Badi creation and implementation

[Former Member]

HI all ,

I want inforamtion on BADIs.

How to search for BADI and also creating and implementing the badi .

Regards

SAntosh .

[Former Member]

Business Add-Ins

Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.

As with customer exits (SMOD/CMOD Page 40), two different views are available:

• In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.

• In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.

In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.

SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.

The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.

In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.

A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects

DEFINING THE BADI

1) execute Tcode SE18.

2) Specify a definition Name : ZBADI_SPFLI

3) Press create

4) Choose the attribute tab. Specify short desc for badi.. and specify the type :

multiple use.

5) Choose the interface tab

6) Specify interface name: ZIF_EX_BADI_SPFLI and save.

7) Dbl clk on interface name to start class builder . specify a method name (name,

level, desc).

Method level desc

Linese;ection instance methos some desc

😎 place the cursor on the method name desc its parameters to define the interface.

Parameter type refe field desc

I_carrid import spfli-carrid some

I_connid import spefi-connid some

9) save , check and activate…adapter class proposed by system is

ZCL_IM_IM_LINESEL is genereated.

IMPLEMENTATION OF BADI DEFINITION

1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.

2) Specify aname for implementation ZIM_LINESEL

3) Specify short desc.

4) Choose interface tab. System proposes a name fo the implementation class.

ZCL_IM_IMLINESEL which is already generarted.

5) Specify short desc for method

6) Dbl clk on method to insert code..(check the code in “AAA”).

7) Save , check and activate the code.

Some useful URL

http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt

http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf

http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc

http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc

www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf

http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm

http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm

http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0...

Now write a sample program to use this badi method..

Look for “BBB” sample program.

“AAA”

data : wa_flights type sflight,

it_flights type table of sflight.

format color col_heading.

write:/ 'Flight info of:', i_carrid, i_connid.

format color col_normal.

select * from sflight

into corresponding fields of table it_flights

where carrid = i_carrid

and connid = i_connid.

loop at it_flights into wa_flights.

write:/ wa_flights-fldate,

wa_flights-planetype,

wa_flights-price currency wa_flights-currency,

wa_flights-seatsmax,

wa_flights-seatsocc.

endloop.

“BBB”

&----

---

*& Report ZBADI_TEST *

*& *

&----

---

REPORT ZBADI_TEST .

tables: spfli.

data: wa_spfli type spfli,

it_spfli type table of spfli with key carrid connid.

*Initialise the object of the interface.

data: exit_ref type ref to ZCL_IM_IM_LINESEL,

exit_ref1 type ref to ZIF_EX_BADISPFLI1.

selection-screen begin of block b1.

select-options: s_carr for spfli-carrid.

selection-screen end of block b1.

start-of-selection.

select * from spfli into corresponding fields of table it_spfli

where carrid in s_carr.

end-of-selection.

loop at it_spfli into wa_spfli.

write:/ wa_spfli-carrid,

wa_spfli-connid,

wa_spfli-cityfrom,

wa_spfli-deptime,

wa_spfli-arrtime.

hide: wa_spfli-carrid, wa_spfli-connid.

endloop.

at line-selection.

check not wa_spfli-carrid is initial.

create object exit_ref.

exit_ref1 = exit_ref.

call method exit_ref1->lineselection

EXPORTING

i_carrid = wa_spfli-carrid

i_connid = wa_spfli-connid.

clear wa_spfli.

Reward points..

[Former Member]

Business Add-Ins or BADI's

The use of object orientated code within SAP has lead to new method of enhancing standard SAP code called Business Add-Ins or BADI's for short. Although the implementation concept is based on classes, methods and inheritance you do not really have to understand this fully to implement a BADI. Simply think of methods as a function module with the same import and export parameters and follow the simple instructions below.

Steps:

1.Execute Business Add-In(BADI) transaction SE18

2. Enter BADI name i.e. HRPBSGB_HESA_NISR and press the display

button

3. Select menu option Implementation->Create

4. Give implementation a name such as Z_HRPBSGB_HESA_NISR

5. You can now make any changes you require to the BADI within this

implementation, for example choose the Interface tab

6. Double click on the method you want to change, you can now enter

any code you require.

