Failure Mail Alert

[Former Member]

Hi ,

As part of mail automation i am selecting status of the process chains from RSPCPROCESSLOG table.In the select am putting a condition to ignore active,planned,finished status jobs,which of course left is failed ones.I am able to do that.But now the problem is if am doing a repeat for process chain which in turn will create a new entry as active in the table.But unfortunately failed entry will exist in the table,which in turn is creating a wrong mail alert.h

We can see status of the process chain as 'A' as well as 'X'.i want to ignore those conditions where chain with failed and active status is there.

[Former Member]

Hi ,

As part of mail automation i am selecting status of the process chains from RSPCPROCESSLOG table.In the select am putting a condition to ignore active,planned,finished status jobs,which of course left is failed ones.I am able to do that.But now the problem is if am doing a repeat for process chain which in turn will create a new entry as active in the table.But unfortunately failed entry will exist in the table,which in turn is creating a wrong mail alert.h

We can see status of the process chain as 'A' as well as 'X'.i want to ignore those conditions where chain with failed and active status is there.

[Former Member]

Hi,

You have to select the  all entries based on the process chain and condition should be ( WHERE STATE in ( 'A' , 'X' ).

so your internal table should contains the entries of A and X as well.

Read table internal table with key STATE = 'A'.

if sy- subrc = 0.

delete the entry

endif.

[Former Member]

Hi Kiran,

Thanks for the reply.

Attaching my piece of code

start-of-selection.
wait until gs_job-actual_state <> 'G'.
ls_date = sy-datum.
ls_date = ls_date - 1.



select LOG_ID
        TYPE
        EVENT_START
        JOB_COUNT
        BATCHDATE
        BATCHTIME
        VARIANTE
        INSTANCE
        STATE
        ACTUAL_STATE
        STARTTIMESTAMP
        ENDTIMESTAMP
        from RSPCPROCESSLOG
        into table gt_job
        where state not in ('F','G','A','P',' ')
        and batchdate between ls_date and sy-datum.
check sy-subrc = 0.
READ TABLE gt_job INTO gs_job WITH KEY state = 'A'.
if sy-subrc = 0.
   DELETE gt_job.
   endif.

IF GT_JOB[] IS NOT INITIAL.
select  CHAIN_ID
         LOG_ID
         DATUM
         ZEIT
         MANUAL_ABORT
         from RSPCLOGCHAIN
         into table gt_jobname
         for all entries in gt_job
         where log_id = gt_job-log_id.
ENDIF.

But the problem is still i can see my internal table with 'X' in it which is throwing automatic mail.

Table entry

Now the active jobs are in finished state.problem is log_id is same for all subsequent chains and i don't know how to remove thta entry from internal table as we know after doing repeat it might have completed.

Any suggestions on this.

Regards,

Kannan

[Former Member]

chekck the sample code below.

select LOG_ID

        TYPE

        EVENT_START

        JOB_COUNT

        BATCHDATE

        BATCHTIME

        VARIANTE

        INSTANCE

        STATE

        ACTUAL_STATE

        STARTTIMESTAMP

        ENDTIMESTAMP

        from RSPCPROCESSLOG

        into table gt_job

        where state not in ('F','G','A','P',' ')

        and batchdate between ls_date and sy-datum.

check sy-subrc = 0.

* again you need to check any of the process chain is having A and X

LOOP AT gt_job INTO WA_JOB.

CLEAR: WA_JOB.

SELECT SINGLE LOG_ID FROM RSPCPROCESSLOG

       INTO L_LOGID WHERE LOG_ID = WA_JOB-LOG_ID AND

                          TYPE = WA_JOBTYPE AND

                          JOB_COUNT = WA_JOB-JOB_COUNT

                          STATE = 'A'.

IF SY-SUBRC NE 0.

CONTINUE.

ELSE.

* AVOID THE RECORDS WHICH ARE HAVING THE X AND A

DELETE GT_JOB FROM WA_JOB.

ENDIF.

CLEAR: WA_JOB.

ENDLOOP.

[Former Member]

Hi Kiran,

Thanks for your suggestions.

lets put it this way.

i have 2 queries

1.

