Outbound process code for MBGMCR02

[Former Member]

Hello Experts:

I need to send out material movement (document) information using IDOC. I found MBGMCR02 is a suitable one but the process code is inbound.

I read some thread, it said you can create a new outbound process code. But I don't know exactly how to do it.

Can anyone share some advice?

Thanks a lot.

Dennis

[Former Member]

Hi Dennis,

To solve this problem create the outbound process code using the following method:

Goto txn WE41 : Create a new outbound process code say ZMMGRO and assign your message type MBGMCR to this.

Also maintain a FM say ZMBGMCR_IDOC_OUPUT which process the IDOC in the outbound side.

The FM signature should typically look like this:

""Local Interface:

*" IMPORTING

*" VALUE(OBJECT) LIKE NAST STRUCTURE NAST

*" VALUE(CONTROL_RECORD_IN) LIKE EDIDC STRUCTURE EDIDC

*" EXPORTING

*" VALUE(OBJECT_TYPE) LIKE WFAS1-ASGTP

*" VALUE(CONTROL_RECORD_OUT) LIKE EDIDC STRUCTURE EDIDC

*" TABLES

*" INT_EDIDD STRUCTURE EDIDD

*" EXCEPTIONS

*" ERROR_MESSAGE_RECEIVED

*" DATA_NOT_RELEVANT_FOR_SENDING

*"----

---

TABLES: MKPF, MSEG.

data wa_mkpf type MKPF.

data it_mseg type TABLE OF MSEG.

data wa_mseg like LINE OF it_mseg.

data wa_E1BP2017_GM_HEAD_01 type E1BP2017_GM_HEAD_01.

data wa_E1MBGMCR type E1MBGMCR .

data wa_E1BP2017_GM_ITEM_CREATE type E1BP2017_GM_ITEM_CREATE.

data wa_E1BP2017_GM_CODE type E1BP2017_GM_CODE.

data wa_E1BP2017_GM_ITEM_CREATE1 type E1BP2017_GM_ITEM_CREATE1.

data wa_E1BP2017_GM_SERIALNUMBER type E1BP2017_GM_SERIALNUMBER.

data wa_edidd type edidd.

******************************************

• Create Control Record **********

move CONTROL_RECORD_IN to CONTROL_RECORD_OUT.

control_record_out-direct = '1'.

control_record_out-serial = sy-datum.

control_record_out-serial+8 = sy-uzeit.

*******************************************

• Fill Segment data from MKPF & MSEG ******

clear wa_edidd.

clear wa_E1MBGMCR.

move wa_E1MBGMCR to wa_edidd-sdata.

wa_edidd-segnam = 'E1MBGMCR'.

append wa_edidd to int_edidd.

Select single * from MKPF into wa_mkpf where

mblnr eq OBJECT-OBJKY+0(10)

and mjahr eq OBJECT-OBJKY+10(4).

clear wa_edidd.

clear wa_E1BP2017_GM_HEAD_01.

wa_E1BP2017_GM_HEAD_01-PSTNG_DATE = wa_mkpf-BUDAT.

wa_E1BP2017_GM_HEAD_01-DOC_DATE = wa_mkpf-BLDAT.

wa_E1BP2017_GM_HEAD_01-BILL_OF_LADING = wa_mkpf-FRBNR.

wa_E1BP2017_GM_HEAD_01-PR_UNAME = wa_mkpf-USNAM.

wa_E1BP2017_GM_HEAD_01-HEADER_TXT = wa_mkpf-BKTXT.

move wa_E1BP2017_GM_HEAD_01 to wa_edidd-sdata.

wa_edidd-segnam = 'E1BP2017_GM_HEAD_01'.

append wa_edidd to int_edidd.

SELECT * from mseg INTO TABLE it_mseg where

mblnr eq OBJECT-OBJKY+0(10)

and mjahr eq OBJECT-OBJKY+10(4).

loop at it_mseg into wa_mseg.

CLEAR wa_edidd.

CLEAR wa_E1BP2017_GM_ITEM_CREATE.

wa_E1BP2017_GM_ITEM_CREATE-MATERIAL = wa_mseg-MATNR.

wa_E1BP2017_GM_ITEM_CREATE-PLANT = wa_mseg-WERKS.

wa_E1BP2017_GM_ITEM_CREATE-STGE_LOC = wa_mseg-LGORT.

wa_E1BP2017_GM_ITEM_CREATE-BATCH = wa_mseg-CHARG.

wa_E1BP2017_GM_ITEM_CREATE-MOVE_TYPE = wa_mseg-BWART.

wa_E1BP2017_GM_ITEM_CREATE-STCK_TYPE = wa_mseg-INSMK.

wa_E1BP2017_GM_ITEM_CREATE-SPEC_STOCK = wa_mseg-SOBKZ.

wa_E1BP2017_GM_ITEM_CREATE-VENDOR = wa_mseg-LIFNR.

wa_E1BP2017_GM_ITEM_CREATE-ENTRY_QNT = wa_mseg-MENGE.

wa_E1BP2017_GM_ITEM_CREATE-ENTRY_UOM = wa_mseg-ERFME.

wa_E1BP2017_GM_ITEM_CREATE-PO_NUMBER = wa_mseg-EBELN.

wa_E1BP2017_GM_ITEM_CREATE-PO_ITEM = wa_mseg-EBELP.

move wa_E1BP2017_GM_ITEM_CREATE to wa_edidd-sdata.

wa_edidd-segnam = 'E1BP2017_GM_ITEM_CREATE'.

append wa_edidd to int_edidd.

endloop.

