Problem in BAPI_SALESORDER_CHANGE for condition value

[Former Member]

Dear expert ,

   i have requirement like to insert a condition type in va02 line item level .for that i am using BAPI BAPI_SALESORDER_CHANGE .but

my problem is whenever i am executing report instead for condition value  net value is getting change . i have try lot of possibility but issue didn't soled .

i have written below code for testing . please let me know if you have any solutions , thanks in advance 

   DATA  order_header_in  TYPE STANDARD TABLE OF  bapisdh1 WITH HEADER LINE.

   DATA it_return TYPE STANDARD TABLE OF  bapiret2 WITH HEADER LINE.

   DATA header_inx TYPE STANDARD TABLE OF bapisdh1x WITH HEADER LINE.

   DATA conditions_in  TYPE STANDARD TABLE OF  bapicond WITH HEADER LINE.

   DATA conditions_inx TYPE STANDARD TABLE OF  bapicondx WITH HEADER LINE.

   DATA SALESDOCUMENT  LIKE  BAPIVBELN-VBELN.

   LOOP AT it_final INTO wa_final WHERE chk = 'X'.

     header_inx = 'U'.

     APPEND header_inx .

     conditions_in-itm_number = '000010'."wa_final-posnr.

     conditions_in-cond_type = 'ZAPD'.

     conditions_in-cond_value =  '50789.00'." wa_final-netwr.

*    conditions_in-COND_ST_NO = '480'.

*    conditions_in-ROUNDOFFDI = wa_final-netwr.

*    conditions_in-CONDVALUE = wa_final-netwr.

     conditions_in-currency = 'INR'.

     conditions_in-curr_iso = 'INR'.

     APPEND conditions_in.

     conditions_inx-itm_number = wa_final-posnr.

     conditions_inx-cond_type = 'ZAPD'.

     conditions_inx-updateflag = 'U'.

     conditions_inx-cond_value = 'X'.

     conditions_inx-currency = 'X'.

*    conditions_inx-COND_P_UNT = 'X'.

     APPEND conditions_inx.

SALESDOCUMENT = '1311000598'.

     CALL FUNCTION 'BAPI_SALESORDER_CHANGE'

       EXPORTING

         salesdocument               = SALESDOCUMENT

*     ORDER_HEADER_IN             =

       order_header_inx            =  header_inx

       TABLES

         return                      = it_return

      CONDITIONS_IN               = conditions_in

      CONDITIONS_INX              = conditions_inx

               .

     CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

          EXPORTING

               WAIT   = 'X'

          IMPORTING

               RETURN = it_return.

   ENDLOOP.

[Former Member]

Dear expert ,

   i have requirement like to insert a condition type in va02 line item level .for that i am using BAPI BAPI_SALESORDER_CHANGE .but

my problem is whenever i am executing report instead for condition value  net value is getting change . i have try lot of possibility but issue didn't soled .

i have written below code for testing . please let me know if you have any solutions , thanks in advance 

   DATA  order_header_in  TYPE STANDARD TABLE OF  bapisdh1 WITH HEADER LINE.

   DATA it_return TYPE STANDARD TABLE OF  bapiret2 WITH HEADER LINE.

   DATA header_inx TYPE STANDARD TABLE OF bapisdh1x WITH HEADER LINE.

   DATA conditions_in  TYPE STANDARD TABLE OF  bapicond WITH HEADER LINE.

   DATA conditions_inx TYPE STANDARD TABLE OF  bapicondx WITH HEADER LINE.

   DATA SALESDOCUMENT  LIKE  BAPIVBELN-VBELN.

   LOOP AT it_final INTO wa_final WHERE chk = 'X'.

     header_inx = 'U'.

     APPEND header_inx .

     conditions_in-itm_number = '000010'."wa_final-posnr.

     conditions_in-cond_type = 'ZAPD'.

     conditions_in-cond_value =  '50789.00'." wa_final-netwr.

*    conditions_in-COND_ST_NO = '480'.

*    conditions_in-ROUNDOFFDI = wa_final-netwr.

