lock objects

[Former Member]

How to implement lock objects?

Regards,

pandu

[Former Member]

hi pandu,

check it out,

Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.

SAP Provide three type of Lock objects.

- Read Lock(Shared Locked)

protects read access to an object. The read lock allows other transactions read access but not write access to

the locked area of the table

- Write Lock(exclusive lock)

protects write access to an object. The write lock allows other transactions neither read nor write access to

the locked area of the table.

- Enhanced write lock (exclusive lock without cumulating)

works like a write lock except that the enhanced write lock also protects from further accesses from the

same transaction.

You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.

Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.

Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.

Technicaly:

When you create a lock object System automatically creat two function module.

1. ENQUEUE_<Lockobject name>. to insert the object in a queue.

2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.

You have to use these function module in your program.

check this link for example.

http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm

tables:vbak.

call function 'ENQUEUE_EZLOCK3'

exporting

mode_vbak = 'E'

mandt = sy-mandt

vbeln = vbak-vbeln

• X_VBELN = ' '

• _SCOPE = '2'

• _WAIT = ' '

• _COLLECT = ' '

• EXCEPTIONS

• FOREIGN_LOCK = 1

• SYSTEM_FAILURE = 2

• OTHERS = 3

.

if sy-subrc <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

endif.

Normally ABAPers will create the Lock objects, because we know when to lock and how to lock and where to lock the Object then after completing our updations we unlock the Objects in the Tables

http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm

purpose: If multiple user try to access a database object, inconsistency may occer. To avoid that inconsistency and to let multiple user give the accessibility of the database objects the locking mechanism is used.

Steps: first we create a loc object in se11 . Suppose for a table mara. It will create two functional module.:

1. enque_lockobject

1. deque_lockobject

before updating any table first we lock the table by calling enque_lockobject fm and then after updating we release the lock by deque_lockobject.

http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm

GO TO SE11

Select the radio button "Lock object"..

Give the name starts with EZ or EY..

Example: EYTEST

Press Create button..

Give the short description..

Example: Lock object for table ZTABLE..

In the tables tab..Give the table name..

Example: ZTABLE

Save and generate..

Your lock object is now created..You can see the LOCK MODULES..

In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function

Lock objects:

http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm

http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm

Match Code Objects:

http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm

http://searchsap.techtarget.com/tip/0,289483,sid21_gci553386,00.html

See this link:

http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm

Check these links -

with regards,

asif

[Former Member]

How many types of lock objects?

How to create Lock objects?

What is the main use of it in real time?

Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.

SAP Provide three type of Lock objects.

- Read Lock(Shared Locked)

protects read access to an object. The read lock allows other transactions read access but not write access to

the locked area of the table

- Write Lock(exclusive lock)

protects write access to an object. The write lock allows other transactions neither read nor write access to

the locked area of the table.

- Enhanced write lock (exclusive lock without cumulating)

works like a write lock except that the enhanced write lock also protects from further accesses from the

same transaction.

You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.

Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.

Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.

Technicaly:

When you create a lock object System automatically creat two function module.

1. ENQUEUE_<Lockobject name>. to insert the object in a queue.

2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.

You have to use these function module in your program.

[Former Member]

Hi Pandurangarao,

SAP data dictionary provides you with a locking mechanism to synchronize simultaneous data access by different users.

Lock objects are created in SE11.

Customer lock objects must begin with EY or EZ .

Three possible lock modes exist for lock objects.

Lock Mode

Lock mode E: This sets a lock for changing data for single user. This lock can be accumulated.

Lock mode X: This mode is used like mode E for changing data. The only technical difference from mode E is that the respective lock does not allow accumulation.

Lock mode S: This mode ensures that data displayed in your program cannot be changed by other users during the entire display time. Here you do not want to change the data yourself (allows read only access for data).

Creating Lock object

SE11

1)Enter lock object name beginning with EY or EZ

and hit create.

2)Enter table names containing data records that should be locked and the lock mode.

Enter short text /tbale/lockmode.

3) The primary keys of the specified tables are automatically selected as lock parameters.

It automatically selects the primary key for the selected table.

To set a lock in the application program

call a function module ENQUEUE_<LOCK_OBJECT>.

For our example, it would be ENQUEUE_EZMARA.

To release the lock in the application program

call a function module DEQUEUE_<LOCK_OBJECT>.

For our example, it would be DEQUEUE_EZMARA.

Refer the code executed by user (say abap1) for

matnr = ’000000000000000012’.