Here lineitem marked in red got failed in system(status X) but did a repeat and it again failed.table level it created two entries as follows.

As per my select it is picking this two line items and marking it as the second chain failure.I want only one mail alert for this.

2.

The line item marked in yellow,

As per the modification done in the code as follows

The table level entry

Have one entry as X and other one after doing repeat it completed successfully and became F.

Since we are using a select single based on the looping of same GT_job table it is having only the entry in "X" state, select query keeps failing and chain is populated into mail trigger.

Hope it clarifies further regarding my requirement to you.

Regards,

Kannan

[Former Member]

Hi Nair,

Just understand the query!

First time if you read the select you are only selecting the failed entries! so there is no chance to get the entries in gt_job with status 'A'.

select LOG_ID

        TYPE

        EVENT_START

        JOB_COUNT

        BATCHDATE

        BATCHTIME

        VARIANTE

        INSTANCE

        STATE

        ACTUAL_STATE

        STARTTIMESTAMP

        ENDTIMESTAMP

        from RSPCPROCESSLOG

        into table gt_job

        where state not in ('F','G','A','P',' ')

        and batchdate between ls_date and sy-datum.

* do you want to delete the duplicates by comparing the fields from gt_job! do let me know how you want to delete the duplicates.

*I understand that as per the below screen shot you don't want process the highlighted entry again! because the process id is failed first and when it re process success again. in this situation you can't notify the mail!

so to avoid this entry from the gt_job I suggested the loop as below.

Need to check the entry again, check the where condition as per your screen shot! I don't know the field names.

* in this gt_job you have the all failed entries

LOOP AT gt_job INTO WA_JOB.

CLEAR: WA_JOB.

* now you are checking any of the failed entry is re process and success- check the tables with the active state entries

* check the correct where condtions again!

SELECT SINGLE LOG_ID FROM RSPCPROCESSLOG

       INTO L_LOGID

WHERE LOG_ID = WA_JOB-LOG_ID AND

                          TYPE = WA_JOBTYPE AND

                          JOB_COUNT = WA_JOB-JOB_COUNT

                          STATE = 'A'.

IF SY-SUBRC NE 0.  " it means no entry find withe active

CONTINUE.

ELSE.

* if record found with active remove from the gt_job

DELETE GT_JOB FROM WA_JOB.

ENDIF.

CLEAR: WA_JOB.

[Former Member]

Hi Kiran,

Am new to Abap.Thanks for helping me understand better.

Your understanding regarding mail alert is correct.

As per my first select gt_job will have all failed entries regardless of whether during the second run it was successful or not.here we are looping the gt_job into a work area.and further...

SELECT SINGLE LOG_ID FROM RSPCPROCESSLOG

       INTO L_LOGID

WHERE LOG_ID = WA_JOB-LOG_ID AND

                          TYPE = WA_JOBTYPE AND

                          JOB_COUNT = WA_JOB-JOB_COUNT

                          STATE = 'A'.

you are trying to pass the entry and using it as key trying to delete.I got your point.

But in my case mentioned select is failing (sy-subrc -4) and is continue to fetch the next record.I checked in the table level as am able to see one with "X" state and other with "F" (finished)state..

attaching my code

TYPES:BEGIN OF TY_JOB,
LOG_ID type  RSPC_LOGID,
TYPE   type  RSPC_TYPE,
EVENT_START type BTCEVENTID,
JOB_COUNT type BTCJOBCNT,
BATCHDATE  type BTCRELDT,
BATCHTIME type BTCRELTM,
VARIANTE type RSPC_VARIANT,
INSTANCE type RSPC_INSTANCE,
STATE type RSPC_STATE,
ACTUAL_STATE type RSPC_STATE,
STARTTIMESTAMP type RSTIMESTMPL,
ENDTIMESTAMP type RSTIMESTMPL,
end of ty_job,
BEGIN OF TY_JOBNAME,
       CHAIN_ID TYPE RSPC_CHAIN,
       LOG_ID  TYPE RSPC_LOGID,
       DATUM   TYPE SYDATUM,
       ZEIT    TYPE SYUZEIT,
       MANUAL_ABORT  TYPE RSPC_MANUAL_ABORT,
END OF TY_JOBNAME.
data: gt_job type table of ty_job,
       gt_jobb type table of ty_job,
       gt_jobname type table of  ty_jobname,
       gs_job type ty_job,
       gs_jobname type ty_jobname,
       gs_maildata type SODOCCHGI1,
       mailtxt type table of SOLISTI1 with header line,
       mailrec type table of SOMLRECI1 with header line,
       OBJPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,
       OBJBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,
       ls_log_id type RSPC_LOGID,
       ls_date type sydatum,
       ls_time type sy-uzeit,
       ls_params like pri_params,
       ls_jobcount like tbtcjob-jobcount,
       ls_jobname like tbtcjob-jobname,
       gt_JOB_LOG type TABLE OF RSPC_S_MSG,
       gs_job_log type rspc_s_msg,
       TAB_LINES LIKE SY-TABIX.
*   DATA L_NUM(3).

