Solved: Need help on this issue.

Former Member · ‎2009 Apr 17

Hi Experts & Dear Matt,

Sorry for posting a request/thread (repost) like this.

but my situation is worst now, I am trying in different ways but have no solution yet.

It a minor problem where i dont know to correct, so getting problem(Pressure, Extra time used) from my higher authorities.

So please help me out by this situation.

My problem : I already posted a Thread, and I am reposting here again sorry for doing like this..

My thread :

Hi Experts,

I have a problem in SMARTforms,

First my requirement is Label Printing,(3 per page) I/p selection is MATNR & PLANT & LGORT.

OUTPUT is full Classification details wth two Logo's on each label(total 6 logos per page)

I managed to get all the data into Final table(materials) and I am passing 3 materials at a time to FORM.

through loop & endloop. in between Loop I am calling my smart form,

My ITAB Structire is

MATNR1, LGORT1,MATNR2, LGORT2,MATNR3, LGORT3,

My problem is If user inputs upto 3 matnrs. its working fine.

when he enters more than 3 lets say 7.

first its showing print settings screen, when i select print preview, It shows the output fine(1,2,3Materials.)

but only One page. When I click on back, again its showing print settings, if I click print preview,

It shows the next 3 materials(4,5,6Materials), and when I click back again print settings finally 1 materials(7th).

My requirement is when I click on print preview, It should show 3 pages at a time instead of the above.

-Dunlop

Former Member · ‎2009 Apr 17

Hi Dunlop,

I Gor ur Problem.Don't call Smartform in loop.

design ur Label in MAIN window.

put loop of ur final table to main window.and create control command to jump into new page.

Thanks

Sai

Former Member · ‎2009 Apr 17

Hi Dunlop,

Why not call your smartforms OUTSIDE the loop?

And make sure that your smartform NEXT page set the page itself, so it can be recursive.

Regards,

Lim...

Former Member · ‎2009 Apr 17

Hi Ruslim,

This is my code...

i can avoid the user dailog in the second screen this is what i need, but I need to see all the pages at a time,

currently if i need to see i need to press back button and because of no_dialog is can see secod page directly.

to be more clear, instead of next page I am using standard back button(alos close & logoff same effect ), but i have to tal no of pages as 1 always, when i say back anain 1 only,

i mean it always showing page 00001 of 00001. and for each back it showing secon page,

I need 0001 of 0000X.(where X is the user input range of materials as explainied in the abpve post)


DATA: WA_PARAMETERS TYPE SSFCTRLOP,
WA_OPTIONS TYPE SSFCOMPOP.
WA_PARAMETERS-PREVIEW = 'X'. "Preview
" WA_OPTIONS-TDNOPRINT = 'X'. "No printing from print preview
LOOP AT IT_FINAL INTO WA_FINAL.
IF SY-TABIX EQ 1.
WA_PARAMETERS-NO_DIALOG = SPACE.
ELSE.
WA_PARAMETERS-NO_DIALOG = 'X'.
ENDIF.
CALL FUNCTION FNAME
EXPORTING
CONTROL_PARAMETERS = WA_PARAMETERS
OUTPUT_OPTIONS = WA_OPTIONS
GV_MATNR = WA_FINAL-MATNR
GV_LGORT = WA_FINAL-LGORT
GV_CLASS = WA_FINAL-CLASS
GV_KSCHL = WA_FINAL-KSCHL
GV_MATNR1 = WA_FINAL-MATNR1
GV_LGORT1 = WA_FINAL-LGORT1
GV_CLASS1 = WA_FINAL-CLASS1
GV_KSCHL1 = WA_FINAL-KSCHL1
GV_MATNR2 = WA_FINAL-MATNR2
GV_LGORT2 = WA_FINAL-LGORT2
GV_CLASS2 = WA_FINAL-CLASS2
GV_KSCHL2 = WA_FINAL-KSCHL2.
ENDLOOP.

Also tried in this way but no result.


