Process on value-request: filling dynpro before Enter

[Former Member]

Hello,

I have a problem with a dynpro:

I fill in a value into field "zmepo_badi_9000-ateil" with the help of:

PROCESS ON VALUE-REQUEST.
   FIELD zmepo_badi_9000-ateil
         MODULE suchhilfe_ateil. (the complete dynpro implementation see below: "Module  SUCHHILFE_ATEIL  INPUT")

I get a value into the field zmepo_badi_9000-ateil (F4 help with FB 'F4IF_INT_TABLE_VALUE_REQUEST')  immediatly!! That works.

But in "MODULE suchhilfe_ateil" I also want to fill in a value into field zmepo_badi_9000-z_zielpreis (bold text below).

That works only after pushing ENTER (I think that`s PAI). But I would like that the value of zmepo_badi_9000-z_zielpreis appears immediatly (similar to zmepo_badi_9000-ateil). Is that possible? I hope anybody can help me. Thank you.

*----------------------------------------------------------------------*
***INCLUDE LZMEPOBADIEXI02 .
*----------------------------------------------------------------------*
*&---------------------------------------------------------------------*
*&      Module  SUCHHILFE_ATEIL  INPUT
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
MODULE suchhilfe_ateil INPUT.
   DATA: ls_ekko TYPE ekko,
         lv_netwr_eur(16)               TYPE p DECIMALS 2.

   CLEAR ls_ekko.
   TYPES: BEGIN OF t_ateil,
           ateil   TYPE zco_pc4a-ateil,
           pspnr   TYPE zco_pc4a-pspnr,
           kstar   TYPE zco_pc4a-kstar,
           menge   TYPE zco_pc4a-menge,
           wertz   TYPE zco_pc4a-wertz,
           ktext   TYPE zco_pc4a_text-ktext,
           ltext   TYPE zco_pc4a_text-ltext,
           waers   TYPE zco_pc4a-waers,
           END OF t_ateil.
   DATA: ateil TYPE zco_pc4a-ateil.
   CLEAR ateil.
   DATA: it_return    TYPE ddshretval OCCURS 10.
   DATA: it_return2    TYPE ddshretval OCCURS 10.

   DATA: ls_return    TYPE ddshretval.
   DATA: ls_ateil TYPE t_ateil,
         it_ateil TYPE STANDARD TABLE OF t_ateil.
   DATA: BEGIN OF dynpfields OCCURS 0. "Hilfsstruktur zum auslesen des akt.
           INCLUDE STRUCTURE dynpread. "Feldwertes vom Dynpro bei >F4<
   DATA: END OF   dynpfields.

   REFRESH it_ateil.  REFRESH it_return. CLEAR ls_return.

******************************************************
* --> Selektion der A-Teile anhand des PSP-Elements
******************************************************
   SELECT * FROM zco_pc4a INTO CORRESPONDING FIELDS OF ls_ateil
     WHERE pspnr = zmepo_badi_9000-z_pspnr.
     APPEND ls_ateil TO it_ateil.
   ENDSELECT.


   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
     EXPORTING
*   DDIC_STRUCTURE         = ' '
     retfield               = 'ATEIL'
*   PVALKEY                = ' '
*    dynpprog               = sy-repid
*    dynpnr                 = sy-dynnr
*   DYNPROFIELD            = ' '
*    window_title           = text-001
*   VALUE                  = ' '
     value_org              = 'S'
*   MULTIPLE_CHOICE        = ' '
*   DISPLAY                = ' '
*   CALLBACK_PROGRAM       = ' '
*   CALLBACK_FORM          = ' '
*   CALLBACK_METHOD        =
*   MARK_TAB               =
* IMPORTING
*   USER_RESET             =
     TABLES
       value_tab            = it_ateil
       return_tab           = it_return
*   DYNPFLD_MAPPING        =
* EXCEPTIONS
*   PARAMETER_ERROR        = 1
*   NO_VALUES_FOUND        = 2
*   OTHERS                 = 3
.

   LOOP AT it_return  INTO ls_return.
     zmepo_badi_9000-ateil   = ls_return-fieldval.
     zmepo_badi_9000-z_kstar = ls_ateil-kstar.
     zmepo_badi_9000-z_wertz = ls_ateil-wertz.
     IF ls_ateil-wertz IS NOT INITIAL.
       IF zmepo_badi_9000-z_zielpreis IS INITIAL.

         IF  ls_ateil-waers NE 'EUR' AND ls_ateil-waers IS NOT INITIAL .
           SELECT SINGLE * FROM ekko INTO ls_ekko WHERE ebeln = zmepo_badi_9000-z_ebeln.
*             WAE umrechnen in EUR
           CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
             EXPORTING
               date             = ls_ekko-bedat
               foreign_amount   = '23' "ls_ekko-wertz
               foreign_currency = ls_ekko-waers
               local_currency   = 'EUR'
               rate             = ls_ekko-wkurs
             IMPORTING
               local_amount     = lv_netwr_eur
             EXCEPTIONS
               no_rate_found    = 1
               overflow         = 2
               no_factors_found = 3
               no_spread_found  = 4
               derived_2_times  = 5
               OTHERS           = 6.
           if sy-subrc = 0.
             zmepo_badi_9000-z_wertz = lv_netwr_eur.
            zmepo_badi_9000-z_zielpreis = zmepo_badi_9000-z_wertz.
             modify SCREEN.
           endif.
         ENDIF.
        ENDIF.
     ENDIF.

