triggering mail

[Former Member]

hello experts,

how to trigger mail after successful execution of background job??

any sample code???

[Former Member]

Hi,

Here is a really simple example.

report zrich_0003 .

data: maildata type sodocchgi1.

data: mailtxt type table of solisti1 with header line.

data: mailrec type table of somlrec90 with header line.

start-of-selection.

clear: maildata, mailtxt, mailrec.

refresh: mailtxt, mailrec.

maildata-obj_name = 'TEST'.

maildata-obj_descr = 'Test'.

maildata-obj_langu = sy-langu.

mailtxt-line = 'This is a test'.

append mailtxt.

mailrec-receiver = 'you@yourcompany.com'.

mailrec-rec_type = 'U'.

append mailrec.

call function 'SO_NEW_DOCUMENT_SEND_API1'

exporting

document_data = maildata

document_type = 'RAW'

put_in_outbox = 'X'

tables

object_header = mailtxt

object_content = mailtxt

receivers = mailrec

exceptions

too_many_receivers = 1

document_not_sent = 2

document_type_not_exist = 3

operation_no_authorization = 4

parameter_error = 5

x_error = 6

enqueue_error = 7

others = 8.

• Start the send process with this code or go to transaction SCOT

• submit rsconn01 with mode = 'INT' and return.

Regards

[Former Member]

Hi

write a Program for sending mails using the fun module

SO_NEW_DOCUMENT_ATT_SEND_API1

in the program to check the status of the Job write a select statment to the table

TBTCP

pass the Program name of the scheduled and take the STATUS field from this table

Put a condition for the fun module code to sent mail

if the STATUS = F (job is finished)

.....code...for sending mail..

endif.

<b>Reward points for useful Answers</b>

Regards

Anji

[Former Member]

Hi,

Check this sample code..

• Declarations.

PARAMETERS: p_email(50) LOWER CASE.

DATA: document_data LIKE sodocchgi1.

DATA: t_content LIKE STANDARD TABLE OF solisti1.

DATA: s_content LIKE solisti1.

DATA: t_receivers LIKE STANDARD TABLE OF somlreci1.

DATA: s_receivers LIKE somlreci1.

START-OF-SELECTION.

• Receivers.

s_receivers-receiver = p_email.

s_receivers-rec_type = 'U'.

s_receivers-express = 'X'.

APPEND s_receivers TO t_receivers.

• Subject

document_data-obj_descr = 'New mail from Sap'.

• Body

s_content = 'Hi,'.

APPEND s_content TO t_content.

CLEAR: s_content.

APPEND s_content TO t_content.

s_content = 'Test email from sap, please don''t reply to this email'.

APPEND s_content TO t_content.

CLEAR: s_content.

APPEND s_content TO t_content.

s_content = 'Thanks,'.

APPEND s_content TO t_content.

s_content = 'Naren.'.

APPEND s_content TO t_content.

• Send the email.

CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'

EXPORTING

document_data = document_data

TABLES

object_content = t_content

receivers = t_receivers

EXCEPTIONS

too_many_receivers = 1

document_not_sent = 2

document_type_not_exist = 3

operation_no_authorization = 4

parameter_error = 5

x_error = 6

enqueue_error = 7

OTHERS = 8.

IF sy-subrc <> 0.

MESSAGE e208(00) WITH 'Error in sending email :-(('.

ELSE.

MESSAGE s208(00) WITH 'Email sent )'.

ENDIF.

SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.

<b>Reward points if useful</b>

Regards

Ashu

[Former Member]

" After the Back ground jobs are Completed they Genarate the Spool  reuqest

...

" getting that spool request  no's   you can run a  program which will send   a mail 
"  to the specific  mail id  .

this is the program

REPORT  zspooltopdf.

PARAMETER: p_email1 LIKE somlreci1-receiver
                                    DEFAULT 'loganathan.girishkumar@tcs.com',
           p_sender LIKE somlreci1-receiver
                                    DEFAULT 'loganathan.girishkumar@tcs.com',
           p_delspl  AS CHECKBOX.

*DATA DECLARATION
DATA: gd_recsize TYPE i.

* Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.

* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.


DATA:  w_recsize TYPE i.

DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.

* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.

* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.

CONSTANTS: c_dev LIKE  sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.

************************************************************************
*START-OF-SELECTION.
START-OF-SELECTION.

* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
  WRITE 'Hello World'.
  new-page.
  commit work.
  new-page print off.

  IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.

************************************
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
*        to sap-spool
*        spool parameters   %_print
*        archive parameters %_print
*        without spool dynpro
*        and return.
************************************

* Get spool id from program called above 
*  IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.

    PERFORM convert_spool_to_pdf.
    PERFORM process_email.

    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.

    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
  ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
  ENDIF.


*---------------------------------------------------------------------*
*       FORM obtain_spool_id                                          *
*---------------------------------------------------------------------*
FORM obtain_spool_id.
  CHECK NOT ( gd_jobname IS INITIAL ).
  CHECK NOT ( gd_jobcount IS INITIAL ).

  SELECT * FROM  tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.

  READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
  IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
  ELSE.
    MESSAGE s005(zdd).
  ENDIF.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM get_job_details                                          *
*---------------------------------------------------------------------*
FORM get_job_details.
* Get current job details
  CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM convert_spool_to_pdf                                     *
*---------------------------------------------------------------------*
FORM convert_spool_to_pdf.

  CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed  = 11
            OTHERS                   = 12.

  CHECK sy-subrc = 0.

* Transfer the 132-long strings to 255-long strings
  LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
  ENDLOOP.

  TRANSLATE gd_buffer USING '~ '.

  DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
  ENDDO.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM process_email                                            *
*---------------------------------------------------------------------*
FORM process_email.
  DESCRIBE TABLE it_mess_att LINES gd_recsize.
  CHECK gd_recsize > 0.
  PERFORM send_email USING p_email1.
*  perform send_email using p_email2.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM send_email                                               *
*---------------------------------------------------------------------*
*  -->  p_email                                                       *
*---------------------------------------------------------------------*
FORM send_email USING p_email.
  CHECK NOT ( p_email IS INITIAL ).

  REFRESH it_mess_bod.

* Default subject matter
  gd_subject         = 'Subject'.
  gd_attachment_desc = 'Attachname'.
*  CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
  it_mess_bod        = 'Message Body text, line 1'.
  APPEND it_mess_bod.
  it_mess_bod        = 'Message Body text, line 2...'.
  APPEND it_mess_bod.

* If no sender specified - default blank
  IF p_sender EQ space.
    gd_sender_type  = space.
  ELSE.
    gd_sender_type  = 'INT'.
  ENDIF.


* Send file by email as .xls speadsheet
  PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                using p_email
                                      'Example .xls documnet attachment'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM delete_spool                                             *
*---------------------------------------------------------------------*
FORM delete_spool.
  DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.

  ld_spool_nr = gd_spool_nr.

  CHECK p_delspl <> c_no.
  CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.


*&---------------------------------------------------------------------*
*&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
*&---------------------------------------------------------------------*
*       Send email
*----------------------------------------------------------------------*
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.


  DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE  somlreci1-receiver,
        ld_format TYPE  so_obj_tp ,
        ld_attdescription TYPE  so_obj_nam ,
        ld_attfilename TYPE  so_obj_des ,
        ld_sender_address LIKE  soextreci1-receiver,
        ld_sender_address_type LIKE  soextreci1-adr_typ,
        ld_receiver LIKE  sy-subrc.

data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1.


  ld_email   = p_email.
  ld_mtitle = p_mtitle.
  ld_format              = p_format.
  ld_attdescription      = p_attdescription.
  ld_attfilename         = p_filename.
  ld_sender_address      = p_sender_address.
  ld_sender_address_type = p_sender_addres_type.


* Fill the document data.
  w_doc_data-doc_size = 1.

* Populate the subject/generic message attributes
  w_doc_data-obj_langu = sy-langu.
  w_doc_data-obj_name  = 'SAPRPT'.
  w_doc_data-obj_descr = ld_mtitle .
  w_doc_data-sensitivty = 'F'.

