Validation on ALV screen

[Former Member]

Hi All,

Iam using ALV grid display in my program.

I have two columns say A and B botha rre numeric.

A can be modified where as B cannot.

I will enter some value in A say 5 where as B is 3.

Then we will save that layout ,while saving i want apopup saying you cant enter more than B.

Is it possible to know which row he ahs changed.

is that possible in REUSE_ALV_GRID_DISPLAY.

With Regards,

Kiran I

[Former Member]

gd_repid LIKE sy-repid, "Exists
ref_grid TYPE REF TO cl_gui_alv_grid. "new

then insert the following code in your USER_COMMAND routine...

FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.

IF ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
* ET_EXCLUDING =
* E_FLG_NO_HTML =
* E_REPID =
e_grid = ref_grid
* ES_LAYOUT_KKBLO =
.
ENDIF.

IF NOT ref_grid IS INITIAL.
CALL METHOD ref_grid->check_changed_data
* IMPORTING
* E_VALID =
* CHANGING
* C_REFRESH = 'X'
.
ENDIF.

Note try to take backup before calling FM, and then using that you can compare the data,

[Former Member]

you can compare the data, in SAVE sy-ucomm, and then give pop up based on your condition...

<b>selfield TYPE slis_selfield.</b>

Using SELFIELD you can find index and fieldname also,

but your case use index and read record then give pop up according to your requirement

[Former Member]

Hi Vijay,

can you please send me the sample code for that

with regards,

kiran i

[Former Member]

REPORT  ZTESTDFALV1                             .

*Data Declaration
*----------------
DATA: BEGIN OF T_EKKO,
  SELECT(1),
  EBELN TYPE EKPO-EBELN,
  EBELP TYPE EKPO-EBELP,
 END OF T_EKKO.

DATA: BEGIN OF IT_EKKO OCCURS 0.
        INCLUDE STRUCTURE T_EKKO.
DATA: END OF IT_EKKO.

*ALV data declarations
TYPE-POOLS: SLIS.                                 "ALV Declarations
DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      GD_LAYOUT    TYPE SLIS_LAYOUT_ALV,
      GD_REPID     LIKE SY-REPID.


************************************************************************
*Start-of-selection.
START-OF-SELECTION.

  PERFORM DATA_RETRIEVAL.
  PERFORM BUILD_FIELDCATALOG.
  PERFORM BUILD_LAYOUT.
  PERFORM DISPLAY_ALV_REPORT.


*&--------------------------------------------------------------------*
*&      Form  build_fieldcatalog
*&--------------------------------------------------------------------*
*       text
*---------------------------------------------------------------------*
FORM BUILD_FIELDCATALOG.
  REFRESH FIELDCATALOG.
  CLEAR FIELDCATALOG.
*
  FIELDCATALOG-FIELDNAME   = 'SELECT'.
  FIELDCATALOG-SELTEXT_M   = 'Select please'.
  FIELDCATALOG-CHECKBOX    = 'X'.
  FIELDCATALOG-EDIT        = 'X'.
  FIELDCATALOG-INPUT       = 'X'.
  FIELDCATALOG-COL_POS     = 1.
  APPEND FIELDCATALOG.
  CLEAR  FIELDCATALOG.

  FIELDCATALOG-FIELDNAME   = 'EBELN'.
  FIELDCATALOG-SELTEXT_M   = 'Purchase Order'.
  FIELDCATALOG-HOTSPOT     = 'X'.
  FIELDCATALOG-COL_POS     = 2.
  APPEND FIELDCATALOG.
  CLEAR  FIELDCATALOG.

  FIELDCATALOG-FIELDNAME   = 'EBELP'.
  FIELDCATALOG-SELTEXT_M   = 'PO Item'.
  FIELDCATALOG-COL_POS     = 3.
  APPEND FIELDCATALOG.
  CLEAR  FIELDCATALOG.