7. Please note to find out what import and export parameters a

method has got return the original BADI definition

(i.e. HRPBSGB_HESA_NISR) and double click on the method name

for example within HRPBSGB_HESA_NISR contract is a method

8. When changes have been made activate the implementation

/people/sergey.korolev/blog/2005/03/14/the-time-for-me-to-have-a-badi-of-my-own

Business Add-Ins or BADI's

Reward points Please..

[Former Member]

Hi,

To find badis for any transactions --->

1. Go to Transaction SE24

2. Enter the Object Type CL_EXITHANDLER and click on Display.

3. Double Click on method "GET_INSTANCE".

4. Put a Break-point on

Call method cl_exithandler=>get_class_name_by_interface

5. Run any Transaction for which you need enhancements.

6. The execution will stop at the break point. Check the values of variable 'exit_name', it will give you the BADI name called at that time.

Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.

When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction .

YOu can go through these links...

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb9...

Step by step proc

http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm

http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf

http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt

http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc

http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc

http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip

http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt

Regards,

Raj.

[Former Member]

There are two steps in User Exit creation.

1} Identify the User Exit suitable for the requirement and that is available in the system:

Code SE18 is used to Identify the BADI available.

Look for the string 'CL_EXITHANDLER' in the standard program. This is a class which has a method 'GET_INSTANCE' which is used to trigger BADI's from the Standard Program. The interface parameter for this static method 'EXIT_NAME' is used to pass the BADI to the method.

Open Standard Program and do a global search 'CL_EXITHANDLER'.

SE18 > give the BADI name found through above search.

CUSTOMER_ADD_DATA > which has a method SAVE_DATA.

2} Implement the User Exit identified through above process.

T.Code SE19 is used to Implement BADI.

SE19 > give the implementation name > Give the Definition name as CUSTOMER_ADD_DATA and the Short Text.

Check this blogs 2 find a BADI:

How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,

When to Use a BAdI?)

/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series

How to implement a BAdI And How to Use a Filter

/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework

Introducing Business Add-Ins

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0...

How to implement BAdi in Enhancement Framework

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb9...

Business Add-Ins

http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm

BAdI: Customer-Defined Functions in the Formula Builder

http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm

Difference Between BADI and User Exits

http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm

To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept

http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm

You can check the links for Step by Step Badi Implemntation

(very helpful self learning docs).

BADI Step by Step Implementation.

http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt

http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf

http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc

http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc

www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf

http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm

http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm

http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm

http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm

http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm

https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&

http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt

http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf

http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc

http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc

www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf

http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm

http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm

http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm

http://support.sas.com/rnd/papers/sugi30/SAP.ppt

http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm

http://members.aol.com/_ht_a/skarkada/sap/

http://www.ct-software.com/reportpool_frame.htm

http://www.saphelp.com/SAP_Technical.htm

http://www.kabai.com/abaps/q.htm

http://www.guidancetech.com/people/holland/sap/abap/

http://www.planetsap.com/download_abap_programs.htm

http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm

http://www.allsaplinks.com/badi.html

/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it

/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework

http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt

http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf

http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc

http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc

http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316a...

http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm

http://support.sas.com/rnd/papers/sugi30/SAP.ppt

http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm

http://members.aol.com/_ht_a/skarkada/sap/

http://www.ct-software.com/reportpool_frame.htm

http://www.saphelp.com/SAP_Technical.htm

http://www.kabai.com/abaps/q.htm

http://www.guidancetech.com/people/holland/sap/abap/

http://www.planetsap.com/download_abap_programs.htm

http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm

/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series

/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework

http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt

http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc

http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf

http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc

http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip

http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt

http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm

Difference Between BADI and User Exits

http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm

Business Add-Ins

Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.

As with customer exits (SMOD/CMOD Page 40), two different views are available:

• In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.

• In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.

In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.

SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.

The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.

In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.

A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects

DEFINING THE BADI

1) execute Tcode SE18.

