2032.

p_month = u2018Mayu2019(705).

when u201806u2032.

p_month = u2018Juneu2019(706).

when u201807u2032.

p_month = u2018Julyu2019(707).

when u201808u2032.

p_month = u2018Augustu2019(708).

when u201809u2032.

p_month = u2018Septemberu2019(709).

when u201810u2032.

p_month = u2018Octoberu2019(710).

when u201811u2032.

p_month = u2018Novemberu2019(711).

when u201812u2032.

p_month = u2018Decemberu2019(712).

endcase.

concatenate p_yyyymm+0(4) u2018->u2019 p_month into p_month.

endform. u201C GET_MONTH

[Former Member]

hi,

in transaction SE24>Display object "CL_SALV_TREE">Click Button CLASS DOCUMENTATION.

In the documentation, at the end you can find gud example.

Reg,

NJ