how can i handle errors in bdc - call transaction method using tcode xk01

[Former Member]

Hi,

i want to know how can i handle errors in call transaction method using tcode xk01. I have written a program in se38 but its not working.

TYPES : BEGIN OF itab,

lifnr TYPE rf02k-lifnr,

ktokk TYPE rf02k-ktokk,

END OF itab.

DATA : i_tab TYPE TABLE OF itab INITIAL SIZE 0,

wa_tab TYPE itab.

DATA : i_bdc TYPE TABLE OF bdcdata INITIAL SIZE 0,

wa_bdc TYPE bdcdata.

DATA : i_message LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,

wa_message TYPE bdcmsgcoll.

DATA : fname TYPE string VALUE 'd:\manish.txt'.

DATA: p_text(100) TYPE c.

START-OF-SELECTION.

CALL FUNCTION 'GUI_UPLOAD'

EXPORTING

filename = fname

filetype = 'ASC'

has_field_separator = 'X'

TABLES

data_tab = i_tab.

IF sy-subrc <> 0.

MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno

WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.

ENDIF.

LOOP AT i_tab INTO wa_tab.

PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.

PERFORM bdc_field USING 'RF02K-LIFNR' wa_tab-lifnr.

PERFORM bdc_field USING 'RF02K-KTOKK' wa_tab-ktokk.

PERFORM bdc_field USING 'BDC_OKCODE' '= AUSW'.

CALL TRANSACTION 'XK01' USING i_bdc MODE 'N'. " UPDATE 'S' MESSAGES

"INTO i_message.

REFRESH i_bdc.

ENDLOOP.

IF sy-subrc NE 0.

READ TABLE i_message WITH KEY msgtyp = 'E'.

IF sy-subrc = 0.

LOOP AT i_message INTO wa_message.

CALL FUNCTION 'FORMAT_MESSAGE'

EXPORTING

id = i_message-msgid

lang = 'EN'

no = i_message-msgnr

v1 = i_message-msgv1

v2 = i_message-msgv2

v3 = i_message-msgv3

v4 = i_message-msgv4

IMPORTING

msg = p_text

EXCEPTIONS

not_found = 1

OTHERS = 2.

WRITE:/ p_text.

ENDLOOP.

ENDIF.

ENDIF.

&----

---

*& Form bdc_dynpro

&----

---

• text

----

---

• -->PROGRAM text

• -->DYNPRO text

----

---

FORM bdc_dynpro USING program dynpro.

CLEAR wa_bdc.

wa_bdc-program = program.

wa_bdc-dynpro = dynpro.

wa_bdc-dynbegin = 'X'.

APPEND wa_bdc TO i_bdc.

ENDFORM. "bdc_dynpro

&----

---

*& Form bdc_field

&----

---

• text

----

---

• -->FNAM text

• -->FVAL text

----

---

[Former Member]

Hi,

modify the codes as mentioned above and check each loop in debug mode and verify whether each call transaction is successful or not!

Regards.

[Former Member]

Hi manish

you said it 's not working . What do you mean ? Please give me a detail .

Regards

Wiboon

[Former Member]

when i execute the program its not showing any errors log in sm37.

u suggest what should i do.

[dev_parbutteea]

Hi,

you should treat each call transaction's message within the loop itself.

LOOP AT i_tab INTO wa_tab.

PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.

PERFORM bdc_field USING 'RF02K-LIFNR' wa_tab-lifnr.

PERFORM bdc_field USING 'RF02K-KTOKK' wa_tab-ktokk.

PERFORM bdc_field USING 'BDC_OKCODE' '= AUSW'.

<b>CALL TRANSACTION 'XK01'

USING i_bdc

MODE 'N'

UPDATE 'S' MESSAGES

INTO i_message.

IF sy-subrc NE 0.

READ TABLE i_message WITH KEY msgtyp = 'E'.

IF sy-subrc = 0.

CALL FUNCTION 'FORMAT_MESSAGE'

EXPORTING

id = i_message-msgid

lang = 'EN'

no = i_message-msgnr

v1 = i_message-msgv1

v2 = i_message-msgv2

v3 = i_message-msgv3

v4 = i_message-msgv4

IMPORTING

msg = p_text

EXCEPTIONS

not_found = 1

OTHERS = 2.

WRITE:/ p_text.

ENDIF.</b>

REFRESH i_bdc.