2) Specify a definition Name : ZBADI_SPFLI

3) Press create

4) Choose the attribute tab. Specify short desc for badi.. and specify the type :

multiple use.

5) Choose the interface tab

6) Specify interface name: ZIF_EX_BADI_SPFLI and save.

7) Dbl clk on interface name to start class builder . specify a method name (name,

level, desc).

Method level desc

Linese;ection instance methos some desc

😎 place the cursor on the method name desc its parameters to define the interface.

Parameter type refe field desc

I_carrid import spfli-carrid some

I_connid import spefi-connid some

9) save , check and activate…adapter class proposed by system is

ZCL_IM_IM_LINESEL is genereated.

IMPLEMENTATION OF BADI DEFINITION

1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.

2) Specify aname for implementation ZIM_LINESEL

3) Specify short desc.

4) Choose interface tab. System proposes a name fo the implementation class.

ZCL_IM_IMLINESEL which is already generarted.

5) Specify short desc for method

6) Dbl clk on method to insert code..(check the code in “AAA”).

7) Save , check and activate the code.

Some useful URL

http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt

http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf

http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc

http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc

www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf

http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm

http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm

http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm

Now write a sample program to use this badi method..

Look for “BBB” sample program.

“AAA”

data : wa_flights type sflight,

it_flights type table of sflight.

format color col_heading.

write:/ 'Flight info of:', i_carrid, i_connid.

format color col_normal.

select * from sflight

into corresponding fields of table it_flights

where carrid = i_carrid

and connid = i_connid.

loop at it_flights into wa_flights.

write:/ wa_flights-fldate,

wa_flights-planetype,

wa_flights-price currency wa_flights-currency,

wa_flights-seatsmax,

wa_flights-seatsocc.

endloop.

“BBB”

&----

---

*& Report ZBADI_TEST *

*& *

&----

---

REPORT ZBADI_TEST .

tables: spfli.

data: wa_spfli type spfli,

it_spfli type table of spfli with key carrid connid.

*Initialise the object of the interface.

data: exit_ref type ref to ZCL_IM_IM_LINESEL,

exit_ref1 type ref to ZIF_EX_BADISPFLI1.

selection-screen begin of block b1.

select-options: s_carr for spfli-carrid.

selection-screen end of block b1.

start-of-selection.

select * from spfli into corresponding fields of table it_spfli

where carrid in s_carr.

end-of-selection.

loop at it_spfli into wa_spfli.

write:/ wa_spfli-carrid,

wa_spfli-connid,

wa_spfli-cityfrom,

wa_spfli-deptime,

wa_spfli-arrtime.

hide: wa_spfli-carrid, wa_spfli-connid.

endloop.

at line-selection.

check not wa_spfli-carrid is initial.

create object exit_ref.

exit_ref1 = exit_ref.

call method exit_ref1->lineselection

EXPORTING

i_carrid = wa_spfli-carrid

i_connid = wa_spfli-connid.

clear wa_spfli.

REPORT Z_BADI_TEST.

• test call Badi from standard abap. (Only from rel 6.40 and above)

• do the following

• 1) define the Badi (SE18). For Abap call test uncheck multiple use

• and filter boxes

• 2) Implement the badi (SE19). Add any methods here in the implemntation

• 3) activate

*

• 4) define the standard class exithandler to the abap. This class is the "Badi caller

"

• 5) define an exit variable referring to your Badi Implementation interface

• this interface will normally be something like ZIF_EX***************

• You will see this in SE18/SE19.

*

• 6) Instantiate your instance of the badi (method call get_instance)

• 7) Now call any method(s) in the Badi.