Lock Objects are used to synchronize access to the same data by more than one user. Function modules that can be used in application programs are generated from the definition of a lock object in the ABAP Dictionary.

The R/3 System synchronizes simultaneous access of several users to the same data records with a lock mechanism. When interactive transactions are programmed, locks are set and released by calling function modules .These function modules are automatically generated from the definition of lock objects in the ABAP Dictionary.

Structure of a Lock Object

The tables in which data records should be locked with a lock request are defined in a lock object together with their key fields.

When tables are selected, one table (the primary table) is first selected. Further tables (secondary tables) can also be added using foreign key relationships.

Lock Arguments

The lock argument of a table in the lock object consists of the key fields of the table.

The lock argument fields of a lock object are used as input parameters in the function modules for setting and removing locks generated from the lock object definition. When these function modules are called, the table rows to be locked or

unlocked are specified by defining certain values in these fields.These values can also be generic. The lock argument fields therefore define which subset of the table rows should be locked

.

Data Dictionary/ Lock Objects

The simplest case of a lock object consists of exactly one table and the lock argument of the table is the primary key of this table. Several tables can also be included in a lock object. A lock request therefore can lock an entire logical

object, and not only a record of a table. Such a logical object can be for example a document comprising an entry in a header table and N entries in a positiontable.

Lock Mode

The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the

lock table of the system for each table. Access by more than one user can be synchronized in the

following ways:

Exclusive lock: The locked data can only be displayed or

edited by a single user. A request for another exclusive lock

or for a

shared lock is rejected.

Shared lock: More than one user can access the locked data

at the same time in display mode. A request for another

shared lock is accepted, even if it comes from another user. An exclusive lock

is rejected. Exclusive but not cumulative: Exclusive locks can be requested

several times from the same transaction and are processed

successively. In contrast, exclusive but not cumulative locks

can be called only once from the same transaction. All other

lock requests are rejected.

1) Select object type Lock object in the initial screen of the ABAP Dictionary, enter an object name and choose Create. The name of a lock object should begin with an E (Enqueue).The maintenance screen for lock objects is displayed.

2) Enter an explanatory short text in the field Short text. You can then use the short text to find the lock object at a later time, for example with the R/3 Repository Information System.

3) Enter the name of the primary table of the lock object. All other tables in the lock object must be linked with the primary table using foreign keys.

4) Select the lock mode of the primary table in the field below it The lock mode is used as the default value for the corresponding parameters of the function modules generated from the lock object.

5) Choose Add if you want to lock records in more than one

table with the lock object. A list of all the tables linked with the primary table using valid foreign keys is displayed. Select the appropriate table. The lock

mode of the primary table is copied as lock mode. You can change this setting as required, for example you can assign the lock mode separately for each table.

Similarly, you can add a table linked with the secondary table just added with foreign keys. To do this, place the cursor on the name of the secondary table and choose Add.

If no lock mode is assigned to a table, no lock is set for the

entries in this table when the generated function modules are

called. You should not assign a lock mode if a secondary table

was only used to define a path between the primary table and

another secondary table with foreign keys.

6) Save your entries.

A dialog box appears in which you have to assign the lock

object a development class.

7) You can define whether the function modules generated from

the lock object should be RFC-enabled on the Attributes tab

page. If you set the Allow RFC flag, the generated function

modules can be called from within another system with Remote

Function Call. If you permit Remote Function Calls for an

existing lock object, you must ensure that the generated

function modules are called from within an ABAP program with

parameters appropriate for the type. You should therefore check

all programs that use the associated function modules before

activating the lock object with the new option.

😎 Choose Activate

kindly reward if found helpful.

cheers,

Hema.

Edited by: Hema Sundar Munagapati on Jan 21, 2008 1:36 PM

[George_Lioumis]

Hi.

If you need to create a lock on table ZTEST for example, go to SE11, check the lock object radiobutton and write EZTEST and create it. In the name of the table, set the ZTEST table depending on your requirment, set the Lock Mode. Activate it and you are done. From the menu Go To-> Lock Modules you can see the 2 function modules that you need to call in your program in order to lock and unlock the ZTEST table (the modules will be called ENQUEUE_EZTEST and DEQUEUE_EZTEST).

Regards,

George

[Former Member]

Hi,

Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.

SAP Provide three type of Lock objects.

- Read Lock(Shared Locked)

protects read access to an object. The read lock allows other transactions read access but not write access to

the locked area of the table

- Write Lock(exclusive lock)

protects write access to an object. The write lock allows other transactions neither read nor write access to

the locked area of the table.

