BDC

[Former Member]

Hi friends,

am using the transaction mek1 for updating the price value KONP-KBETR.but am getting error field konp-kbetr not found in loop of screen sapmv13a 1017.if possible can any provide the solution.

Thanks in Advance,

sai.

[Former Member]

Hi ,

Please check the bdc recording again .and check for the field updated .Aslo some times due to IMG settingd certain fields are removed from the standard txn .check these fields.

[aditya_avadhanula]

Hi ,

Please check the bdc recording again .and check for the field updated .Aslo some times due to IMG settingd certain fields are removed from the standard txn .check these fields.

[Former Member]

Filed is getting the value from BDC but it was not updating in the transaction.

Am getting the same error message.

Thanks in advance,

sai.

[Former Member]

Hi Sai,

Just an idea I would share as i went through such a problem in my earlier project what I did was instead of generating the program from recording. I wrote my own code looking at the recording(so that i can know the screen sequence). The process I am talking is bit complicated but in my case it worked. try it.

Hope this discussion would be helpful to you.

Cheers,

Suvendu

[MarcinPciak]

Indeed there is no such field in this program. Ensure screen number is correct or screen field is right one. For this go to se80 -> type program name -> go to screen -> check its fields.

You may also use tcode SHDB recording example entry and then check what fields are addressed and what values are put there.

Regards

Marcin

[Former Member]

KONP-KBETR is in this screen, but in the table control. You have to reference it with the correct line number. Eg. KONP-KBETR(1)

Rob