Reg - User Exits

[Former Member]

Hi All,

Could u Please tell me what are the ways by which u can Exits at the earlier i.e Short cut

Regards,

A.Thuyavan

[Former Member]

Hi All,

Could u Please tell me what are the ways by which u can Exits at the earlier i.e Short cut

Regards,

A.Thuyavan

[Former Member]

Hi

User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.

The naming standard of function modules for functionmodule exits is:

EXIT_<program name><3 digit suffix>

The call to a functionmodule exit is implemented as:

CALL CUSTOMER.-FUNCTION ❤️ digit suffix>

To find a Exit.

Goto Transaction -- Find The Package

SMOD >f4>Use the Package here to Find the Exits In the Package.

Else if you Want to search by Application Area wise ,

There is one more tab to find the Exits in the Respective Application Area.

Implementing the Exit-- CMOD Create ProjectsAssgn your Component .

Now Run ur Transaction to Check if it Triggers.

Thats it..

Suppose you need to find out all the user exits related to a tcode.

1. Execute the Tcode.

2. Open the SAP program.

3. Get the Development Class.

4. Execute Tcode SE84.

5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'

6. Enter the Development class and execute.

Check out this thread..

1. Type the transaction : system->status-> <PROG. NAME>

2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.

3. Open CMOD utilities->SAP enhancements

EDIT->All selections

4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.

5. The displayed list contains the enhancements names for the transaction You were looking for.

6. Create a project in CMOD and the code in default include->activate.

http://www.erpgenie.com/sap/abap/code/abap26.htm

which gives the list of exits for a tcode

http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm

For information on Exits, check these links

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sapgenie.com/abap/code/abap26.htm

http://www.sap-img.com/abap/what-is-user-exits.htm

http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction

http://www.easymarketplace.de/userexit.php

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sappoint.com/abap/userexit.pdfUser-Exit

http://www.planetsap.com/userexit_main_page.htm

User-Exits

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sap-img.com/ab038.htm

http://www.planetsap.com/userexit_main_page.htm

http://www.sap-basis-abap.com/sapab013.htm

http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283

These links will help you to learn more on user exits.

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm

http://www.planetsap.com/userexit_main_page.htm

http://www.allsaplinks.com/user_exit.html

www.sap-img.com/abap/what-is-user-exits.htm

Also please check these threads for more details about user exits.

1. Document on UserExits in FI/CO

http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc

2. Finding User Exits...

http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits

3. List of all User Exits...

http://www.planetsap.com/userexit_main_page.htm

Reward points for useful Answers

Regards

Anji

[Former Member]

Program for find out BADI and User Exit attached with particular transaction or program

&----

---

*& Report ZNEGI16 *

*& *

&----

---

*& *

*& *

&----

---

REPORT znegi16 .

TABLES : tstc,

tadir,

modsapt,

modact,

trdir,

tfdir,

enlfdir,

sxs_attrt ,

tstct.

DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.

DATA : field1(30).

DATA : v_devclass LIKE tadir-devclass.

PARAMETERS : p_tcode LIKE tstc-tcode,

p_pgmna LIKE tstc-pgmna .

DATA wa_tadir TYPE tadir.

START-OF-SELECTION.

IF NOT p_tcode IS INITIAL.

SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.

ELSEIF NOT p_pgmna IS INITIAL.

tstc-pgmna = p_pgmna.

ENDIF.

IF sy-subrc EQ 0.

SELECT SINGLE * FROM tadir

WHERE pgmid = 'R3TR'

AND object = 'PROG'

AND obj_name = tstc-pgmna.

MOVE : tadir-devclass TO v_devclass.

IF sy-subrc NE 0.

SELECT SINGLE * FROM trdir

WHERE name = tstc-pgmna.

IF trdir-subc EQ 'F'.

SELECT SINGLE * FROM tfdir

WHERE pname = tstc-pgmna.

SELECT SINGLE * FROM enlfdir

WHERE funcname = tfdir-funcname.

SELECT SINGLE * FROM tadir

WHERE pgmid = 'R3TR'

AND object = 'FUGR'

AND obj_name EQ enlfdir-area.