- Enhanced write lock (exclusive lock without cumulating)

works like a write lock except that the enhanced write lock also protects from further accesses from the

same transaction.

You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.

Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.

Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.

Technicaly:

When you create a lock object System automatically creat two function module.

1. ENQUEUE_<Lockobject name>. to insert the object in a queue.

2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.

You have to use these function module in your program.

check this link for example.

http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm

tables:vbak.

call function 'ENQUEUE_EZLOCK3'

exporting

mode_vbak = 'E'

mandt = sy-mandt

vbeln = vbak-vbeln

• X_VBELN = ' '

• _SCOPE = '2'

• _WAIT = ' '

• _COLLECT = ' '

• EXCEPTIONS

• FOREIGN_LOCK = 1

• SYSTEM_FAILURE = 2

• OTHERS = 3

.

if sy-subrc <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

endif.

Normally ABAPers will create the Lock objects, because we know when to lock and how to lock and where to lock the Object then after completing our updations we unlock the Objects in the Tables

http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm

purpose: If multiple user try to access a database object, inconsistency may occer. To avoid that inconsistency and to let multiple user give the accessibility of the database objects the locking mechanism is used.

Steps: first we create a loc object in se11 . Suppose for a table mara. It will create two functional module.:

1. enque_lockobject

1. deque_lockobject

before updating any table first we lock the table by calling enque_lockobject fm and then after updating we release the lock by deque_lockobject.

http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm

GO TO SE11

Select the radio button "Lock object"..

Give the name starts with EZ or EY..

Example: EYTEST

Press Create button..

Give the short description..

Example: Lock object for table ZTABLE..

In the tables tab..Give the table name..

Example: ZTABLE

Save and generate..

Your lock object is now created..You can see the LOCK MODULES..

In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function

Lock objects:

http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm

http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm

Match Code Objects:

http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm

http://searchsap.techtarget.com/tip/0,289483,sid21_gci553386,00.html

See this link:

http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm

Check these links -

regards,

vasavi.

kindly reward if helpful

[Former Member]

For implementing the Lock Object . first you need to create for new table . if it is an Standard table then you can implement it .

step by step .

Creating Lock Objects

Procedure

Select object type Lock object in the initial screen of the ABAP Dictionary, enter an object name and choose Create. The name of a lock object should begin with an E (Enqueue).

The maintenance screen for lock objects is displayed.

Enter an explanatory short text in the field Short text.

You can then use the short text to find the lock object at a later time, for example with the R/3 Repository Information System.

Enter the name of the primary table of the lock object.

All other tables in the lock object must be linked with the primary table using foreign keys. There are also some restrictions on the valid foreign key relationships.

Select the lock mode of the primary table in the field below it.

The lock mode is used as the default value for the corresponding parameters of the function modules generated from the lock object.

Choose Add if you want to lock records in more than one table with the lock object.

A list of all the tables linked with the primary table using valid foreign keys is displayed. Select the appropriate table. The lock mode of the primary table is copied as lock mode. You can change this setting as required, for example you can assign the lock mode separately for each table.

Similarly, you can add a table linked with the secondary table just added with foreign keys. To do this, place the cursor on the name of the secondary table and choose Add.

If no lock mode is assigned to a table, no lock is set for the entries in this table when the generated function modules are called. You should not assign a lock mode if a secondary table was only used to define a path between the primary table and another secondary table with foreign keys.

Save your entries.

A dialog box appears in which you have to assign the lock object a development class.

You can (optionally) exclude lock parameters (see lock objects) from the function module generation on the Lock parameter tab page. This makes sense for example if you always want to lock a parameter generically.

To do this, simply deselect the Weight flag for the parameter. The parameter is not taken into consideration in the generated function modules. This parameter is then always locked generically.

The name of a lock parameter is usually the name of the corresponding table field. If two fields with the same name are used as lock parameters in the lock object from different tables, you must choose a new name for one of the fields in field Lock parameter.

You can define whether the function modules generated from the lock object should be RFC-enabled on the Attributes tab page.

If you set the Allow RFC flag, the generated function modules can be called from within another system with Remote Function Call.

If you permit Remote Function Calls for an existing lock object, you must ensure that the generated function modules are called from within an ABAP program with parameters appropriate for the type. You should therefore check all programs that use the associated function modules before activating the lock object with the new option.

Choose activate .

For more details please look into this link with screen shots :

[http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/frameset.htm]

Reward points if it is usefull...

Girish