ENDFORM.                    " BUILD_FIELDCATALOG


*&---------------------------------------------------------------------*
*&      Form  BUILD_LAYOUT
*&---------------------------------------------------------------------*
*       Build layout for ALV grid report
*----------------------------------------------------------------------*
FORM BUILD_LAYOUT.
  "Permet d'ajuster les colonnes au text
*  gd_layout-colwidth_optimize = 'X'.
  GD_LAYOUT-TOTALS_TEXT       = 'Totals'(201).

*  gd_layout-box_fieldname = 'SELECT'.
*  gd_layout-box_tabname   = 'IT_EKKO'.

ENDFORM.                    " BUILD_LAYOUT


*&---------------------------------------------------------------------*
*&      Form  DISPLAY_ALV_REPORT
*&---------------------------------------------------------------------*
*       Display report using ALV grid
*----------------------------------------------------------------------*
FORM DISPLAY_ALV_REPORT.
  GD_REPID = SY-REPID.
  CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM        = GD_REPID
*            i_callback_top_of_page   = 'TOP-OF-PAGE'
            I_CALLBACK_PF_STATUS_SET  = 'SET_PF_STATUS'
            I_CALLBACK_USER_COMMAND   = 'USER_COMMAND'
*            i_grid_title             = 'My Title'
            IS_LAYOUT                 = GD_LAYOUT
            IT_FIELDCAT               = FIELDCATALOG[]
       TABLES
            T_OUTTAB                  = IT_EKKO
       EXCEPTIONS
            PROGRAM_ERROR             = 1
            OTHERS                    = 2.

  IF SY-SUBRC <> 0.
    WRITE:/ SY-SUBRC.
  ENDIF.

ENDFORM.                    " DISPLAY_ALV_REPORT


*&---------------------------------------------------------------------*
*&      Form  DATA_RETRIEVAL
*&---------------------------------------------------------------------*
*       Retrieve data form EKPO table and populate itab it_ekko
*----------------------------------------------------------------------*
FORM DATA_RETRIEVAL.
  SELECT EBELN EBELP
   UP TO 10 ROWS
    FROM EKPO
    INTO CORRESPONDING FIELDS OF TABLE  IT_EKKO.
ENDFORM.                    " DATA_RETRIEVAL


*----------------------------------------------------------------------*
*                      FORM SET_PF_STATUS                              *
*----------------------------------------------------------------------*
FORM SET_PF_STATUS USING RT_EXTAB   TYPE  SLIS_T_EXTAB.
  SET PF-STATUS 'STANDARD_FULLSCREEN1' EXCLUDING RT_EXTAB.
ENDFORM.                    "set_pf_status


*&--------------------------------------------------------------------*
*&      Form  user_command
*&--------------------------------------------------------------------*
*       text
*---------------------------------------------------------------------*
*      -->R_UCOMM    text
*      -->RS_SELFIELDtext
*---------------------------------------------------------------------*
FORM USER_COMMAND  USING R_UCOMM LIKE SY-UCOMM
                         RS_SELFIELD TYPE SLIS_SELFIELD.


  <b>DATA: GD_REPID LIKE SY-REPID, "Exists
  REF_GRID TYPE REF TO CL_GUI_ALV_GRID. "new

*then insert the following code in your USER_COMMAND routine...


  IF REF_GRID IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
    E_GRID = REF_GRID
    .
  ENDIF.

  IF NOT REF_GRID IS INITIAL.
    CALL METHOD REF_GRID->CHECK_CHANGED_DATA
    .
  ENDIF.</b>

  CASE R_UCOMM.
    WHEN '&IC1'.
      CHECK RS_SELFIELD-TABINDEX > 0.
      IF RS_SELFIELD-VALUE EQ '6000000001'.
        CALL TRANSACTION 'ZDF2'.
      ENDIF.
    WHEN 'REFRESH'.