REFRESH i_message..

ENDLOOP.

Regards.

[Former Member]

even after making changes i cant find any result what should i do?

[Former Member]

Hi,

Check the following link:

http://sap-img.com/abap/retreive-error-message-from-bdc.htm

Regards,

Bhaskar

[Former Member]

hi manish,

loop the internal table i_message.

and in the loop u are using FORMAT_MESSAGE fm

it will give some return value in p_text.

for each rec. whether it is succcessful/ error the info will be stored in p_text.

append this info into another internal table.

loop this internal table outside the loop of i_message int table.

validate the message id.

if msgid eq 'E'.

store that rec into eror internal table.

and using that error internal table reprocess the error rec.

<b>Reward points if useful</b>

Chandra

[Former Member]

Hi,

Below is BDC using call transaction for TCode : MR21 (MAterial price chnage). Change your code exactly with this, as I used Error handling in this BDC and even it is working properly.

************************************************************************

*PROGRAM ID : ZMATERIAL_PRICE_CHANGE

*AUTHOR :

*DESCRIPTION : BDC PROGRAM TO CHANGE THE MATERIAL EXISTING PRICE

*TRANSACTION : MR21

*PROJECT :

*VERSION : 1.0

*REQUEST NO :

************************************************************************

report ZMATERIAL_PRICE_CHANGE

no standard page heading line-size 255.

TABLES : T100.

DATA : BEGIN OF IT_MATERIAL OCCURS 0,

INDEX(4), "Index Number

BUDAT(10), "Posting Date

BUKRS(4), " Company Code

WERKS(4), "Plant Number

XBLNR(16), "Reference

BKTXT(25), "Doc. Header Text

MATNR(18), "Material Number

BWTAR(10), "Valuation Type

NEWVALPR(11), " Valuation New Price

NEWPEINH(5), " New Price Per Unit

ER_MESSAGE(100), "Error Message

END OF IT_MATERIAL.

• Internal table to get the error data

DATA : it_error like IT_MATERIAL occurs 0 with header line.

*Internal table for Batch input: New table field structure

DATA : BDCDATA like BDCDATA occurs 0 with header line.

*Internal table for message

DATA : i_msgtab like bdcmsgcoll occurs 0 with header line.

************************************************************************

• Internal table to find the error from the legacy data *

************************************************************************

DATA : begin of it_erfind occurs 0,

INDEX(10), "INDEX Number

er_message(100), "For Error Message

end of it_erfind.

************************************************************************

• Variables declaration *

************************************************************************

DATA : g_message(200),

time(10),

date(10) ,

v_error_filename like RLGRAP-FILENAME.

date = sy-datum.

time = sy-uzeit.

************************************************************************

*Initialization

************************************************************************

initialization.

*Generating Error file name with date and time.

perform make_file_name.

************************************************************************

*Selection Screen

************************************************************************

SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.

parameter: p_file like IBIPPARMS-PATH obligatory.

SELECTION-SCREEN:END OF BLOCK B1.

at selection-screen ON VALUE-REQUEST FOR p_file .

perform get_filename.

************************************************************************

*START OF SELECTION

************************************************************************

start-of-selection.

perform upload_data.

perform fill_data.

end-of-selection.

********************************************************************

• Uploading data file to internal table. *

********************************************************************

FORM upload_data.

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = p_file

FILETYPE = 'DAT'

TABLES

DATA_TAB = IT_MATERIAL

EXCEPTIONS

CONVERSION_ERROR = 1

INVALID_TABLE_WIDTH = 2

INVALID_TYPE = 3

NO_BATCH = 4

UNKNOWN_ERROR = 5

GUI_REFUSE_FILETRANSFER = 6

OTHERS = 7.

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. "upload_data

&----

---

*& Form fill_data

&----

---

• text

----

---

FORM fill_data.

loop at IT_MATERIAL.