*    conditions_in-CONDVALUE = wa_final-netwr.

     conditions_in-currency = 'INR'.

     conditions_in-curr_iso = 'INR'.

     APPEND conditions_in.

     conditions_inx-itm_number = wa_final-posnr.

     conditions_inx-cond_type = 'ZAPD'.

     conditions_inx-updateflag = 'U'.

     conditions_inx-cond_value = 'X'.

     conditions_inx-currency = 'X'.

*    conditions_inx-COND_P_UNT = 'X'.

     APPEND conditions_inx.

SALESDOCUMENT = '1311000598'.

     CALL FUNCTION 'BAPI_SALESORDER_CHANGE'

       EXPORTING

         salesdocument               = SALESDOCUMENT

*     ORDER_HEADER_IN             =

       order_header_inx            =  header_inx

       TABLES

         return                      = it_return

      CONDITIONS_IN               = conditions_in

      CONDITIONS_INX              = conditions_inx

               .

     CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

          EXPORTING

               WAIT   = 'X'

          IMPORTING

               RETURN = it_return.

   ENDLOOP.

[guilherme_frisoni]

I didn't understand exactly your requirement, but when setting up new conditions, you can fill LOGIC_SWITCH structure in BAPI to recalculate prices.

In LOGIC_SWITCH-PRICING, try to pass the value corresponding to the button Update in VA02.

Regards,

Frisoni

[Former Member]

i want change condtion value not Net value , but Net value is getting changed.

please help

[Former Member]

i want to change condition value but net value is getting change .

[guilherme_frisoni]

Your condition is %, so, you set the percent amount and condition value is calculated based on it.

If you want a specific value in condition value column, you can calculate how much percent of item value you need to achieve condition value.

for example:

     conditions_in-cond_value =  '50789.00' / wa_final-netwr.

Regards,

Frisoni

[Former Member]

Someone please help..

[prad_k]

Pass LOGIC_SWITCH to BAPI  

data logic_switch  like  bapisdls   occurs 0 with header line.   

    logic_switch-pricing           =  'C'.

    logic_switch-cond_handl    =  'X'.

[Former Member]

Thanks for replyi applied logic as you suggest  but after  nothing is getting change .

'No data was changed' - message is coming in return parameter ,

[Former Member]

As per my requirement it is not possible ...

[Former Member]

Anything i am missing ?

[prad_k]

Go through the below links, might be helpful

[Former Member]

Already applied all these thinks but not working

[Former Member]

Hi Debesh,

Pass following values

COND_COUNT values also in CONDITIONS_IN and CONDITIONS_INX structure

Pass Cond_ST_NO values too in both structure.

conditions_in-COND_ST_NO = '480'.

Add this line too conditions_inx-curr_iso = 'X'.

Hope it helps

Regards,

Kannan

[Former Member]

Dear Kannan ,

      i tried but not working .

[Former Member]

Dear Expert ,

            i tried all  your suggestion , but still this issue is not closed .

thank u  for valuable suggestion . please reply if any solution u got .

[Former Member]

Hi Debash,

Try to use BAPI_SALESORDER_CREATEFROMDAT2 for condtion value pricing change.

Regards,

Kannan

[Former Member]

Same result coming .

[Former Member]

hi,

write code in this routine to change in condition value RV64A982

it wil change automatically for creating r changing so

  DATA : lw_fld TYPE char8 VALUE 'RETTKOMV' .

  FIELD-SYMBOLS : <lfs_fld> .

  ASSIGN (lw_fld) TO <lfs_fld> .

IF komk-kalsm = 'ZCRDST'.

    IF xkomv-kschl = 'ZICC'.

      IF <lfs_xkomv_tm_sample> IS ASSIGNED.

        UNASSIGN <lfs_xkomv_tm_sample> .

      ENDIF.


      CLEAR:lw_kwert,lw_kbetr,lw_kwert_zstz,lw_kwert_zsty,lw_kbetr_zict,lw_kwert_zict,lw_kbetr_zilt,lw_kwert_zilt,lw_kbetr_zivt,lw_kwert_zivt,

            lw_kbetr_ziab,lw_kwert_ziab .


