saving data from table control to database

[Former Member]

Hello,

I am using a table control in which i am inputting data manually (not pre-populated) and want to save the records in the database. But when i loop the internal table(empty at first) with the table control in PBO. After the PBO, i have 12 empty rows in the internal table,as there are 12 visible rows in the table control. Because of this, when i save the internal table in database, i get runtime error of 'duplicate records exists in the database. Hope you all have understood.

Thanks

Shehryar

[Former Member]

Hello

For your 12 entry check out that where the internal table filled in PBO.

You can write a module to read input entry from table control

using write a module MODULE READ_TABLE_CONTROL.

in PAI

&----

---

*& Module READ_TABLE_CONTROL INPUT

&----

---

• text

----

---

MODULE READ_TABLE_CONTROL INPUT.

glb_field = tabcont_field.

ENDMODULE. " READ_TABLE_CONTROL INPUT

Hope this will help you

[Former Member]

Hi,

In the PBO write DESCRIBE TABLE <ITAB> ....... Statement and try..

Regards,

Sathish Reddy.

[Former Member]

AoA,

That will give me 12 lines. Your point ?

Thanks

Shehryarb

[former_member745780]

Hello

For your 12 entry check out that where the internal table filled in PBO.

You can write a module to read input entry from table control

using write a module MODULE READ_TABLE_CONTROL.

in PAI

&----

---

*& Module READ_TABLE_CONTROL INPUT

&----

---

• text

----

---

MODULE READ_TABLE_CONTROL INPUT.

glb_field = tabcont_field.

ENDMODULE. " READ_TABLE_CONTROL INPUT

Hope this will help you

[Former Member]

Hi,

can you give the sample code...what you have written in PBO and PAI...

Regards,

Satish Reddy.

[Former Member]

&----

---

*& Module USER_COMMAND_9200 INPUT

&----

---

• text

----

---

module USER_COMMAND_9200 input.

CASE OK_CODE1.

WHEN 'GO'.

*ROUTINE GETDATA

PERFORM GETDATA.

CLEAR OK_CODE1.

*&& BACK

when 'CANCEL'.

leave program.

WHEN 'BACK'.

CLEAR : I_TAB, I_TAB1,AFKO-PLNBEZ,ZMATKL,T001W-WERKS,AFKO-GSTRP,flag,count,qtyflag.

REFRESH : I_TAB1.

LEAVE TO SCREEN 9100.

*&& SAVE INSERT DATA TO ZPPT_CONFIRM

WHEN 'SAVE'.

data : co type C,

del type c.

LOOP AT I_TAB1.

IF I_TAB1-LMNGA IS NOT INITIAL OR

I_TAB1-LMNGA1 IS NOT INITIAL. "OR

• I_TAB1-XMNGA IS NOT INITIAL.

if I_TAB1-EMPNO <> space and I_TAB1-EMPNO+0(1) <> 'P'.

• MESSAGE I991(ZMESSAGE) with 'ENTER INSPECTOR NUMBER at Line' sy-tabix.

continue.

endif.

clear : v_charg.

SELECT single CHARG FROM MCHB into v_charg

WHERE LGORT = '1080'

AND LVORM <> 'X'

AND CHARG = I_TAB1-CHARG.

if sy-subrc <> 0.

Message 'Enter correct batch' type 'W'.

continue.

endif.

IF I_TAB1-LMNGA IS NOT INITIAL AND

I_TAB1-CHARG IS INITIAL.

MESSAGE 'Enter Batch' TYPE 'S'.

ELSE.

*&& ACTIVITY 10

ZPPT_CONFIRM-CDATE = SY-DATUM.

ZPPT_CONFIRM-CTIME = SY-UZEIT.

ZPPT_CONFIRM-PDATE = afko-gstrp.

ZPPT_CONFIRM-WERKS = T001W-WERKS.

ZPPT_CONFIRM-DISPO = '103'. "MRP CONTROLLER

ZPPT_CONFIRM-VORNR = '0010'.

ZPPT_CONFIRM-AUFNR = I_TAB1-AUFNR. "ORDER NO

ZPPT_CONFIRM-ZSUPNO = ZPP_SUP_MRP-ZSUPNO.

ZPPT_CONFIRM-AUFART = 'ZH23'. "ORDER TYPE

ZPPT_CONFIRM-MATNR = I_TAB1-PLNBEZ. "MATERIAL

ZPPT_CONFIRM-MAKTX = I_TAB1-WGBEZ.

ZPPT_CONFIRM-GAMNG = I_TAB1-GAMNG.

ZPPT_CONFIRM-LMNGA = I_TAB1-LMNGA. "MOULD FILL

• ZPPT_CONFIRM-GRUND = I_TAB1-GRUND. "reason for scrap

ZPPT_CONFIRM-ZSUPNAME = SNAME. "supervioser name

ZPPT_CONFIRM-CHARG = I_TAB1-CHARG. "batch

ZPPT_CONFIRM-ZHODNO = V_ZHODNO.