*constants: cv_1 value 'G',
*            cv_2 value 'A',
*            cv_3 value 'F',
*            cv_4 value 'P'.


start-of-selection.
wait until gs_job-actual_state <> 'G'.
ls_date = sy-datum.
ls_date = ls_date - 1.



select LOG_ID
        TYPE
        EVENT_START
        JOB_COUNT
        BATCHDATE
        BATCHTIME
        VARIANTE
        INSTANCE
        STATE
        ACTUAL_STATE
        STARTTIMESTAMP
        ENDTIMESTAMP
        from RSPCPROCESSLOG
        into table gt_job
        where state not in ('F','G','A','P',' ')
        and batchdate between ls_date and sy-datum.
check sy-subrc = 0.
*READ TABLE gt_job INTO gs_job WITH KEY state = 'F'.
*if sy-subrc = 0.
*  DELETE gt_job.
*  endif.
loop at gt_job into gs_job.
   SELECT SINGLE log_id
          from RSPCPROCESSLOG
          into ls_log_id
          WHERE log_id = gs_job-log_id
          AND type = gs_job-type
          and job_count = gs_job-job_count
          and state in  ('A','F','G').
     if sy-subrc ne 0.
       CONTINUE.
       else.
         DELETE gt_job from gs_job.
         endif.
         CLEAR gs_job.
   ENDLOOP.

IF GT_JOB[] IS NOT INITIAL.
select  CHAIN_ID
         LOG_ID
         DATUM
         ZEIT
         MANUAL_ABORT
         from RSPCLOGCHAIN
         into table gt_jobname
         for all entries in gt_job
         where log_id = gt_job-log_id.
ENDIF.
loop at gt_jobname into gs_jobname.
  mailtxt-line = gs_jobname-chain_id.
  append mailtxt.
endloop.
loop at gt_job_log into gs_job_log.
   if gs_job_log-msgv4 = text-004.
   CONCATENATE gs_job_log-msgv1
               gs_job_log-msgv2
               gs_job_log-msgv4 into mailtxt SEPARATED BY space.
  append mailtxt.
  endif.
ENDLOOP.
clear: gs_maildata,mailrec,mailtxt.
gs_maildata-obj_name = text-002.
gs_maildata-obj_descr = text-001.
gs_maildata-obj_langu = sy-langu.
mailrec-receiver = 'ZAPO_JOBS'.
mailrec-rec_type = 'C'.
append mailrec.



CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
   EXPORTING
     DOCUMENT_DATA                    = gs_maildata
    DOCUMENT_TYPE                    = 'RAW'
    PUT_IN_OUTBOX                    =  'X'
    COMMIT_WORK                      = 'X'
* IMPORTING
*   SENT_TO_ALL                      =
*   NEW_OBJECT_ID                    =
   TABLES
    OBJECT_HEADER                    = mailtxt
    OBJECT_CONTENT                   = mailtxt
*   CONTENTS_HEX                     =
*   OBJECT_PARA                      =
*   OBJECT_PARB                      =
     RECEIVERS                        = mailrec
  EXCEPTIONS
    TOO_MANY_RECEIVERS               = 1
    DOCUMENT_NOT_SENT                = 2
    DOCUMENT_TYPE_NOT_EXIST          = 3
    OPERATION_NO_AUTHORIZATION       = 4
    PARAMETER_ERROR                  = 5
    X_ERROR                          = 6
    ENQUEUE_ERROR                    = 7
    OTHERS                           = 8
           .
IF SY-SUBRC <> 0.
  MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

I dont want to send mail when

1.Process chain failed first time on rerun it got success.