REFRESH BDCDATA.

perform bdc_dynpro using 'SAPRCKM_MR21' '0201'.

perform bdc_field using 'BDC_CURSOR'

'MR21HEAD-BKTXT'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_field using 'MR21HEAD-BUDAT'

IT_MATERIAL-BUDAT.

perform bdc_field using 'MR21HEAD-BUKRS'

IT_MATERIAL-BUKRS.

perform bdc_field using 'MR21HEAD-WERKS'

IT_MATERIAL-WERKS.

perform bdc_field using 'MR21HEAD-XBLNR'

IT_MATERIAL-XBLNR.

perform bdc_field using 'MR21HEAD-BKTXT'

IT_MATERIAL-XBLNR.

perform bdc_field using 'MR21HEAD-SCREEN_VARIANT'

'MR21_LAGERMATERIAL_0250'.

perform bdc_dynpro using 'SAPRCKM_MR21' '0201'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_field using 'BDC_CURSOR'

'CKI_MR21_0250-BWTAR(01)'.

perform bdc_field using 'MR21HEAD-SCREEN_VARIANT'

'MR21_LAGERMATERIAL_BWKEY_0250'.

perform bdc_field using 'CKI_MR21_0250-MATNR(01)'

IT_MATERIAL-MATNR.

perform bdc_field using 'CKI_MR21_0250-BWTAR(01)'

IT_MATERIAL-BWTAR.

perform bdc_dynpro using 'SAPRCKM_MR21' '0201'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_field using 'BDC_CURSOR'

'CKI_MR21_0250-NEWPEINH(01)'.

perform bdc_field using 'MR21HEAD-SCREEN_VARIANT'

'MR21_LAGERMATERIAL_BWKEY_0250'.

perform bdc_field using 'CKI_MR21_0250-NEWVALPR(01)'

IT_MATERIAL-NEWVALPR.

perform bdc_field using 'CKI_MR21_0250-NEWPEINH(01)'

IT_MATERIAL-NEWPEINH.

perform bdc_dynpro using 'SAPRCKM_MR21' '0201'.

perform bdc_field using 'BDC_OKCODE'

'=SAVE'.

perform bdc_field using 'BDC_CURSOR'

'CKI_MR21_0250-MATNR(02)'.

perform bdc_field using 'MR21HEAD-SCREEN_VARIANT'

'MR21_LAGERMATERIAL_BWKEY_0250'.

perform bdc_transaction tables i_msgtab using 'MR21' 'A' 'L'.

************************************************************************

*To fetch the error message from the standard error table

************************************************************************

select single * from T100 where SPRSL = 'E'

and ARBGB = SY-MSGID

and MSGNR = SY-MSGNO.

G_MESSAGE = T100-TEXT.

***********************************************************************

*subroutine to change the error message for every document number

***********************************************************************

perform REPLACE_PARAMETERS using SY-MSGV1

SY-MSGV2

SY-MSGV3

SY-MSGV4

changing G_MESSAGE.

write: / 'System variables:'.

skip.

write: / ' Sy-msgty:', SY-MSGTY.

write: / ' Sy-msgid:', SY-MSGID.

write: / ' Sy-msgno:', SY-MSGNO.

write: / ' Sy-msgv1:', SY-MSGV1.

write: / ' Sy-msgv2:', SY-MSGV2.

write: / ' Sy-msgv3:', SY-MSGV3.

write: / ' Sy-msgv4:', SY-MSGV4.

skip.

write: / 'Message:'.

skip.

write: / SY-MSGTY, G_MESSAGE.

************************************************************************

*To find out the error in the legacy data if there is anything and pass

*the document no with error message to the seperate internal table

*called it_erfind

************************************************************************

if sy-msgty = 'E'.

it_erfind-INDEX = IT_MATERIAL-INDEX.

it_erfind-er_message = G_MESSAGE.

append it_erfind.

clear it_erfind.

endif.

*Finally we are segregating the error and downloading the error data.

----

---

at last.

*To segregate the error

----

---

perform segregate_error.

*To download the error from it_error internal table with err mesg

----

---

perform error_download.

perform display_message.

endat.

endloop.

clear IT_MATERIAL.

ENDFORM. "fill_data

*Subrotine to replace the parameters

----

---

FORM REPLACE_PARAMETERS USING P_PAR_1 P_PAR_2 P_PAR_3

P_PAR_4 CHANGING P_MESSAGE.

• erst mal pruefen, ob numerierte Parameter verwendet wurden

----

---

DO.

REPLACE '&1' WITH P_PAR_1 INTO P_MESSAGE.

IF SY-SUBRC <> 0.

EXIT.

ENDIF.

ENDDO.

DO.

REPLACE '&2' WITH P_PAR_2 INTO P_MESSAGE.

IF SY-SUBRC <> 0.

