really dynamic

[Former Member]

there is quite a lot dynamic internal table blogs etc. but those instrcuctions does not help me to build up really dynamic internal table. Examples always point to some structure etc.

Case is: user gives date range in selection screen. Ex. 1.1.2007-20.1.2007.

Program should create internal table with fields for number of days in between those days.

So end result should be like this:

types: begin of lt_date_tab_dynamic_range,

date_1 type syst-datum,

date_2 type syst-datum,

date_nn type syst-datum,

end of lt_date_range.

How this could do via abap?

Thanks.

[Former Member]

sorry Sudheer but your code not solve my problem..

"parameters: p_table(30) type c default 'T001' " this one makes it <b>not</b> dynamic...

It is not dynamic if you give some structure etc to create table.

Sathis, yes i know that if i use generate program (which is only for internal use) i could do this but then hole program have to generate (because i could not import table type back from generated program).

And yes i have read those alv blogs but there is no solution for this or im stupid (which could be of course also true).

t. Reko

[Former Member]

Hi

 type-pools : abap. 
  field-symbols: <dyn_table> type standard table, 
               <dyn_wa>, 
               <dyn_field>. 
  data: dy_table type ref to data, 
      dy_line  type ref to data, 
      xfc type lvc_s_fcat, 
      ifc type lvc_t_fcat. 
  selection-screen begin of block b1 with frame. 
parameters: p_table(30) type c default 'T001'. 
selection-screen end of block b1. 
  start-of-selection. 
    perform get_structure. 
  perform create_dynamic_itab.      **********Creates a dyanamic internal table********** 
  perform get_data. 
  perform write_out. 
  form get_structure. 
  data : idetails type abap_compdescr_tab, 
       xdetails type abap_compdescr. 
  data : ref_table_des type ref to cl_abap_structdescr. 
  * Get the structure of the table. 
  ref_table_des ?=  
      cl_abap_typedescr=>describe_by_name( p_table ). 
  idetails[] = ref_table_des->components[]. 
    loop at idetails into xdetails. 
    clear xfc. 
    xfc-fieldname = xdetails-name . 
    xfc-datatype = xdetails-type_kind. 
    xfc-inttype = xdetails-type_kind. 
    xfc-intlen = xdetails-length. 
    xfc-decimals = xdetails-decimals. 
    append xfc to ifc. 
  endloop. 
  endform. 
  form create_dynamic_itab. 
  * Create dynamic internal table and assign to FS 
  call method cl_alv_table_create=>create_dynamic_table 
               exporting 
                  it_fieldcatalog = ifc 
               importing 
                  ep_table        = dy_table. 
    assign dy_table->* to <dyn_table>. 
  * Create dynamic work area and assign to FS 
  create data dy_line like line of <dyn_table>. 
  assign dy_line->* to <dyn_wa>. 
  endform. 
    
  form get_data. 
  * Select Data from table. 
  select * into table <dyn_table> 
             from (p_table). 
  endform. 
   Write out data from table. 
  loop at <dyn_table> into <dyn_wa>. 
    do. 
      assign component  sy-index   
         of structure <dyn_wa> to <dyn_field>. 
      if sy-subrc <> 0. 
        exit. 
      endif. 
      if sy-index = 1. 
        write:/ <dyn_field>. 
      else. 
        write: <dyn_field>. 
      endif. 
    enddo. 
  endloop.

Regards

Sudheer

[Former Member]

Check the link below. i know u must have already visited this , but this is a good ex where in a loop dyntable is created .

/people/alvaro.tejadagalindo/blog/2006/11/27/dynamic-alv-list-display

[Sathish]

You can do it by generation of code like below:

form gen_cal_date.

ld_source = 'form calculate_date.'.

append ld_source to p_lt_lines.

ld_source = ' DATA: BEGIN OF ls_date Occurs 0,'.

append ld_source to p_lt_lines.

loop at <itab> into <wa_itab>.

ld_counter = ld_counter + 1.

concatenate <field>_ ld_counter' type sy-datum,' into ld_source.

append ld_source to p_lt_lines.

endloop.

ld_source = ' END OF ls_date.'.

append ld_source to p_lt_lines.

ld_source = 'endform.'.

append ld_source to p_lt_lines.

endform.

Hope the above helps. If you need clarifications, do let me know.

[Former Member]

Hi,

Try this code.....................

types: begin of lt_date_tab_dynamic_range,

date_1 type syst-datum,

date_2 type syst-datum,

date_nn type i,

end of lt_date_tab_dynamic_range.

data : itab type table of lt_date_tab_dynamic_range,

wa type lt_date_tab_dynamic_range.

select-options : pa for sy-datum.

data: temp type i.

start-of-selection.

temp = pa-high - pa-low.

wa-date_1 = pa-high.

wa-date_2 = pa-low.

wa-date_nn = temp.

append wa to itab.

loop at itab into wa.

write : wa-date_1, wa-date_2, wa-date_nn.

endloop.

Regards

Purshoth

[Former Member]

sorry Sudheer but your code not solve my problem..

"parameters: p_table(30) type c default 'T001' " this one makes it <b>not</b> dynamic...

It is not dynamic if you give some structure etc to create table.

Sathis, yes i know that if i use generate program (which is only for internal use) i could do this but then hole program have to generate (because i could not import table type back from generated program).

And yes i have read those alv blogs but there is no solution for this or im stupid (which could be of course also true).

t. Reko

[Former Member]

Hi Reko,

I took the code from Rich Heilmans' blog.

Actually the table is created but i didn't populate it with data.

select-options : s_1 FOR SY-DATUM.


data : lv_i(3) type c,
       xfc type lvc_s_fcat,
      ifc type lvc_t_fcat.
data : lv_datum(2).
data: dy_table type ref to data.

lv_i = s_1-high - s_1-low.

do lv_i times.
lv_datum = lv_datum + 1 .
perform create_fieldcat using lv_datum.
enddo.

call method cl_alv_table_create=>create_dynamic_table
               exporting
                  it_fieldcatalog = ifc
               importing
                  ep_table        = dy_table.



*&---------------------------------------------------------------------*
*&      Form  create_fieldcat
*&---------------------------------------------------------------------*
form create_fieldcat using pindex.
data : lv_day(7) .


concatenate 'DATE_' pindex into lv_day.
    xfc-fieldname =  lv_day.
    xfc-datatype  = 'DATS'.
    xfc-OUTPUTLEN   = '10'.

    append xfc to ifc.

endform.                    " create_fieldcat

Hope this helps

Regards.

[Former Member]

Finally looks good! So i was stupid

Thanks Caglar!

reko

[Former Member]

and to put data into table:

field-symbols: <lt_destination> type standard table.

field-symbols: <fs> type any,

<ls_wa_to>,

<fs_field> type any.

data: ls_destination type ref to data.

data: lv_field type bdcdata-fnam.

assign dy_table->* to <lt_destination>.

create data ls_destination like line of <lt_destination>.

assign ls_destination->* to <ls_wa_to>.

clear lv_datum.

do lv_i times.

lv_datum = lv_datum + 1 .

concatenate '<ls_wa_to>-' 'DATE_' lv_datum into lv_field.

assign (lv_field) to <fs_field>.

• some data -->

<fs_field> = sy-datum.

append <ls_wa_to> to <lt_destination>.

free <ls_wa_to>.

enddo.