2.Process chain failed first on rerun need to send mail,but dont want 2 entries saying same chain is failed.

Suggestions are welcome.

Regards

Kannan

[Former Member]

Hi Nair,

I think the code is ok! just modified as per the second situation!

TYPES:BEGIN OF TY_JOB,

LOG_ID type  RSPC_LOGID,

TYPE   type  RSPC_TYPE,

EVENT_START type BTCEVENTID,

JOB_COUNT type BTCJOBCNT,

BATCHDATE  type BTCRELDT,

BATCHTIME type BTCRELTM,

VARIANTE type RSPC_VARIANT,

INSTANCE type RSPC_INSTANCE,

STATE type RSPC_STATE,

ACTUAL_STATE type RSPC_STATE,

STARTTIMESTAMP type RSTIMESTMPL,

ENDTIMESTAMP type RSTIMESTMPL,

end of ty_job,

BEGIN OF TY_JOBNAME,

       CHAIN_ID TYPE RSPC_CHAIN,

       LOG_ID  TYPE RSPC_LOGID,

       DATUM   TYPE SYDATUM,

       ZEIT    TYPE SYUZEIT,

       MANUAL_ABORT  TYPE RSPC_MANUAL_ABORT,

END OF TY_JOBNAME.

data: gt_job type table of ty_job,

       gt_jobb type table of ty_job,

       gt_jobname type table of  ty_jobname,

       gs_job type ty_job,

       gs_jobname type ty_jobname,

       gs_maildata type SODOCCHGI1,

       mailtxt type table of SOLISTI1 with header line,

       mailrec type table of SOMLRECI1 with header line,

       OBJPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,

       OBJBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,

       ls_log_id type RSPC_LOGID,

       ls_date type sydatum,

       ls_time type sy-uzeit,

       ls_params like pri_params,

       ls_jobcount like tbtcjob-jobcount,

       ls_jobname like tbtcjob-jobname,

       gt_JOB_LOG type TABLE OF RSPC_S_MSG,

       gs_job_log type rspc_s_msg,

       TAB_LINES LIKE SY-TABIX.

*   DATA L_NUM(3).

*constants: cv_1 value 'G',

*            cv_2 value 'A',

*            cv_3 value 'F',

*            cv_4 value 'P'.

start-of-selection.

wait until gs_job-actual_state <> 'G'.

ls_date = sy-datum.

ls_date = ls_date - 1.

select LOG_ID

        TYPE

        EVENT_START

        JOB_COUNT

        BATCHDATE

        BATCHTIME

        VARIANTE

        INSTANCE

        STATE

        ACTUAL_STATE

        STARTTIMESTAMP

        ENDTIMESTAMP

        from RSPCPROCESSLOG

        into table gt_job

        where state not in ('F','G','A','P',' ')

        and batchdate between ls_date and sy-datum.

check sy-subrc = 0.

loop at gt_job into gs_job.

   SELECT SINGLE log_id

          from RSPCPROCESSLOG

          into ls_log_id

          WHERE log_id = gs_job-log_id

          AND type = gs_job-type

          and job_count = gs_job-job_count

          and state in  ('A','F','G').

     if sy-subrc ne 0.

       CONTINUE.

       else.

         DELETE gt_job from gs_job.

         endif.

         CLEAR gs_job.

   ENDLOOP.

* if two entries are exists - need to send one mail only

DELETE ADJACENT DUPLICATES from gt_job comparing type job_count.....

IF GT_JOB[] IS NOT INITIAL.

select  CHAIN_ID

         LOG_ID

         DATUM

         ZEIT

         MANUAL_ABORT

         from RSPCLOGCHAIN

         into table gt_jobname

         for all entries in gt_job

         where log_id = gt_job-log_id.