*

class cl_exithandler definition load. "Declaration

data exit type ref to zif_ex__jimbotest. "Interface reference

data yes type c.

data: v_knvv type knvv. "Used in Fmod call in Badi methods

start-of-selection.

yes = ' '.

selection-screen begin of block b1.

parameters: r1 radiobutton group rad1,

r2 radiobutton group rad1,

r3 radiobutton group rad1.

selection-screen end of block b1.

parameters: p_kunnr type knvv-kunnr.

select single * into v_knvv

from knvv

where kunnr eq p_kunnr.

export v_knvv to memory id 'CUST6A'. "Save customer data for the function module

call method cl_exithandler=>get_instance "Factory method call

exporting "Method

exit_name = 'Z_JIMBOTEST' "Name of your BADI

• null_instance_accepted = yes

changing instance = exit.

if not exit is initial.

break-point 1.

if r1 = 'X'.

call method exit->dispord . "Add-In call

• changing testparm1 = word.

endif.

if r2 = 'X'.

call method exit->dispfakt.

endif.

if r3 = 'X'.

call method exit->dispmat.

endif.

In the badi methods

1)

method ZIF_EX__JIMBOTEST~DISPORD.

CALL FUNCTION 'Z_DISPLAY_CUST'.

endmethod.

2)

method ZIF_EX__JIMBOTEST~DISPFAKT.

CALL FUNCTION 'Z_DISPLAY_FAKT'.

endmethod

3)

method ZIF_EX__JIMBOTEST~DISPMAT.

CALL FUNCTION 'Z_DISPLAY_CUST'.

endmethod.

Copy via SE 41 the status SALV_STANDARD from standard SAP program SALV_DEMO_METADATA into the main program where you've created the 3 function modules below (SAP______TOP)

Global Data for the three function modules I'm calling

FUNCTION-POOL Z_BADI_KNVV. "MESSAGE-ID ..

include <color>.

include <icon>.

include <symbol>.

tables: zknvv.

data: v_zzkvgr6 TYPE KNVV-ZZKVGR6.

data: choice1 type c.

data: choice2 type c.

data: choice3 type c.

data: choice4 Type c.

data: ok-code(5) type c.

data: answer type string.

data: value1 type SPOP-VARVALUE1.

data: answer1 type string.

tables: vbak, vbap, vakpa, vbrk, vrkpa.

data: lr_functions type ref to cl_salv_functions_list.

constants: gc_true type sap_bool value 'X',

gc_false type sap_bool value space.

• add for colour displays

data: ls_color type lvc_s_colo.

DATA : LV_SALV_COLUMNS_TABLE TYPE REF TO CL_SALV_COLUMNS_TABLE.

data: lr_columns type ref to cl_salv_columns_table,

lr_column type ref to cl_salv_column_table.

Data:

gr_table TYPE REF TO cl_salv_table.

data: z_datum type sy-datum.

data: v_knvv type knvv.

data : begin of s_vbak,

vkorg type vakpa-vkorg,

vkgrp type vakpa-vkgrp,

vtweg type vakpa-vtweg,

spart type vakpa-spart,

auart type vakpa-auart,

vbeln type vakpa-vbeln,

bstnk type vakpa-bstnk,

audat type vakpa-audat,

netwr type vbak-netwr,

end of s_vbak.

data : begin of s_vbrk,

vbeln type vrkpa-vbeln,

vkorg type vrkpa-vkorg,

fkart type vrkpa-fkart,

fkdat type vrkpa-fkdat,

netwr type vbrk-netwr,

end of s_vbrk.

data: begin of s_vbap,

matnr type vbap-matnr,

arktx type vbap-arktx,

netwr type vbap-netwr,

kwmeng type vbap-kwmeng,

end of s_vbap.

data: t_vbap like table of s_vbap.

data: t_vbak

like table of s_vbak.

data: t_vbrk

like table of s_vbrk.

data: s_name type tabname.

data: gr_selections type ref to cl_salv_selections.

data: gr_events type ref to cl_salv_events_table.

Source code of the function modules.

Function modules

FUNCTION Z_DISPLAY_CUST.

*"----

---

""Lokale interface:

*"----

---

s_name = 'S_VBAK'.

• orders in last 6 months

z_datum = sy-datum - 180.

import v_knvv from memory id 'CUST6A'.

• get data

select a_{vkorg a}audat a_{vkgrp a}vtweg a_{spart a}auart a_{bstnk a}vbeln b~netwr

into corresponding fields of table t_vbak

up to 100 rows

from ( vakpa as a

inner join vbak as b

on a_{vbeln eq b}vbeln )

where a~kunde eq v_knvv-kunnr

and a~parvw eq 'AG'

• and a~vkorg eq 'EN01'

and a~trvog eq '0'

and a~audat gt z_datum.

sort t_vbak by audat descending.