* Fill the document data and get size of attachment
  CLEAR w_doc_data.
  READ TABLE it_attach INDEX w_cnt.
  w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
  w_doc_data-obj_langu  = sy-langu.
  w_doc_data-obj_name   = 'SAPRPT'.
  w_doc_data-obj_descr  = ld_mtitle.
  w_doc_data-sensitivty = 'F'.
  CLEAR t_attachment.
  REFRESH t_attachment.
  t_attachment[] = it_attach[].

* Describe the body of the message
  CLEAR t_packing_list.
  REFRESH t_packing_list.
  t_packing_list-transf_bin = space.
  t_packing_list-head_start = 1.
  t_packing_list-head_num = 0.
  t_packing_list-body_start = 1.
  DESCRIBE TABLE it_message LINES t_packing_list-body_num.
  t_packing_list-doc_type = 'RAW'.
  APPEND t_packing_list.

* Create attachment notification
  t_packing_list-transf_bin = 'X'.
  t_packing_list-head_start = 1.
  t_packing_list-head_num   = 1.
  t_packing_list-body_start = 1.

  DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
  t_packing_list-doc_type   =  ld_format.
  t_packing_list-obj_descr  =  ld_attdescription.
  t_packing_list-obj_name   =  ld_attfilename.
  t_packing_list-doc_size   =  t_packing_list-body_num * 255.
  APPEND t_packing_list.

* Add the recipients email address
  CLEAR t_receivers.
  REFRESH t_receivers.
  t_receivers-receiver = ld_email.
  t_receivers-rec_type = 'U'.
  t_receivers-com_type = 'INT'.
  t_receivers-notif_del = 'X'.
  t_receivers-notif_ndel = 'X'.
  APPEND t_receivers.

  CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.

* Populate zerror return code
  ld_error = sy-subrc.

* Populate zreceiver return code
  LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
  ENDLOOP.
ENDFORM.

reward points if it is usefull ...

Girish

[stefan_upmeierzubelzen]

Hi Girish,

which message text did you user for message-id ZDD 004?

Best regards

Stefan

[Former Member]

I have never used it, but the Schedule Manager (Transaction SCMA) gives functionality to schedule tasks to run in background and includes emails once finished.

Andrew

From the SAP documentation in the transaction:

===================================

Process Flow

1. The system executes the processing steps.

2. Once the system has executed all processing steps, the user receives a mail stating that the scheduled sequence of processing steps was executed. This mail is generated through the workflow linkage.

3. You can repeat the processing of faulty objects directly from the mail.

4. The user can view the processed objects with their processing status in the monitor of the worklist.

5. The user corrects the errors in the objects.

6. The user retriggers the processing step sequence from the mail in his office inbox.

7. The system now processes the objects of the scope of selection that were processed with errors in the first run of the processing sequence or for which processing was forced manually.

[Former Member]

In SM36 there is the spool receipt OF RECEIPENT ... CLICK on it .

in the Receipent ..... there is 2 parameter palce ... in the second one if you do F4 ...there is Internet Address ... select it and then give the Email id in the first parameter ...select Express Checkbox ...

Copy as save button .

and give you job name , job class, start condition, ...

in steps tab give the program with varient ...press the ok buttons so that it will be scheduled and once the schduled job is completed ...

goto SCOT trascation Run the timer icon so that your Email will be despatched to mentioned addresse .

reward points if it is usefull

Girish

[Former Member]

hi,

go to following thread..

<b>plz reward if useful</b>

Swati

[Former Member]

Hi saurabh ,

if you want to have a customized mails to the customer

you can use below function modules if you want detailed code leet me kowe SO_NEW_DOCUMENT_ATT_SEND_API1 with attchment

SO_NEW_DOCUMENT_SEND_API1 with out attchment

if you want to configure the sap mail after back ground job do as below

goto SM36 mention the spool list receipt

and save with your job name

you can also select here mail through distribution list or to the external mails .

best regards ,

srinu reddy

[aris_hidalgo]

Hi,

Include this code after you call the FM SO_DOCUMENT_SEND_API1:

WAIT UP TO 2 SECONDS.
    SUBMIT rsconn01 WITH mode = 'INT'
                  WITH output = 'X'
                  AND RETURN.

Hope it helps...

P.S. Please award points if it helps...