DATA:SSFCTRLOP TYPE SSFCTRLOP,
SSFCTRLOP_OPEN TYPE SSFCTRLOP,
SSFCRESOP TYPE SSFCRESOP,
E_SSFCOMPOP TYPE SSFCOMPOP,
FL_OPEN.
LOOP AT IT_FINAL INTO WA_FINAL.
IF NOT E_SSFCOMPOP IS INITIAL.
After first time dialog doesn't open
SSFCTRLOP_OPEN-NO_DIALOG = 'X'.
ENDIF.
IF FL_OPEN = 'X'.
CALL FUNCTION 'SSF_CLOSE'.
ENDIF.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
USER_SETTINGS = SPACE
OUTPUT_OPTIONS = E_SSFCOMPOP
CONTROL_PARAMETERS = SSFCTRLOP_OPEN
IMPORTING
JOB_OUTPUT_OPTIONS = SSFCRESOP
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC = 0.
FL_OPEN = 'X'.
Only first time it opens dialog
CLEAR E_SSFCOMPOP-DIALOG.
SSFCTRLOP-NO_DIALOG = ' '.
ELSE.
Get print parameter choosen in the first print and
transfer them for next call of fm SSF_OPEN
MOVE-CORRESPONDING SSFCRESOP TO E_SSFCOMPOP.
ENDIF.
Block open and close of smartform in FM
SSFCTRLOP-NO_OPEN = 'X'.
SSFCTRLOP-NO_CLOSE = 'X'.
CALL FUNCTION FNAME
EXPORTING
CONTROL_PARAMETERS = SSFCTRLOP
OUTPUT_OPTIONS = E_SSFCOMPOP
GV_MATNR = WA_FINAL-MATNR
GV_LGORT = WA_FINAL-LGORT
GV_CLASS = WA_FINAL-CLASS
GV_KSCHL = WA_FINAL-KSCHL
GV_MATNR1 = WA_FINAL-MATNR1
GV_LGORT1 = WA_FINAL-LGORT1
GV_CLASS1 = WA_FINAL-CLASS1
GV_KSCHL1 = WA_FINAL-KSCHL1
GV_MATNR2 = WA_FINAL-MATNR2
GV_LGORT2 = WA_FINAL-LGORT2
GV_CLASS2 = WA_FINAL-CLASS2
GV_KSCHL2 = WA_FINAL-KSCHL2.
ENDLOOP.
CALL FUNCTION 'SSF_CLOSE'.

please Any body Help me out as i took extra mandays already.

-Dunlop

Former Member · ‎2009 Apr 17

Hi Dunlop,

I Gor ur Problem.Don't call Smartform in loop.

design ur Label in MAIN window.

put loop of ur final table to main window.and create control command to jump into new page.

Thanks

Sai

Former Member · ‎2009 Apr 17

Hi Sai,

Here comes the major problem,

After passing the variable to smartform as mentioned, I am retriving the data again like this

now I need to show both the passing variable and the retived variables,

retrived data is always 20-30 records, (classification of materials)

so i am making a loop here, to print classification. so i am doing this three time for three logos..

Hope you understand my problem now clearly.