EXIT.

ENDIF.

ENDDO.

DO.

REPLACE '&3' WITH P_PAR_3 INTO P_MESSAGE.

IF SY-SUBRC <> 0.

EXIT.

ENDIF.

ENDDO.

DO.

REPLACE '&4' WITH P_PAR_4 INTO P_MESSAGE.

IF SY-SUBRC <> 0.

EXIT.

ENDIF.

ENDDO.

• falls keine numerierten Parameter vorh., ersetzen wie gehabt

----

---

REPLACE '&' WITH P_PAR_1 INTO P_MESSAGE.

CONDENSE P_MESSAGE.

IF SY-SUBRC EQ 0.

REPLACE '&' WITH P_PAR_2 INTO P_MESSAGE.

CONDENSE P_MESSAGE.

IF SY-SUBRC EQ 0.

REPLACE '&' WITH P_PAR_3 INTO P_MESSAGE.

CONDENSE P_MESSAGE.

IF SY-SUBRC EQ 0.

REPLACE '&' WITH P_PAR_4 INTO P_MESSAGE.

CONDENSE P_MESSAGE.

ENDIF.

ENDIF.

ENDIF.

ENDFORM. "REPLACE_PARAMETERS

*Subroutine to segregate the error data from the legacy data

----

---

FORM segregate_error.

loop at it_erfind.

loop at IT_MATERIAL where INDEX = it_erfind-INDEX.

move-corresponding IT_MATERIAL to it_error.

it_error-er_message = it_erfind-er_message.

append it_error.

clear it_error.

endloop.

endloop.

ENDFORM. "segregate_error

********************************************************************

*Subroutine to download the error data from the it_error table.

********************************************************************

FORM error_download.

if it_error[] is not initial.

call function 'WS_DOWNLOAD'

EXPORTING

• CODEPAGE = 'IBM'

FILENAME = v_error_filename

FILETYPE = 'DAT'

TABLES

DATA_TAB = IT_ERROR.

endif.

ENDFORM. "error_download

----

---

• Start new screen *

----

---

FORM BDC_DYNPRO USING PROGRAM DYNPRO.

CLEAR BDCDATA.

BDCDATA-PROGRAM = PROGRAM.

BDCDATA-DYNPRO = DYNPRO.

BDCDATA-DYNBEGIN = 'X'.

APPEND BDCDATA.

ENDFORM. "BDC_DYNPRO

----

---

• Insert field *

----

---

FORM BDC_FIELD USING FNAM FVAL.

• IF FVAL <> NODATA.

CLEAR BDCDATA.

BDCDATA-FNAM = FNAM.

BDCDATA-FVAL = FVAL.

APPEND BDCDATA.

• ENDIF.

ENDFORM. "BDC_FIELD

FORM bdc_transaction tables MESSTAB USING TCODE CTUMODE CUPDATE .

CALL TRANSACTION TCODE USING BDCDATA

MODE CTUMODE

UPDATE CUPDATE

MESSAGES INTO MESSTAB.

REFRESH BDCDATA.

clear BDCDATA.

ENDFORM. " bdc_transaction

&----

---

*& Form display_message

&----

---

FORM display_message .

if it_error[] is initial.

message i019(zmsg). "Success

else.

message e020(zmsg). "Failed

endif.

ENDFORM. " display_message

&----

---

*& Form get_filename

&----

---

• text

----

---

• --> p1 text

• <-- p2 text

----

---

FORM get_filename .

CALL FUNCTION 'F4_FILENAME'

EXPORTING

PROGRAM_NAME = SYST-CPROG

DYNPRO_NUMBER = SYST-DYNNR

• FIELD_NAME = p_file

IMPORTING

FILE_NAME = p_file .

if sy-subrc NE 0 .

write : / 'Enter File Name'.

endif.

ENDFORM. " get_filename

&----

---

*& Form make_file_name

&----

---

FORM make_file_name .

write sy-datum to date MM/DD/YYYY.

write sy-uzeit to time USING EDIT MASK ' __ __ __'.

concatenate Text-002 date time '.txt'

into v_error_filename.

ENDFORM. " make_file_name

Thanks,

Sriram Ponna.

[dev_parbutteea]

Hi,

modify the codes as mentioned above and check each loop in debug mode and verify whether each call transaction is successful or not!

Regards.

[Former Member]

my problem is answered