MOVE : tadir-devclass TO v_devclass.

ENDIF.

ENDIF.

SELECT * FROM tadir INTO TABLE jtab

WHERE pgmid = 'R3TR'

AND object IN ('SMOD', 'SXSD')

AND devclass = v_devclass.

SELECT SINGLE * FROM tstct

WHERE sprsl EQ sy-langu

AND tcode EQ p_tcode.

FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.

WRITE:/(19) 'Transaction Code - ',

20(20) p_tcode,

45(50) tstct-ttext.

SKIP.

IF NOT jtab[] IS INITIAL.

WRITE:/(105) sy-uline.

FORMAT COLOR COL_HEADING INTENSIFIED ON.

• Sorting the internal Table

SORT jtab BY object.

DATA : wf_txt(60) TYPE c,

wf_smod TYPE i ,

wf_badi TYPE i ,

wf_object2(30) TYPE c.

CLEAR : wf_smod, wf_badi , wf_object2.

• Get the total SMOD.

LOOP AT jtab INTO wa_tadir.

AT FIRST.

FORMAT COLOR COL_HEADING INTENSIFIED ON.

WRITE:/1 sy-vline,

2 'Enhancement/ Business Add-in',

41 sy-vline ,

42 'Description',

105 sy-vline.

WRITE:/(105) sy-uline.

ENDAT.

CLEAR wf_txt.

AT NEW object.

IF wa_tadir-object = 'SMOD'.

wf_object2 = 'Enhancement' .

ELSEIF wa_tadir-object = 'SXSD'.

wf_object2 = ' Business Add-in'.

ENDIF.

FORMAT COLOR COL_GROUP INTENSIFIED ON.

WRITE:/1 sy-vline,

2 wf_object2,

105 sy-vline.

ENDAT.

CASE wa_tadir-object.

WHEN 'SMOD'.

wf_smod = wf_smod + 1.

SELECT SINGLE modtext INTO wf_txt

FROM modsapt

WHERE sprsl = sy-langu

AND name = wa_tadir-obj_name.

FORMAT COLOR COL_NORMAL INTENSIFIED OFF.

WHEN 'SXSD'.

• For BADis

wf_badi = wf_badi + 1 .

SELECT SINGLE text INTO wf_txt

FROM sxs_attrt

WHERE sprsl = sy-langu

AND exit_name = wa_tadir-obj_name.

FORMAT COLOR COL_NORMAL INTENSIFIED ON.

ENDCASE.

WRITE:/1 sy-vline,

2 wa_tadir-obj_name HOTSPOT ON,

41 sy-vline ,

42 wf_txt,

105 sy-vline.

AT END OF object.

WRITE : /(105) sy-uline.

ENDAT.

ENDLOOP.

WRITE:/(105) sy-uline.

SKIP.

FORMAT COLOR COL_TOTAL INTENSIFIED ON.

WRITE:/ 'No.of Exits:' , wf_smod.

WRITE:/ 'No.of BADis:' , wf_badi.

ELSE.

FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.

WRITE:/(105) 'No userexits or BADis exist'.

ENDIF.

ELSE.

FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.

WRITE:/(105) 'Transaction does not exist'.

ENDIF.

AT LINE-SELECTION.

DATA : wf_object TYPE tadir-object.

CLEAR wf_object.

GET CURSOR FIELD field1.

CHECK field1(8) EQ 'WA_TADIR'.

READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).

MOVE jtab-object TO wf_object.

CASE wf_object.

WHEN 'SMOD'.

SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).

CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

WHEN 'SXSD'.

SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).

CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.

ENDCASE.

[Former Member]

Hi,

There is two ways to check user exit

one is as per tcode - Development class we can check the user exit exists in the development class , we can refer documentation

another one use this report to check the user exit geive the tcode and check

report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.

select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.

move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.

at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.

*---End of Program
Regards,
Nandha
Reward if it helps

[Former Member]

Hi,

Here is the shortcut.