*data: gt_hyperlink type standard table of g_type_s_hyperlink.

• Instead of if_salv_c_bool_sap=>false, you can pass the

• value if_salv_c_bool_sap=>true to this method to

• see your ALV as a list.

• display data in Grid / List

TRY.

CALL METHOD cl_salv_table=>factory

EXPORTING

list_display = if_salv_c_bool_sap=>false

IMPORTING

r_salv_table = gr_table

CHANGING

t_table = t_vbak.

CATCH cx_salv_msg.

ENDTRY.

try.

LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).

lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).

ls_color-col = col_negative.

ls_color-int = 0.

ls_color-inv = 0.

lr_column->set_color( ls_color ).

catch cx_salv_not_found.

endtry.

try.

lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'VBELN' ).

ls_color-col = col_negative.

ls_color-int = 1.

ls_color-inv = 1.

lr_column->set_color( ls_color ).

catch cx_salv_not_found.

endtry.

try.

*LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).

lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).

lr_column->set_short_text( 'Short' ).

lr_column->set_medium_text( 'Medium' ).

lr_column->set_long_text( 'Net Value' ).

*lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'URL' ).

*

catch cx_salv_not_found.

endtry.

gr_table->set_screen_status( pfstatus = 'SALV_STANDARD'

report = sy-repid

set_functions = gr_table->c_functions_all ).

• this statement actually does the display.

gr_table->display( ).

ENDFUNCTION.

FUNCTION Z_DISPLAY_FAKT.

*"----

---

""Lokale interface:

*"----

---

s_name = 'S_VBRK'.

• invoices in last 6 months

z_datum = sy-datum - 180.

import v_knvv from memory id 'CUST6A'.

• get data

select a_{vbeln a}fkart a_{vkorg a}fkdat

b~netwr

into corresponding fields of table t_vbrk

up to 100 rows

from ( vrkpa as a

inner join vbrk as b

on a_{vbeln eq b}vbeln )

where a~kunde eq v_knvv-kunnr

and a~parvw eq 'RG'

• and a~vkorg eq 'EN01'

and a~vbtyp eq 'M'

and a~fkdat gt z_datum.

sort t_vbrk by fkdat descending.

*data: gt_hyperlink type standard table of g_type_s_hyperlink.

• Instead of if_salv_c_bool_sap=>false, you can pass the

• value if_salv_c_bool_sap=>true to this method to

• see your ALV as a list.

• display data in Grid / List

TRY.

CALL METHOD cl_salv_table=>factory

EXPORTING

list_display = if_salv_c_bool_sap=>false

IMPORTING

r_salv_table = gr_table

CHANGING

t_table = t_vbrk.

CATCH cx_salv_msg.

ENDTRY.

try.

LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).

lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).

ls_color-col = col_negative.

ls_color-int = 0.

ls_color-inv = 0.

lr_column->set_color( ls_color ).

catch cx_salv_not_found.

endtry.

try.

lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'VBELN' ).

ls_color-col = col_negative.

ls_color-int = 1.

ls_color-inv = 1.

lr_column->set_color( ls_color ).

catch cx_salv_not_found.

endtry.

try.

*LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).

lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).

lr_column->set_short_text( 'Short' ).

lr_column->set_medium_text( 'Medium' ).

lr_column->set_long_text( 'Net Value' ).

*lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'URL' ).

*

catch cx_salv_not_found.

endtry.

gr_table->set_screen_status( pfstatus = 'SALV_STANDARD'

report = sy-repid

set_functions = gr_table->c_functions_all ).

• this statement actually does the display.

gr_table->display( ).

ENDFUNCTION.

FUNCTION Z_DISPLAY_MATERIAL.

*"----

---

""Lokale interface:

*"----

---

s_name = 'S_VBAP'.

• invoicesrs in last 6 months

z_datum = sy-datum - 180.

import v_knvv from memory id 'CUST6A'.