     EXIT.
   ENDLOOP.
  ENDMODULE.                 " SUCHHILFE_ATEIL  INPUT

PROCESS BEFORE OUTPUT.

   MODULE event_pbo.

   MODULE screen_9000.

PROCESS AFTER INPUT.

   FIELD zmepo_badi_9000-z_zielpreis
     MODULE daten_pruefen_9000_zp ON REQUEST.

   FIELD zmepo_badi_9000-z_bestang
     MODULE daten_pruefen_9000_ba ON REQUEST.

   FIELD zmepo_badi_9000-z_altpreis
     MODULE daten_pruefen_9000_ap ON REQUEST.
*  MODULE zielpreis.

   MODULE event_pai.


PROCESS ON VALUE-REQUEST.
   FIELD zmepo_badi_9000-ateil
         MODULE suchhilfe_ateil.

[Former Member]

Hello, thank you it works with

CALL FUNCTION 'SAPGUI_SET_FUNCTIONCODE'

     EXPORTING

       functioncode           = '/00'

     EXCEPTIONS

       function_not_supported = 1.

But I have another problem:

I select data with:

   SELECT * FROM zco_pc4a INTO CORRESPONDING FIELDS OF ls_ateil
     WHERE pspnr = zmepo_badi_9000-z_pspnr.
     APPEND ls_ateil TO it_ateil.
   ENDSELECT.

With F4IF_INT_TABLE_VALUE_REQUEST I get the value of ATEIL back (selection of an internal table).

That works. But I want to have to get back more than one field  of F4IF_INT_TABLE_VALUE_REQUEST.

At the moment I get the value of ATEIL, but I also want to get the value of  KSTAR.

Can you please tell me how to get the value of KSTAR.

Thank you very much.

[Arun_Prabhu_K]

Hello Kevin.

Refer this thread http://scn.sap.com/thread/3224916.

Regards.

[Former Member]

Hi Kevin,

Please try the function module 'DYNP_VALUES_UPDATE'. See the sample code below.

TYPES:
BEGIN OF l_x_names,
  uname TYPE uname,
END OF l_x_names.

DATA:
l_i_names TYPE STANDARD TABLE OF l_x_names INITIAL SIZE 0,
l_wa_names TYPE l_x_names,
l_i_field_tab TYPE STANDARD TABLE OF dfies INITIAL SIZE 0,
l_i_return_tab TYPE STANDARD TABLE OF ddshretval INITIAL SIZE 0,
l_wa_return_tab TYPE ddshretval,
l_i_dynpfld_mapping TYPE STANDARD TABLE OF dselc INITIAL SIZE 0.

l_wa_names-uname = 'TEST1'.
APPEND l_wa_names TO l_i_names.
l_wa_names-uname = 'TEST2'.
APPEND l_wa_names TO l_i_names.
l_wa_names-uname = 'TEST3'.
APPEND l_wa_names TO l_i_names.
l_wa_names-uname = 'TEST4'.
APPEND l_wa_names TO l_i_names.


CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
  EXPORTING
    retfield        = 'UNAME'
    dynpprog        = sy-repid
    dynpnr          = sy-dynnr
    dynprofield     = p_retfield
    value_org       = 'S'
  TABLES
    value_tab       = l_i_names
    field_tab       = l_i_field_tab
    return_tab      = l_i_return_tab
    dynpfld_mapping = l_i_dynpfld_mapping
  EXCEPTIONS
    parameter_error = 1
    no_values_found = 2
    OTHERS          = 3.
IF sy-subrc = 0.
  READ TABLE l_i_return_tab INTO l_wa_return_tab INDEX 1.
  p_name = l_wa_return_tab-fieldval.
ELSE.
  MESSAGE e001(00) WITH 'Error while displaying F4 help'.
ENDIF.

DATA: l_i_dynpfields  TYPE STANDARD TABLE OF dynpread INITIAL SIZE 0,
      l_wa_dynpfields TYPE dynpread.
IF p_name = 'TEST1'.
  l_wa_dynpfields-fieldname = 'P_CTRY'.
  l_wa_dynpfields-fieldvalue = 'IN'.
  APPEND l_wa_dynpfields TO l_i_dynpfields.
ELSE.
  l_wa_dynpfields-fieldname = 'P_CTRY'.
  CLEAR l_wa_dynpfields-fieldvalue.
  APPEND l_wa_dynpfields TO l_i_dynpfields.
ENDIF.