TABLES : KSML,AUSP, CABN.
DATA: BEGIN OF T_TEMP OCCURS 0,
        CLASS LIKE KLAH-CLASS,         "Class number
        KLART LIKE KLAH-KLART,         "Class type
        CLINT LIKE KLAH-CLINT,         "Internal class number
      END OF T_TEMP.
DATA : IT_TEXT3 TYPE TABLE OF TY_TEXT,
       WA_TEXT3 LIKE LINE OF IT_TEXT3.
DATA : CNT1(2), CNT(2) .
DATA : IT_FINAL TYPE TABLE OF TY_FINAL, WA_FINAL LIKE LINE OF IT_FINAL.
Get the classification details KSSK and KLAH.
SELECT SINGLE S_{CLASS S}KLART L~CLINT INTO
    (T_TEMP-CLASS, T_TEMP-KLART, T_TEMP-CLINT)
FROM KSSK AS L INNER JOIN KLAH AS S ON S_{CLINT EQ L}CLINT
WHERE L~OBJEK EQ GV_MATNR.
CLEAR :IT_TEXT[],WA_TEXT.
retrieve characteristics info of a class
SELECT * FROM KSML WHERE CLINT = T_TEMP-CLINT
                     AND KLART = T_TEMP-KLART.
retrieve characteristics value info
  SELECT * FROM AUSP WHERE OBJEK = GV_MATNR
                       AND ATINN = KSML-IMERK
                       AND KLART = KSML-KLART.
retrieve characteristics info
    SELECT SINGLE * FROM CABN WHERE ATINN = AUSP-ATINN.
    MOVE CABN-ATNAM TO WA_TEXT-ATNAM. "Characteristics desc.
    MOVE AUSP-ATWRT TO WA_TEXT-ATWRT. "Characteristics Value
    MOVE CABN-ATINN TO WA_TEXT-ATINN.
    APPEND WA_TEXT TO IT_TEXT.
    CLEAR: WA_TEXT.
  ENDSELECT.                         "ausp
ENDSELECT.
DELETE IT_TEXT WHERE ATWRT IS INITIAL.
LOOP AT IT_TEXT INTO WA_TEXT.
  SELECT SINGLE ATBEZ INTO WA_TEXT-ATBEZ FROM CABNT
  WHERE ATINN = WA_TEXT-ATINN AND SPRAS = 'EN' . "SY-LANGU.
  MODIFY IT_TEXT FROM WA_TEXT.
  CLEAR WA_TEXT.
ENDLOOP.
LOOP AT IT_TEXT INTO WA_TEXT.
  CNT1 = CNT1 + 1.
ENDLOOP.
IF IT_TEXT IS NOT INITIAL.
  LOOP AT IT_TEXT INTO WA_TEXT.
    CNT = SY-TABIX MOD 2.
    IF CNT EQ 0.
      MOVE WA_TEXT-ATWRT TO WA_TEXT3-ATWRT1.
      MOVE WA_TEXT-ATBEZ TO WA_TEXT3-ATBEZ1.
      APPEND WA_TEXT3 TO IT_TEXT3.
      CLEAR : WA_TEXT3.
    ELSE.
      MOVE WA_TEXT-ATWRT TO WA_TEXT3-ATWRT.
      MOVE WA_TEXT-ATBEZ TO WA_TEXT3-ATBEZ.
    ENDIF.
  ENDLOOP.
  CNT = CNT1 MOD 2.
  IF CNT NE 0.
    APPEND WA_TEXT3 TO IT_TEXT3.
    CLEAR : WA_TEXT3.
  ENDIF.
  CLEAR : IT_TEXT[].
  IT_TEXT[] = IT_TEXT3[].
ENDIF.

-Dunlop

Former Member · ‎2009 Apr 21

Hi,

MULTIPLE POSTINGS

Check this sample code to generate a single spool request.


  DATA:
    P_INPUT   TYPE SSFCOMPIN,
    P_CONTROL TYPE SSFCTRLOP.
  P_INPUT-DIALOG = 'X'.
  CALL FUNCTION 'SSFCOMP_OPEN'
    EXPORTING
      INPUT = P_INPUT
    EXCEPTIONS
      ERROR = 1.
  LOOP AT IT_FINAL INTO WA_FINAL.
      P_CONTROL-NO_OPEN   = 'X'.
      P_CONTROL-NO_CLOSE  = 'X'.
    CALL FUNCTION FNAME
      EXPORTING
        CONTROL_PARAMETERS = P_CONTROL
        GV_MATNR           = WA_FINAL-MATNR.
 
 ENDLOOP.                             
  CALL FUNCTION 'SSFCOMP_CLOSE'.

Thanks & regards,

Dileep .C

By Category

Related Content

Activity Groups

Industry Groups

Influence and Feedback Groups

Interest Groups

Location Groups

Customer Only Groups

Forums

Related Resources

Products

Learning and Support

About

My SAP Profile

My SAP Profile

Need help on this issue.