BI-Error for BD30

[former_member611006]

Hi Experts,

I'm using BI for BD30 to send Mat.Bom with ALE :

CLEAR wa_bdcdata.
  wa_bdcdata-program  = 'RBDSEBOM'.
  wa_bdcdata-dynpro   = '1000'.
  wa_bdcdata-dynbegin = 'X'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'BDC_CURSOR'.
  wa_bdcdata-fval   = 'P_LOGSYS'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'BDC_OKCODE'.
  wa_bdcdata-fval   = '/00'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'SEL_MAT-LOW'.
  wa_bdcdata-fval   = lp_matnr.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'SEL_ANW-LOW'.
  wa_bdcdata-fval   = '3'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_DATUV'.
  wa_bdcdata-fval   = sy-datum.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_MESTYP'.
  wa_bdcdata-fval   = 'BOMMAT'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_MESCOD'.
  wa_bdcdata-fval   = 'CRE'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_LOGSYS'.
  wa_bdcdata-fval   = 'ST1'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-program  = 'RBDSEBOM'.
  wa_bdcdata-dynpro   = '1000'.
  wa_bdcdata-dynbegin = 'X'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'BDC_CURSOR'.
  wa_bdcdata-fval   = 'P_LOGSYS'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'BDC_OKCODE'.
  wa_bdcdata-fval   = '=ONLI'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'SEL_MAT-LOW'.
  wa_bdcdata-fval   = lp_matnr.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'SEL_ANW-LOW'.
  wa_bdcdata-fval   = '3'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_DATUV'.
  wa_bdcdata-fval   = sy-datum.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_MESTYP'.
  wa_bdcdata-fval   = 'BOMMAT'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_MESCOD'.
  wa_bdcdata-fval   = 'CRE'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_LOGSYS'.
  wa_bdcdata-fval   = 'ST1'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-program  = 'RBDSEBOM'.
  wa_bdcdata-dynpro   = '0100'.
  wa_bdcdata-dynbegin = 'X'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'BDC_OKCODE'.
  wa_bdcdata-fval   = '=DIST'.
  APPEND wa_bdcdata TO bdcdata.

  CALL TRANSACTION 'BD30'
        USING bdcdata MODE 'N' UPDATE 'S'
                      MESSAGES INTO messtab.

I always have the same Error :

No batch input data for screen RBDSEBOM 0100

Any idea ?

Regards,

David

[former_member611006]

Hi Experts,

I'm using BI for BD30 to send Mat.Bom with ALE :

CLEAR wa_bdcdata.
  wa_bdcdata-program  = 'RBDSEBOM'.
  wa_bdcdata-dynpro   = '1000'.
  wa_bdcdata-dynbegin = 'X'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'BDC_CURSOR'.
  wa_bdcdata-fval   = 'P_LOGSYS'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'BDC_OKCODE'.
  wa_bdcdata-fval   = '/00'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'SEL_MAT-LOW'.
  wa_bdcdata-fval   = lp_matnr.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'SEL_ANW-LOW'.
  wa_bdcdata-fval   = '3'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_DATUV'.
  wa_bdcdata-fval   = sy-datum.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_MESTYP'.
  wa_bdcdata-fval   = 'BOMMAT'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_MESCOD'.
  wa_bdcdata-fval   = 'CRE'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_LOGSYS'.
  wa_bdcdata-fval   = 'ST1'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-program  = 'RBDSEBOM'.
  wa_bdcdata-dynpro   = '1000'.
  wa_bdcdata-dynbegin = 'X'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'BDC_CURSOR'.
  wa_bdcdata-fval   = 'P_LOGSYS'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'BDC_OKCODE'.
  wa_bdcdata-fval   = '=ONLI'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'SEL_MAT-LOW'.
  wa_bdcdata-fval   = lp_matnr.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'SEL_ANW-LOW'.
  wa_bdcdata-fval   = '3'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_DATUV'.
  wa_bdcdata-fval   = sy-datum.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_MESTYP'.
  wa_bdcdata-fval   = 'BOMMAT'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_MESCOD'.
  wa_bdcdata-fval   = 'CRE'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'P_LOGSYS'.
  wa_bdcdata-fval   = 'ST1'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-program  = 'RBDSEBOM'.
  wa_bdcdata-dynpro   = '0100'.
  wa_bdcdata-dynbegin = 'X'.
  APPEND wa_bdcdata TO bdcdata.

  CLEAR wa_bdcdata.
  wa_bdcdata-fnam   = 'BDC_OKCODE'.
  wa_bdcdata-fval   = '=DIST'.
  APPEND wa_bdcdata TO bdcdata.

  CALL TRANSACTION 'BD30'
        USING bdcdata MODE 'N' UPDATE 'S'
                      MESSAGES INTO messtab.

I always have the same Error :

No batch input data for screen RBDSEBOM 0100

Any idea ?

Regards,

David

[former_member611006]

I found something :

BD30 is using an ALV Grid with Events. Can I use Batch-Input in this case ?

Regards,

David

[former_member611006]

Frontend controls are generally not capable of batch input. :-((

SAP Note 311440 - Batch input and controls

Regards,

David

[Former Member]

BD30 is checking if it is excuted in background. If you excute your batch input in background it will work.