      LOOP AT xkomv  ASSIGNING <lfs_xkomv_tm_sample>.

        CASE <lfs_xkomv_tm_sample>-kschl .

          WHEN 'ZICT' .

            lw_kbetr_zict  = <lfs_xkomv_tm_sample>-kbetr .

            lw_kwert_zict  = <lfs_xkomv_tm_sample>-kwert.


          WHEN 'ZILT'.

            lw_kbetr_zilt  = <lfs_xkomv_tm_sample>-kbetr .

            lw_kwert_zilt  = <lfs_xkomv_tm_sample>-kwert.


          WHEN 'ZIVT'.

            lw_kbetr_zivt  = <lfs_xkomv_tm_sample>-kbetr .

            lw_kwert_zivt  = <lfs_xkomv_tm_sample>-kwert.


          WHEN 'ZIAB' .

            lw_kbetr_ziab  = <lfs_xkomv_tm_sample>-kbetr .

            lw_kwert_ziab  = <lfs_xkomv_tm_sample>-kwert.

          WHEN OTHERS.

        ENDCASE.

      ENDLOOP.

      UNASSIGN <lfs_xkomv_tm_sample> .

      LOOP AT xkomv  ASSIGNING <lfs_xkomv_tm_sample>.

        CASE <lfs_xkomv_tm_sample>-kschl .

          WHEN 'ZICR' .

            IF lw_kbetr_zict IS NOT INITIAL.



              CALL FUNCTION 'Z_PTC_CAL_982'

                EXPORTING

                  i_kbetr    = lw_kbetr_zict

                  kbetr_base = <lfs_xkomv_tm_sample>-kbetr

                IMPORTING

                  kbetr      = lw_kbetr_zict.



*            lw_kbetr_zict  = lw_kbetr_zict + ( ( lw_kbetr_zict * ( <lfs_xkomv_tm_sample>-kbetr / 10 ) ) / 100 ).

              lw_kwert_zict  = lw_kwert_zict + <lfs_xkomv_tm_sample>-kwert.

            ENDIF.

          WHEN 'ZILR'.

            IF lw_kbetr_zilt IS NOT INITIAL.



              CALL FUNCTION 'Z_PTC_CAL_982'

                EXPORTING

                  i_kbetr    = lw_kbetr_zilt

                  kbetr_base = <lfs_xkomv_tm_sample>-kbetr

                IMPORTING

                  kbetr      = lw_kbetr_zilt.



*              lw_kbetr_zilt  = lw_kbetr_zilt + ( ( lw_kbetr_zilt * ( <lfs_xkomv_tm_sample>-kbetr / 10 ) ) / 100 ).

              lw_kwert_zilt  = lw_kwert_zilt + <lfs_xkomv_tm_sample>-kwert.

            ENDIF.


          WHEN 'ZIVC'.

            IF lw_kbetr_zivt IS NOT INITIAL.


              CALL FUNCTION 'Z_PTC_CAL_982'

                EXPORTING

                  i_kbetr    = lw_kbetr_zivt

                  kbetr_base = <lfs_xkomv_tm_sample>-kbetr

                IMPORTING

                  kbetr      = lw_kbetr_zivt.



*              lw_kbetr_zivt  = lw_kbetr_zivt + ( ( lw_kbetr_zivt * ( <lfs_xkomv_tm_sample>-kbetr / 10 ) ) / 100 ).

              lw_kwert_zivt  = lw_kwert_zivt + <lfs_xkomv_tm_sample>-kwert.

            ENDIF.

          WHEN OTHERS.

        ENDCASE.

      ENDLOOP.

      lw_kwert = lw_kwert_zict + lw_kwert_zilt + lw_kwert_zivt + lw_kwert_ziab .

      lw_kbetr = lw_kbetr_zict + lw_kbetr_zilt + lw_kbetr_zivt + lw_kbetr_ziab .

      xkwert = lw_kwert .

      xkomv-kwert = xkwert.

      xkomv-kbetr = lw_kbetr.

      <lfs_fld> = xkomv .