CALL FUNCTION 'DYNP_VALUES_UPDATE'
  EXPORTING
    dyname               = sy-repid
    dynumb               = sy-dynnr
  TABLES
    dynpfields           = l_i_dynpfields
  EXCEPTIONS
    invalid_abapworkarea = 1
    invalid_dynprofield  = 2
    invalid_dynproname   = 3
    invalid_dynpronummer = 4
    invalid_request      = 5
    no_fielddescription  = 6
    undefind_error       = 7
    OTHERS               = 8.
IF sy-subrc <> 0.
  MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

Thanks and Regards,

Abyson Joseph

Applexus Technologies.

[Former Member]

Hi Kevin,

Another shortcut way is to simulate the 'Enter'. Without reading or updating screen values, you can simulate and enter pressed to trigger the PAI automatically...easy money

CALL FUNCTION 'SAPGUI_SET_FUNCTIONCODE'

     EXPORTING

       functioncode           = '/00'

     EXCEPTIONS

       function_not_supported = 1.

Thanks and Regards,

Abyson Joseph

[Former Member]

HI,

Use DYNP_VALUES_READ function module for Particular field.

This will resolve your issue.

check this sample program.

parameters: p_vbeln type vbak-vbeln,

             p_posnr type vbap-posnr.

at selection-screen on value-request for p_posnr.

   data: begin of help_item occurs 0,

           posnr type vbap-posnr,

           matnr type vbap-matnr,

           arktx type vbap-arktx,

         end of help_item.

   data: dynfields type table of dynpread with header line.

   dynfields-fieldname = 'P_VBELN'.

   append dynfields.

   call function 'DYNP_VALUES_READ'

        exporting

             dyname               = sy-cprog

             dynumb               = sy-dynnr

             translate_to_upper   = 'X'

        tables

             dynpfields           = dynfields

        exceptions

             invalid_abapworkarea = 1

             invalid_dynprofield  = 2

             invalid_dynproname   = 3

             invalid_dynpronummer = 4

             invalid_request      = 5

             no_fielddescription  = 6

             invalid_parameter    = 7

             undefind_error       = 8

             double_conversion    = 9

             stepl_not_found      = 10

             others               = 11.

   read table dynfields with key fieldname = 'P_VBELN'.

   p_vbeln = dynfields-fieldvalue.

   call function 'CONVERSION_EXIT_ALPHA_INPUT'

        exporting

             input  = p_vbeln

        importing

             output = p_vbeln.

   select posnr matnr arktx into table help_item

                  from vbap

                       where vbeln = p_vbeln.

   call function 'F4IF_INT_TABLE_VALUE_REQUEST'

        exporting

             retfield    = 'POSNR'

             dynprofield = 'P_POSNR'

             dynpprog    = sy-cprog

             dynpnr      = sy-dynnr

             value_org   = 'S'

        tables

             value_tab   = help_item.

Regards,

Ravi Pratap Singh

Message was edited by: Ravi Singh

[sandeep_ramesh88]

Hi Kevin,

The return table in the FM "F4IF_INT_TABLE_VALUE_REQUEST" will solve your problem.

Thank You.

[Former Member]

Hello, thank you it works with

CALL FUNCTION 'SAPGUI_SET_FUNCTIONCODE'

     EXPORTING

       functioncode           = '/00'

     EXCEPTIONS

       function_not_supported = 1.

But I have another problem:

I select data with:

   SELECT * FROM zco_pc4a INTO CORRESPONDING FIELDS OF ls_ateil
     WHERE pspnr = zmepo_badi_9000-z_pspnr.
     APPEND ls_ateil TO it_ateil.
   ENDSELECT.

With F4IF_INT_TABLE_VALUE_REQUEST I get the value of ATEIL back (selection of an internal table).

That works. But I want to have to get back more than one field  of F4IF_INT_TABLE_VALUE_REQUEST.

At the moment I get the value of ATEIL, but I also want to get the value of  KSTAR.

Can you please tell me how to get the value of KSTAR.

Thank you very much.

[Former Member]

I found the solution:

In FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
I have to use

    callback_form          = 'F4CALLBACK'.

I have implemented the Form:

FORM f4callback
      TABLES   record_tab STRUCTURE seahlpres
      CHANGING shlp TYPE shlp_descr
               callcontrol LIKE ddshf4ctrl.
    DATA: interface LIKE LINE OF shlp-interface.
    CLEAR interface.
*  INTERFACE-VALTABNAME = 'ZMEPO_BADI_9000'.
*  INTERFACE-VALFIELD = 'Z_KSTAR'.
    interface-shlpfield = 'F0003'.
    interface-valtabname = space.
    interface-valfield = '~'.
*   MODIFY shlp-interface FROM interface
*          TRANSPORTING valtabname valfield
*          WHERE shlpfield = 'F0003'.
    APPEND interface TO shlp-interface.
  ENDFORM.                    "F4CALLBACK

[RaymondGiuseppi]

Using search tool you could have found my similar answer in How can I restrict the entries found in a selection screen?

Regards,

Raymond