ENDIF.

loop at gt_jobname into gs_jobname.

  mailtxt-line = gs_jobname-chain_id.

  append mailtxt.

endloop.

loop at gt_job_log into gs_job_log.

   if gs_job_log-msgv4 = text-004.

   CONCATENATE gs_job_log-msgv1

               gs_job_log-msgv2

               gs_job_log-msgv4 into mailtxt SEPARATED BY space.

  append mailtxt.

  endif.

ENDLOOP.

clear: gs_maildata,mailrec,mailtxt.

gs_maildata-obj_name = text-002.

gs_maildata-obj_descr = text-001.

gs_maildata-obj_langu = sy-langu.

mailrec-receiver = 'ZAPO_JOBS'.

mailrec-rec_type = 'C'.

append mailrec.

CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'

   EXPORTING

     DOCUMENT_DATA                    = gs_maildata

    DOCUMENT_TYPE                    = 'RAW'

    PUT_IN_OUTBOX                    =  'X'

    COMMIT_WORK                      = 'X'

* IMPORTING

*   SENT_TO_ALL                      =

*   NEW_OBJECT_ID                    =

   TABLES

    OBJECT_HEADER                    = mailtxt

    OBJECT_CONTENT                   = mailtxt

*   CONTENTS_HEX                     =

*   OBJECT_PARA                      =

*   OBJECT_PARB                      =

     RECEIVERS                        = mailrec

  EXCEPTIONS

    TOO_MANY_RECEIVERS               = 1

    DOCUMENT_NOT_SENT                = 2

    DOCUMENT_TYPE_NOT_EXIST          = 3

    OPERATION_NO_AUTHORIZATION       = 4

    PARAMETER_ERROR                  = 5

    X_ERROR                          = 6

    ENQUEUE_ERROR                    = 7

    OTHERS                           = 8

           .

IF SY-SUBRC <> 0.

  MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

[Former Member]

Hi Kiran,

Thanks for the helping hand..maximum rewards for you..

Completed my mail automation with kiind of modification  attaching my code...

*&---------------------------------------------------------------------*
*& Report  ZPROCESS_AUTO
*&
*&---------------------------------------------------------------------*
*&
*&
*&---------------------------------------------------------------------*

REPORT  ZPROCESS_AUTO.
TYPES:BEGIN OF TY_JOB,
LOG_ID type  RSPC_LOGID,
TYPE   type  RSPC_TYPE,
EVENT_START type BTCEVENTID,
JOB_COUNT type BTCJOBCNT,
BATCHDATE  type BTCRELDT,
BATCHTIME type BTCRELTM,
VARIANTE type RSPC_VARIANT,
INSTANCE type RSPC_INSTANCE,
STATE type RSPC_STATE,
ACTUAL_STATE type RSPC_STATE,
STARTTIMESTAMP type RSTIMESTMPL,
ENDTIMESTAMP type RSTIMESTMPL,
end of ty_job,
BEGIN OF TY_JOBNAME,
       CHAIN_ID TYPE RSPC_CHAIN,
       LOG_ID  TYPE RSPC_LOGID,
       DATUM   TYPE SYDATUM,
       ZEIT    TYPE SYUZEIT,
       MANUAL_ABORT  TYPE RSPC_MANUAL_ABORT,
END OF TY_JOBNAME.
data: gt_job type table of ty_job,
       gt_jobb type table of ty_job,
       gt_jobname type table of  ty_jobname,
       gs_job type ty_job,
       gs_jobname type ty_jobname,
       gs_maildata type SODOCCHGI1,
       mailtxt type table of SOLISTI1 with header line,
       mailrec type table of SOMLRECI1 with header line,
       OBJPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,
       OBJBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,
       ls_log_id type RSPC_LOGID,
       ls_date type sydatum,
       ls_time type sy-uzeit,
       ls_params like pri_params,
       ls_jobcount like tbtcjob-jobcount,
       ls_jobname like tbtcjob-jobname,
       gt_JOB_LOG type TABLE OF RSPC_S_MSG,
       gs_job_log type rspc_s_msg,
       TAB_LINES LIKE SY-TABIX.
*   DATA L_NUM(3).