      LOOP AT IT_EKKO WHERE SELECT = 'X'.

      ENDLOOP.

      PERFORM DATA_RETRIEVAL.
      RS_SELFIELD-REFRESH = 'X'.

  ENDCASE.
ENDFORM.                    "user_command

Try this in this we can capture the check box value after the edit,

similar way you try ...

regards

vijay

[Former Member]

REPORT  ZTESTDFALV1                             .

*Data Declaration
*----------------
DATA: BEGIN OF T_EKKO,
  EBELN TYPE EKPO-EBELN,
  EBELP TYPE EKPO-EBELP,
 END OF T_EKKO.

DATA: BEGIN OF IT_EKKO OCCURS 0.
        INCLUDE STRUCTURE T_EKKO.
DATA: END OF IT_EKKO.

DATA: BEGIN OF IT_BACKUP OCCURS 0.
        INCLUDE STRUCTURE T_EKKO.
DATA: END OF IT_BACKUP.
*ALV data declarations
TYPE-POOLS: SLIS.                                 "ALV Declarations
DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      GD_LAYOUT    TYPE SLIS_LAYOUT_ALV,
      GD_REPID     LIKE SY-REPID.


************************************************************************
*Start-of-selection.
START-OF-SELECTION.

  PERFORM DATA_RETRIEVAL.
  PERFORM BUILD_FIELDCATALOG.
  PERFORM BUILD_LAYOUT.
  IT_BACKUP[] = IT_EKKO[].
  PERFORM DISPLAY_ALV_REPORT.


*&--------------------------------------------------------------------*
*&      Form  build_fieldcatalog
*&--------------------------------------------------------------------*
*       text
*---------------------------------------------------------------------*
FORM BUILD_FIELDCATALOG.
  REFRESH FIELDCATALOG.
  CLEAR FIELDCATALOG.
*

  FIELDCATALOG-FIELDNAME   = 'EBELN'.
  FIELDCATALOG-SELTEXT_M   = 'Purchase Order'.
  FIELDCATALOG-INPUT     = 'X'.
  FIELDCATALOG-EDIT     = 'X'.
  FIELDCATALOG-COL_POS     = 2.
  APPEND FIELDCATALOG.
  CLEAR  FIELDCATALOG.

  FIELDCATALOG-FIELDNAME   = 'EBELP'.
  FIELDCATALOG-SELTEXT_M   = 'PO Item'.
  FIELDCATALOG-COL_POS     = 3.
  APPEND FIELDCATALOG.
  CLEAR  FIELDCATALOG.

ENDFORM.                    " BUILD_FIELDCATALOG


*&---------------------------------------------------------------------*
*&      Form  BUILD_LAYOUT
*&---------------------------------------------------------------------*
*       Build layout for ALV grid report
*----------------------------------------------------------------------*
FORM BUILD_LAYOUT.
  "Permet d'ajuster les colonnes au text
*  gd_layout-colwidth_optimize = 'X'.
  GD_LAYOUT-TOTALS_TEXT       = 'Totals'(201).

*  gd_layout-box_fieldname = 'SELECT'.
*  gd_layout-box_tabname   = 'IT_EKKO'.

ENDFORM.                    " BUILD_LAYOUT


*&---------------------------------------------------------------------*
*&      Form  DISPLAY_ALV_REPORT
*&---------------------------------------------------------------------*
*       Display report using ALV grid
*----------------------------------------------------------------------*
FORM DISPLAY_ALV_REPORT.
  GD_REPID = SY-REPID.
  CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM        = GD_REPID
*            i_callback_top_of_page   = 'TOP-OF-PAGE'
            I_CALLBACK_PF_STATUS_SET  = 'SET_PF_STATUS'
            I_CALLBACK_USER_COMMAND   = 'USER_COMMAND'
*            i_grid_title             = 'My Title'
            IS_LAYOUT                 = GD_LAYOUT
            IT_FIELDCAT               = FIELDCATALOG[]
       TABLES
            T_OUTTAB                  = IT_EKKO
       EXCEPTIONS
            PROGRAM_ERROR             = 1
            OTHERS                    = 2.