ZPPT_CONFIRM-FEVOR = V_PRDSCHED. "PRODUCT SCHEDULER

ZPPT_CONFIRM-PERNR = I_TAB1-pernr.

ZPPT_CONFIRM-ENAME = I_TAB1-ENAME.

ZPPT_CONFIRM-ZUSER = sy-uname.

sno = sno + 1.

ZPPT_CONFIRM-sno = sno.

INSERT ZPPT_CONFIRM.

CLEAR ZPPT_CONFIRM.

*&& ACTIVITY 20

if I_TAB1-XMNGA1 <> space.

ZPPT_CONFIRM-CDATE = SY-DATUM.

ZPPT_CONFIRM-CTIME = SY-UZEIT.

ZPPT_CONFIRM-PDATE = afko-gstrp.

ZPPT_CONFIRM-WERKS = T001W-WERKS.

ZPPT_CONFIRM-DISPO = '103'.

ZPPT_CONFIRM-VORNR = '0020'.

ZPPT_CONFIRM-AUFNR = I_TAB1-AUFNR.

ZPPT_CONFIRM-ZSUPNO = ZPP_SUP_MRP-ZSUPNO.

ZPPT_CONFIRM-AUFART = 'ZH23'.

ZPPT_CONFIRM-MATNR = I_TAB1-PLNBEZ.

ZPPT_CONFIRM-MAKTX = I_TAB1-WGBEZ.

ZPPT_CONFIRM-GAMNG = I_TAB1-GAMNG.

ZPPT_CONFIRM-XMNGA = I_TAB1-XMNGA1. "SCARP

if I_TAB1-XMNGA1 is NOT INITIAL.

ZPPT_CONFIRM-LMNGA = I_TAB1-LMNGA1. "CARRYOUT

ZPPT_CONFIRM-GRUND = '0001'. "reason for scrap

CO = 'X'.

endif.

ZPPT_CONFIRM-ZSUPNAME = SNAME.

• ZPPT_CONFIRM-CHARG = I_TAB1-CHARG.

ZPPT_CONFIRM-ZHODNO = V_ZHODNO.

ZPPT_CONFIRM-FEVOR = V_PRDSCHED.

ZPPT_CONFIRM-PERNR = I_TAB1-pernr.

ZPPT_CONFIRM-ENAME = I_TAB1-ENAME.

ZPPT_CONFIRM-ZUSER = sy-uname.

sno = sno + 1.

ZPPT_CONFIRM-sno = sno.

INSERT ZPPT_CONFIRM.

CLEAR ZPPT_CONFIRM.

endif.

if I_TAB1-XMNGA2 <> space.

ZPPT_CONFIRM-CDATE = SY-DATUM.

ZPPT_CONFIRM-CTIME = SY-UZEIT.

ZPPT_CONFIRM-PDATE = afko-gstrp.

ZPPT_CONFIRM-WERKS = T001W-WERKS.

ZPPT_CONFIRM-DISPO = '103'.

ZPPT_CONFIRM-VORNR = '0020'.

ZPPT_CONFIRM-AUFNR = I_TAB1-AUFNR.

ZPPT_CONFIRM-ZSUPNO = ZPP_SUP_MRP-ZSUPNO.

ZPPT_CONFIRM-AUFART = 'ZH23'.

ZPPT_CONFIRM-MATNR = I_TAB1-PLNBEZ.

ZPPT_CONFIRM-MAKTX = I_TAB1-WGBEZ.

ZPPT_CONFIRM-GAMNG = I_TAB1-GAMNG.

• ZPPT_CONFIRM-LMNGA = I_TAB1-LMNGA1. "CARRYOUT

ZPPT_CONFIRM-XMNGA = I_TAB1-XMNGA2. "SCARP

if I_TAB1-XMNGA2 is NOT INITIAL.

ZPPT_CONFIRM-GRUND = '0002'. "reason for scrap

if co <> 'X'.

ZPPT_CONFIRM-LMNGA = I_TAB1-LMNGA1. "CARRYOUT

co = 'X'.

endif.

endif.

ZPPT_CONFIRM-ZSUPNAME = SNAME.

• ZPPT_CONFIRM-CHARG = I_TAB1-CHARG.

ZPPT_CONFIRM-ZHODNO = V_ZHODNO.

ZPPT_CONFIRM-FEVOR = V_PRDSCHED.

ZPPT_CONFIRM-PERNR = I_TAB1-pernr.

ZPPT_CONFIRM-ENAME = I_TAB1-ENAME.

ZPPT_CONFIRM-ZUSER = sy-uname.

sno = sno + 1.

ZPPT_CONFIRM-sno = sno.

INSERT ZPPT_CONFIRM.