*constants: cv_1 value 'G',
*            cv_2 value 'A',
*            cv_3 value 'F',
*            cv_4 value 'P'.


start-of-selection.
   wait until gs_job-actual_state <> 'G'.
   ls_date = sy-datum.
   ls_date = ls_date - 1.


   select LOG_ID
          TYPE
          EVENT_START
          JOB_COUNT
          BATCHDATE
          BATCHTIME
          VARIANTE
          INSTANCE
          STATE
          ACTUAL_STATE
          STARTTIMESTAMP
          ENDTIMESTAMP
          from RSPCPROCESSLOG
          into table gt_job
          where state not in ('F','G','A','P')
          and batchdate between ls_date and sy-datum.
   check sy-subrc = 0.
   sort gt_job by log_id type variante state.
   Delete ADJACENT DUPLICATES FROM gt_job COMPARING log_id type variante state.



   loop at gt_job into gs_job.
     SELECT SINGLE log_id
            from RSPCPROCESSLOG
            into ls_log_id
            WHERE log_id = gs_job-log_id
            AND type = gs_job-type
            and variante = gs_job-variante
            and state not in ('X','').
     if sy-subrc ne 0.
       CONTINUE.
     else.
       DELETE gt_job INDEX sy-tabix.
     endif.
     CLEAR gs_job.
   ENDLOOP.
   if GT_JOB[] IS NOT INITIAL.
     select  CHAIN_ID
             LOG_ID
             DATUM
             ZEIT
             MANUAL_ABORT
             from RSPCLOGCHAIN
             into table gt_jobname
             for all entries in gt_job
             where log_id = gt_job-log_id.
    endif.
   CHECK gt_jobname is NOT INITIAL.
   loop at gt_jobname into gs_jobname.
      mailtxt-line = gs_jobname-chain_id.
     append mailtxt.
     CALL FUNCTION 'RSPC_API_CHAIN_GET_LOG'
       EXPORTING
         I_CHAIN           = gs_jobname-chain_id
         I_LOGID           = gs_jobname-log_id
*    I_DONT_POLL       = 'X'
      TABLES
        E_T_LOG           = gt_job_log[]
               .
   ENDLOOP.
*check gt_jobname is NOT INITIAL.
*  loop at gt_jobname into gs_jobname.
*    mailtxt-line = gs_jobname-chain_id.
*    append mailtxt.
*  endloop.
sort gt_job_log by msgty msgv1 msgv2 msgv4.
Delete adjacent DUPLICATES FROM gt_job_log COMPARING msgty msgv1 msgv2 msgv4.
   loop at gt_job_log into gs_job_log.
    if gs_job_log-msgv4 = text-004.
       CONCATENATE gs_job_log-msgv1
                   gs_job_log-msgv2
                   gs_job_log-msgv4 into mailtxt SEPARATED BY space.
       append mailtxt.
     endif.
   ENDLOOP.
   clear: gs_maildata,mailrec,mailtxt.
   gs_maildata-obj_name = text-002.
   gs_maildata-obj_descr = text-001.
   gs_maildata-obj_langu = sy-langu.
   mailrec-receiver = 'ZAPO_JOBS'.
   mailrec-rec_type = 'C'.
   append mailrec.



   CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
       DOCUMENT_DATA                    = gs_maildata
      DOCUMENT_TYPE                    = 'RAW'
      PUT_IN_OUTBOX                    =  'X'
      COMMIT_WORK                      = 'X'
* IMPORTING
*   SENT_TO_ALL                      =
*   NEW_OBJECT_ID                    =
     TABLES
      OBJECT_HEADER                    = mailtxt
      OBJECT_CONTENT                   = mailtxt
*   CONTENTS_HEX                     =
*   OBJECT_PARA                      =
*   OBJECT_PARB                      =
       RECEIVERS                        = mailrec
    EXCEPTIONS
      TOO_MANY_RECEIVERS               = 1
      DOCUMENT_NOT_SENT                = 2
      DOCUMENT_TYPE_NOT_EXIST          = 3
      OPERATION_NO_AUTHORIZATION       = 4
      PARAMETER_ERROR                  = 5
      X_ERROR                          = 6
      ENQUEUE_ERROR                    = 7
      OTHERS                           = 8
             .
   IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.