****************************************************

ENDFUNCTION.

Do remember to maintain the message control in WE20 where you maintain this outbound code against your output type.

Hope this helps!

[Former Member]

Hi Dennis,

To solve this problem create the outbound process code using the following method:

Goto txn WE41 : Create a new outbound process code say ZMMGRO and assign your message type MBGMCR to this.

Also maintain a FM say ZMBGMCR_IDOC_OUPUT which process the IDOC in the outbound side.

The FM signature should typically look like this:

""Local Interface:

*" IMPORTING

*" VALUE(OBJECT) LIKE NAST STRUCTURE NAST

*" VALUE(CONTROL_RECORD_IN) LIKE EDIDC STRUCTURE EDIDC

*" EXPORTING

*" VALUE(OBJECT_TYPE) LIKE WFAS1-ASGTP

*" VALUE(CONTROL_RECORD_OUT) LIKE EDIDC STRUCTURE EDIDC

*" TABLES

*" INT_EDIDD STRUCTURE EDIDD

*" EXCEPTIONS

*" ERROR_MESSAGE_RECEIVED

*" DATA_NOT_RELEVANT_FOR_SENDING

*"----

---

TABLES: MKPF, MSEG.

data wa_mkpf type MKPF.

data it_mseg type TABLE OF MSEG.

data wa_mseg like LINE OF it_mseg.

data wa_E1BP2017_GM_HEAD_01 type E1BP2017_GM_HEAD_01.

data wa_E1MBGMCR type E1MBGMCR .

data wa_E1BP2017_GM_ITEM_CREATE type E1BP2017_GM_ITEM_CREATE.

data wa_E1BP2017_GM_CODE type E1BP2017_GM_CODE.

data wa_E1BP2017_GM_ITEM_CREATE1 type E1BP2017_GM_ITEM_CREATE1.

data wa_E1BP2017_GM_SERIALNUMBER type E1BP2017_GM_SERIALNUMBER.

data wa_edidd type edidd.

******************************************

• Create Control Record **********

move CONTROL_RECORD_IN to CONTROL_RECORD_OUT.

control_record_out-direct = '1'.

control_record_out-serial = sy-datum.

control_record_out-serial+8 = sy-uzeit.

*******************************************

• Fill Segment data from MKPF & MSEG ******

clear wa_edidd.

clear wa_E1MBGMCR.

move wa_E1MBGMCR to wa_edidd-sdata.

wa_edidd-segnam = 'E1MBGMCR'.

append wa_edidd to int_edidd.

Select single * from MKPF into wa_mkpf where

mblnr eq OBJECT-OBJKY+0(10)

and mjahr eq OBJECT-OBJKY+10(4).

clear wa_edidd.

clear wa_E1BP2017_GM_HEAD_01.

wa_E1BP2017_GM_HEAD_01-PSTNG_DATE = wa_mkpf-BUDAT.

wa_E1BP2017_GM_HEAD_01-DOC_DATE = wa_mkpf-BLDAT.

wa_E1BP2017_GM_HEAD_01-BILL_OF_LADING = wa_mkpf-FRBNR.

wa_E1BP2017_GM_HEAD_01-PR_UNAME = wa_mkpf-USNAM.

wa_E1BP2017_GM_HEAD_01-HEADER_TXT = wa_mkpf-BKTXT.

move wa_E1BP2017_GM_HEAD_01 to wa_edidd-sdata.

wa_edidd-segnam = 'E1BP2017_GM_HEAD_01'.

append wa_edidd to int_edidd.

SELECT * from mseg INTO TABLE it_mseg where

mblnr eq OBJECT-OBJKY+0(10)

and mjahr eq OBJECT-OBJKY+10(4).

loop at it_mseg into wa_mseg.

CLEAR wa_edidd.

CLEAR wa_E1BP2017_GM_ITEM_CREATE.

wa_E1BP2017_GM_ITEM_CREATE-MATERIAL = wa_mseg-MATNR.

wa_E1BP2017_GM_ITEM_CREATE-PLANT = wa_mseg-WERKS.

wa_E1BP2017_GM_ITEM_CREATE-STGE_LOC = wa_mseg-LGORT.

wa_E1BP2017_GM_ITEM_CREATE-BATCH = wa_mseg-CHARG.

wa_E1BP2017_GM_ITEM_CREATE-MOVE_TYPE = wa_mseg-BWART.

wa_E1BP2017_GM_ITEM_CREATE-STCK_TYPE = wa_mseg-INSMK.

wa_E1BP2017_GM_ITEM_CREATE-SPEC_STOCK = wa_mseg-SOBKZ.

wa_E1BP2017_GM_ITEM_CREATE-VENDOR = wa_mseg-LIFNR.

wa_E1BP2017_GM_ITEM_CREATE-ENTRY_QNT = wa_mseg-MENGE.

wa_E1BP2017_GM_ITEM_CREATE-ENTRY_UOM = wa_mseg-ERFME.

wa_E1BP2017_GM_ITEM_CREATE-PO_NUMBER = wa_mseg-EBELN.

wa_E1BP2017_GM_ITEM_CREATE-PO_ITEM = wa_mseg-EBELP.

move wa_E1BP2017_GM_ITEM_CREATE to wa_edidd-sdata.

wa_edidd-segnam = 'E1BP2017_GM_ITEM_CREATE'.

append wa_edidd to int_edidd.

endloop.

****************************************************

ENDFUNCTION.

Do remember to maintain the message control in WE20 where you maintain this outbound code against your output type.

Hope this helps!

[Former Member]

This is exactly what I needed.

Thank you