CLEAR ZPPT_CONFIRM.

endif.

if I_TAB1-XMNGA3 <> space.

ZPPT_CONFIRM-CDATE = SY-DATUM.

ZPPT_CONFIRM-CTIME = SY-UZEIT.

ZPPT_CONFIRM-PDATE = afko-gstrp.

ZPPT_CONFIRM-WERKS = T001W-WERKS.

ZPPT_CONFIRM-DISPO = '103'.

ZPPT_CONFIRM-VORNR = '0020'.

ZPPT_CONFIRM-AUFNR = I_TAB1-AUFNR.

ZPPT_CONFIRM-ZSUPNO = ZPP_SUP_MRP-ZSUPNO.

ZPPT_CONFIRM-AUFART = 'ZH23'.

ZPPT_CONFIRM-MATNR = I_TAB1-PLNBEZ.

ZPPT_CONFIRM-MAKTX = I_TAB1-WGBEZ.

ZPPT_CONFIRM-GAMNG = I_TAB1-GAMNG.

• ZPPT_CONFIRM-LMNGA = I_TAB1-LMNGA1. "CARRYOUT

ZPPT_CONFIRM-XMNGA = I_TAB1-XMNGA3. "SCARP

if I_TAB1-XMNGA3 is NOT INITIAL.

ZPPT_CONFIRM-GRUND = '0003'. "reason for scrap

if co <> 'X'.

ZPPT_CONFIRM-LMNGA = I_TAB1-LMNGA1. "CARRYOUT

co = 'X'.

endif.

endif.

ZPPT_CONFIRM-ZSUPNAME = SNAME.

• ZPPT_CONFIRM-CHARG = I_TAB1-CHARG.

ZPPT_CONFIRM-ZHODNO = V_ZHODNO.

ZPPT_CONFIRM-FEVOR = V_PRDSCHED.

ZPPT_CONFIRM-PERNR = I_TAB1-pernr.

ZPPT_CONFIRM-ENAME = I_TAB1-ENAME.

ZPPT_CONFIRM-ZUSER = sy-uname.

sno = sno + 1.

ZPPT_CONFIRM-sno = sno.

INSERT ZPPT_CONFIRM.

CLEAR ZPPT_CONFIRM.

endif.

if I_TAB1-XMNGA4 <> space.

ZPPT_CONFIRM-CDATE = SY-DATUM.

ZPPT_CONFIRM-CTIME = SY-UZEIT.

ZPPT_CONFIRM-PDATE = afko-gstrp.

ZPPT_CONFIRM-WERKS = T001W-WERKS.

ZPPT_CONFIRM-DISPO = '103'.

ZPPT_CONFIRM-VORNR = '0020'.

ZPPT_CONFIRM-AUFNR = I_TAB1-AUFNR.

ZPPT_CONFIRM-ZSUPNO = ZPP_SUP_MRP-ZSUPNO.

ZPPT_CONFIRM-AUFART = 'ZH23'.

ZPPT_CONFIRM-MATNR = I_TAB1-PLNBEZ.

ZPPT_CONFIRM-MAKTX = I_TAB1-WGBEZ.

ZPPT_CONFIRM-GAMNG = I_TAB1-GAMNG.

• ZPPT_CONFIRM-LMNGA = I_TAB1-LMNGA1. "CARRYOUT

ZPPT_CONFIRM-XMNGA = I_TAB1-XMNGA4. "SCARP

if I_TAB1-XMNGA4 is NOT INITIAL.

ZPPT_CONFIRM-GRUND = '0004'. "reason for scrap

if co <> 'X'.

ZPPT_CONFIRM-LMNGA = I_TAB1-LMNGA1. "CARRYOUT

co = 'X'.

endif.

endif.

ZPPT_CONFIRM-ZSUPNAME = SNAME.

• ZPPT_CONFIRM-CHARG = I_TAB1-CHARG.

ZPPT_CONFIRM-ZHODNO = V_ZHODNO.

ZPPT_CONFIRM-FEVOR = V_PRDSCHED.

ZPPT_CONFIRM-PERNR = I_TAB1-pernr.

ZPPT_CONFIRM-ENAME = I_TAB1-ENAME.

ZPPT_CONFIRM-ZUSER = sy-uname.

sno = sno + 1.

ZPPT_CONFIRM-sno = sno.

INSERT ZPPT_CONFIRM.

CLEAR ZPPT_CONFIRM.

endif.

IF SY-SUBRC = 0.

DELETE TABLE I_TAB1 FROM I_TAB1.

ENDIF.

CLEAR ZPPT_CONFIRM.

ENDIF.

ENDIF.

ENDLOOP.

CLEAR OK_CODE1.

ENDCASE.

endmodule. " USER_COMMAND_9200 INPUT

[Former Member]

Hello,

What does the above code do . Kindly pin point the logic and not give the whole source code. It is hard to comprehend this way.

Regards,

Shehryar