  IF SY-SUBRC <> 0.
    WRITE:/ SY-SUBRC.
  ENDIF.

ENDFORM.                    " DISPLAY_ALV_REPORT


*&---------------------------------------------------------------------*
*&      Form  DATA_RETRIEVAL
*&---------------------------------------------------------------------*
*       Retrieve data form EKPO table and populate itab it_ekko
*----------------------------------------------------------------------*
FORM DATA_RETRIEVAL.
  SELECT EBELN EBELP
   UP TO 10 ROWS
    FROM EKPO
    INTO CORRESPONDING FIELDS OF TABLE  IT_EKKO.
ENDFORM.                    " DATA_RETRIEVAL


*----------------------------------------------------------------------*
*                      FORM SET_PF_STATUS                              *
*----------------------------------------------------------------------*
FORM SET_PF_STATUS USING RT_EXTAB   TYPE  SLIS_T_EXTAB.
  SET PF-STATUS 'STANDARD_FULLSCREEN1' EXCLUDING RT_EXTAB.
ENDFORM.                    "set_pf_status


*&--------------------------------------------------------------------*
*&      Form  user_command
*&--------------------------------------------------------------------*
*       text
*---------------------------------------------------------------------*
*      -->R_UCOMM    text
*      -->RS_SELFIELDtext
*---------------------------------------------------------------------*
FORM USER_COMMAND  USING R_UCOMM LIKE SY-UCOMM
                         RS_SELFIELD TYPE SLIS_SELFIELD.


  DATA: GD_REPID LIKE SY-REPID, "Exists
  REF_GRID TYPE REF TO CL_GUI_ALV_GRID. "new

*then insert the following code in your USER_COMMAND routine...


  IF REF_GRID IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        E_GRID = REF_GRID.
  ENDIF.

  IF NOT REF_GRID IS INITIAL.
    CALL METHOD REF_GRID->CHECK_CHANGED_DATA
      .
  ENDIF.



  CASE R_UCOMM.
    WHEN '&IC1'.
      CHECK RS_SELFIELD-TABINDEX > 0.
      IF RS_SELFIELD-VALUE EQ '6000000001'.
        CALL TRANSACTION 'ZDF2'.
      ENDIF.
    WHEN 'REFRESH'.

      READ TABLE IT_EKKO INDEX  RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        READ TABLE IT_BACKUP INDEX RS_SELFIELD-TABINDEX.
        IF SY-SUBRC = 0.
          IF IT_EKKO <> IT_BACKUP.
*  then do your check
          ENDIF.
        ENDIF.
      ENDIF.

      PERFORM DATA_RETRIEVAL.
      RS_SELFIELD-REFRESH = 'X'.

  ENDCASE.
ENDFORM.                    "user_command

hi This will Have Input Edit field check this also..

regards

vijay

[Former Member]

Hi

Please see the above Code, For Helpful Answers Please reward points.

regards

vijay

[Former Member]

If you need any thing further please let me know,

I hope this will solve your Problem..

regards

vijay

[Former Member]

Hi kiran,

when 'SAVE'

Data ref1 type ref to cl_gui_alv_grid.

CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'

IMPORTING

E_GRID = ref1.

call method ref1->check_changed_data

Loop at itab.

if itab-cola Gt colb.

use FM for POP UP

endif.

endloop.

[Former Member]

When 'SAVE'

CALL METHOD W_GRID->CHECK_CHANGED_DATA

IMPORTING

E_VALID = L_VALID.

*l_valid will return X if any data is changed on grid

IF L_VALID = 'X'.

loop at itab.

if col A GT col B.

use the FM to get popup(will give u if needed).

endif.

endloop.

endif.