• get data

select a_{vbeln b}matnr b_{arktx b}netwr b~kwmeng

into corresponding fields of table t_vbap

up to 100 rows

from ( vakpa as a

inner join vbap as b

on a_{vbeln eq b}vbeln )

where a~kunde eq v_knvv-kunnr

and a~parvw eq 'AG'

• and a~vkorg eq 'EN01'

and a~trvog eq '0'

and a~audat gt z_datum.

TRY.

CALL METHOD cl_salv_table=>factory

EXPORTING

list_display = if_salv_c_bool_sap=>false

IMPORTING

r_salv_table = gr_table

CHANGING

t_table = t_vbap.

CATCH cx_salv_msg.

ENDTRY.

try.

LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).

lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).

ls_color-col = col_negative.

ls_color-int = 0.

ls_color-inv = 0.

lr_column->set_color( ls_color ).

catch cx_salv_not_found.

endtry.

try.

lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'ARKTX' ).

ls_color-col = col_negative.

ls_color-int = 1.

ls_color-inv = 1.

lr_column->set_color( ls_color ).

catch cx_salv_not_found.

endtry.

try.

*LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).

lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).

lr_column->set_short_text( 'Short' ).

lr_column->set_medium_text( 'Medium' ).

lr_column->set_long_text( 'Net Value' ).

*lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'URL' ).

*

catch cx_salv_not_found.

endtry.

gr_table->set_screen_status( pfstatus = 'SALV_STANDARD'

report = sy-repid

set_functions = gr_table->c_functions_all ).

• this statement actually does the display.

gr_table->display( ).

ENDFUNCTION.

http://www.saptechnical.com/Tutorials/ExitsBADIs/VL02/page1.htm

Reward points..

[Former Member]

Hi santhosh,

The use of object orientated code within SAP has lead to new method of enhancing standard SAP code called

Business Add-Ins or BADI's for short. Although the implementation concept is based on classes, methods and

inheritance you do not really have to understand this fully to implement a BADI. Simply think of methods

as a function module with the same import and export parameters and follow the simple instructions below.

Steps:

1. Execute Business Add-In(BADI) transaction SE18

2. Enter BADI name i.e. HRPBSGB_HESA_NISR and press the display

button

3. Select menu option Implementation->Create

4. Give implementation a name such as Z_HRPBSGB_HESA_NISR

5. You can now make any changes you require to the BADI within this

implementation, for example choose the Interface tab

6. Double click on the method you want to change, you can now enter

any code you require.

7. Please note to find out what import and export parameters a

method has got return the original BADI definition

(i.e. HRPBSGB_HESA_NISR) and double click on the method name

for example within HRPBSGB_HESA_NISR contract is a method

8. When changes have been made activate the implementation

http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf

http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt

http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc

http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc

http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip

http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt

Regards.

Kiran

[Former Member]

hi santosh,

Please go through the following link for defining the badi

for implementing the badi go throurh the following link

these two links will provide you the detailed step by step process for creation of the badi with screen shots.

The name of the badi can be found by the folllowing steps,

Go to Transaction SE24 .

Enter the Object Type CL_EXITHANDLER and click on Display.

Double Click on method "GET_INSTANCE".

Put a Break-point on 

Call method cl_exithandler=>get_class_name_by_interface .

Run any Transaction for which you need enhancements.

The execution will stop at the break point.

Check the values of variable 'exit_name', it will give you the BADI name

called at that time.

another way is

Using the Performance Trace (formerly known as SQL trace)

transaction code ST05.

This analyzing technique is based on the fact that all BAdIs are

registrated in SAP database tables. So for each BAdI call these database

tables will be accessed.

The BAdI database tables are SXS_INTER,SXC_EXIT, SXC_CLASS and

SXC_ATTR.

These tables are always accessed by the views V_EXT_IMP and V_EXT_ACT .

So these two ABAP views (T: SE11) will be the basis for the trace.

these are the two ways we can find the badis,

i hope thwe aboce description is clear to you,

Please reward if usefull,

Thanks & regards,

A.kalyan.