Here is a program that can be used to find user exits per transaction code.

report z_find_user_exit no standard page heading.

tables: tstc, tadir, modsapt, modact,

trdir, tfdir, enlfdir, tstct.

data : jtab like tadir occurs 0 with header line.

data : hotspot(30).

parameters : p_tcode like tstc-tcode obligatory.

at line-selection.

get cursor field hotspot.

check hotspot(4) eq 'JTAB'.

set parameter id 'MON' field sy-lisel+1(10).

call transaction 'SMOD' and skip first screen.

start-of-selection.

perform get_data.

perform write_list.

----

---

• FORM get_data *

----

---

form get_data.

select single * from tstc

where tcode eq p_tcode.

check sy-subrc eq 0.

select single * from tadir

where pgmid = 'R3TR'

and object = 'PROG'

and obj_name = tstc-pgmna.

if sy-subrc ne 0.

select single * from trdir

where name = tstc-pgmna.

if trdir-subc eq 'F'.

select single * from tfdir

where pname = tstc-pgmna.

select single * from enlfdir

where funcname = tfdir-funcname.

select single * from tadir

where pgmid = 'R3TR'

and object = 'FUGR'

and obj_name eq enlfdir-area.

endif.

endif.

select * from tadir into table jtab

where pgmid = 'R3TR'

and object = 'SMOD'

and devclass = tadir-devclass.

select single * from tstct

where sprsl eq sy-langu

and tcode eq p_tcode.

endform.

----

---

• FORM write_list *

----

---

form write_list.

format color col_positive intensified off.

write:/(19) 'Transaction Code - ',

20(20) p_tcode,

45(50) tstct-ttext.

skip.

if not jtab[] is initial.

write:/(95) sy-uline.

format color col_heading intensified on.

write:/1 sy-vline,

2 'Exit Name',

21 sy-vline ,

22 'Description',

95 sy-vline.

write:/(95) sy-uline.

loop at jtab.

select single * from modsapt

where sprsl = sy-langu and

name = jtab-obj_name.

format color col_normal intensified off.

write:/1 sy-vline,

2 jtab-obj_name hotspot on,

21 sy-vline ,

22 modsapt-modtext,

95 sy-vline.

endloop.

write:/(95) sy-uline.

describe table jtab.

skip.

format color col_total intensified on.

write:/ 'No of Exits:' , sy-tfill.

else.

format color col_negative intensified on.

write:/(95) 'No User Exit exists'.

endif.

endform.

Reward if useful

Regards,

Suruchi

[Former Member]

Hai,

User exits :

1. Introduction

2. How to find user exits

3. Using Project management of SAP Enhancements

1. Introduction:

User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.

The naming standard of function modules for functionmodule exits is:

EXIT_<program name><3 digit suffix>

The call to a functionmodule exit is implemented as:

CALL CUSTOMER.-FUNCTION ❤️ digit suffix>

Example:

The program for transaction VA01 Create salesorder is SAPMV45A

If you search for CALL CUSTOMER-FUNCTION i program

SAPMV45A you will find ( Among other user exits):

CALL CUSTOMER-FUNCTION '003'

exporting

xvbak = vbak

xvbuk = vbuk

xkomk = tkomk

importing

lvf_subrc = lvf_subrc

tables

xvbfa = xvbfa

xvbap = xvbap

xvbup = xvbup.

The exit calls function module EXIT_SAPMV45A_003

2. How to find user exits? Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT

If you know the Exit name, go to transaction CMOD.

Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.

You will now come to a screen that shows the function module exits for the exit.

3. Using Project management of SAP Enhancements, we want to create a project to enahance trasnaction VA01 .

- Go to transaction CMOD

- Create a project called ZVA01

- Choose the Enhancement assign radio button and press the Change button

In the first column enter V45A0002 Predefine sold-to party in sales document.

Note that an enhancement can only be used in 1 project. If the enhancement is already in use, and error message will be displayed

Press Save

Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.

Now the function module is displayed. Double click on include ZXVVAU04 in the function module

Insert the following code into the include: E_KUNNR = '2155'.

Activate the include program. Go back to CMOD and activate the project.

Goto transaction VA01 and craete a salesorder.

Note that Sold-to-party now automatically is "2155"

For More information on Exits,

plz go through the below link...

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

Regards