ALV help

[Former Member]

Hi All,

I am working on alvs which is relatively new for me. I managed to get the output in a list. But the problem is I have two different table structures that I want to display. How can I do that. Can I display the two structures on the same output one below the other. Could somebody help me with this.

Thanks,

Kiran.

[Former Member]

Hi All,

I am working on alvs which is relatively new for me. I managed to get the output in a list. But the problem is I have two different table structures that I want to display. How can I do that. Can I display the two structures on the same output one below the other. Could somebody help me with this.

Thanks,

Kiran.

[Former Member]

yes for that you have to use block list display.

check the code below..

*&---------------------------------------------------------------------*
*& Report  ZSPD_ALV_BLOCK                                              *
*&                                                                     *
*&---------------------------------------------------------------------*
*&                                                                     *
*&                                                                     *
*&---------------------------------------------------------------------*

REPORT  ZSPD_ALV_BLOCK .
TYPE-POOLS : SLIS.
TABLES : EKKO,EKPO.

DATA : BEGIN OF IEKKO OCCURS 0,
       EBELN LIKE EKKO-EBELN,
       AEDAT LIKE EKKO-AEDAT,
       END OF IEKKO.

DATA : BEGIN OF IEKPO OCCURS 0,
       EBELN LIKE EKPO-EBELN,
       EBELP LIKE EKPO-EBELP,
       MATNR LIKE EKPO-MATNR,
       MENGE LIKE EKPO-MENGE,
       MEINS LIKE EKPO-MEINS,
       END OF IEKPO.

DATA : IFIELDCATEKKO TYPE SLIS_T_FIELDCAT_ALV,
       IFIELDCATEKPO TYPE SLIS_T_FIELDCAT_ALV,
       WFIELDCAT     TYPE SLIS_FIELDCAT_ALV,
       ILAYOUT       TYPE SLIS_LAYOUT_ALV,
       IEVENTHEAD    TYPE SLIS_T_EVENT,
       IEVENTITEM    TYPE SLIS_T_EVENT,
       WEVENT        TYPE SLIS_ALV_EVENT.

PARAMETERS : P_NUM(3) TYPE N DEFAULT 10.


PERFORM GET_DATA_EKKO.
PERFORM GET_DATA_EKPO.

PERFORM BUILD_FCAT_HEAD.
PERFORM BUILD_FCAT_ITEM.
PERFORM BUILD_LAYOUT.
PERFORM BUILD_EVENT_TAB.


PERFORM DISPLAY_BLOCK.
*&---------------------------------------------------------------------*
*&      Form  GET_DATA_EKKO
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*  -->  p1        text
*  <--  p2        text
*----------------------------------------------------------------------*
FORM GET_DATA_EKKO .

SELECT EBELN AEDAT INTO TABLE IEKKO FROM EKKO UP TO P_NUM ROWS WHERE EBELN LIKE '45000057%'.

ENDFORM.                    " GET_DATA_EKKO
*&---------------------------------------------------------------------*
*&      Form  GET_DATA_EKPO
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*  -->  p1        text
*  <--  p2        text
*----------------------------------------------------------------------*
FORM GET_DATA_EKPO .

IF NOT IEKKO[] IS INITIAL.
  SELECT EBELN EBELP MATNR MENGE MEINS INTO TABLE IEKPO FROM EKPO FOR ALL ENTRIES IN IEKKO
                                                  WHERE EBELN = IEKKO-EBELN.
ENDIF.

ENDFORM.                    " GET_DATA_EKPO
*&---------------------------------------------------------------------*
*&      Form  DISPLAY_BLOCK
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*  -->  p1        text
*  <--  p2        text
*----------------------------------------------------------------------*
FORM DISPLAY_BLOCK .

CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
  EXPORTING
    I_CALLBACK_PROGRAM             = SY-REPID
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
          .



          CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
            EXPORTING
              IS_LAYOUT                        = ILAYOUT
              IT_FIELDCAT                      = IFIELDCATEKKO
              I_TABNAME                        = 'IEKKO'
              IT_EVENTS                        = IEVENTHEAD
*             IT_SORT                          =
*             I_TEXT                           = ' '
            TABLES
              T_OUTTAB                         = IEKKO
           EXCEPTIONS
             PROGRAM_ERROR                    = 1
             MAXIMUM_OF_APPENDS_REACHED       = 2
             OTHERS                           = 3
                    .
          IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.


CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
  EXPORTING
    IS_LAYOUT                        = ILAYOUT
    IT_FIELDCAT                      = IFIELDCATEKPO
    I_TABNAME                        = 'IEKPO'
    IT_EVENTS                        = IEVENTITEM
*   IT_SORT                          =
*   I_TEXT                           = ' '
  TABLES
    T_OUTTAB                         = IEKPO
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
          .
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.


CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
* EXPORTING
*   I_INTERFACE_CHECK             = ' '
*   IS_PRINT                      =
*   I_SCREEN_START_COLUMN         = 0
*   I_SCREEN_START_LINE           = 0
*   I_SCREEN_END_COLUMN           = 0
*   I_SCREEN_END_LINE             = 0
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER       =
*   ES_EXIT_CAUSED_BY_USER        =
 EXCEPTIONS
   PROGRAM_ERROR                 = 1
   OTHERS                        = 2
          .
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.


ENDFORM.                    " DISPLAY_BLOCK
*&---------------------------------------------------------------------*
*&      Form  BUILD_FCAT_HEAD
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*  -->  p1        text
*  <--  p2        text
*----------------------------------------------------------------------*
FORM BUILD_FCAT_HEAD .
WFIELDCAT-FIELDNAME = 'EBELN'.
WFIELDCAT-TABNAME   = 'IEKKO'.
WFIELDCAT-SELTEXT_L = 'Pur. Doc no'.
WFIELDCAT-OUTPUTLEN = 15.
APPEND WFIELDCAT TO IFIELDCATEKKO.
CLEAR WFIELDCAT.


WFIELDCAT-FIELDNAME = 'AEDAT'.
WFIELDCAT-TABNAME   = 'IEKKO'.
WFIELDCAT-SELTEXT_L = 'Pur. doc date'.
WFIELDCAT-OUTPUTLEN = 15.
APPEND WFIELDCAT TO IFIELDCATEKKO.
CLEAR WFIELDCAT.

ENDFORM.                    " BUILD_FCAT_HEAD
*&---------------------------------------------------------------------*
*&      Form  BUILD_FCAT_ITEM
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*  -->  p1        text
*  <--  p2        text
*----------------------------------------------------------------------*
FORM BUILD_FCAT_ITEM .
WFIELDCAT-FIELDNAME = 'EBELN'.
WFIELDCAT-TABNAME   = 'IEKPO'.
WFIELDCAT-SELTEXT_L = 'Pur. Doc no'.
WFIELDCAT-OUTPUTLEN = 15.
APPEND WFIELDCAT TO IFIELDCATEKPO.
CLEAR WFIELDCAT.

WFIELDCAT-FIELDNAME = 'EBELP'.
WFIELDCAT-TABNAME   = 'IEKPO'.
WFIELDCAT-SELTEXT_L = 'Pur. Doc item'.
*wfieldcat-do_sum = 'X'.
WFIELDCAT-OUTPUTLEN = 15.
APPEND WFIELDCAT TO IFIELDCATEKPO.
CLEAR WFIELDCAT.

WFIELDCAT-FIELDNAME = 'MATNR'.
WFIELDCAT-TABNAME   = 'IEKPO'.
WFIELDCAT-SELTEXT_L = 'Material no'.
WFIELDCAT-OUTPUTLEN = 18.
APPEND WFIELDCAT TO IFIELDCATEKPO.
CLEAR WFIELDCAT.

WFIELDCAT-FIELDNAME = 'MENGE'.
WFIELDCAT-TABNAME   = 'IEKPO'.
WFIELDCAT-SELTEXT_L = 'P.O. Qty'.
wfieldcat-do_sum = 'X'.
*WFIELDCAT-DATATYPE = 'QUAN'.
WFIELDCAT-OUTPUTLEN = 15.
APPEND WFIELDCAT TO IFIELDCATEKPO.
CLEAR WFIELDCAT.

WFIELDCAT-FIELDNAME = 'MEINS'.
WFIELDCAT-TABNAME   = 'IEKPO'.
WFIELDCAT-SELTEXT_L = 'UOM'.
WFIELDCAT-OUTPUTLEN = 3.
APPEND WFIELDCAT TO IFIELDCATEKPO.
CLEAR WFIELDCAT.

ENDFORM.                    " BUILD_FCAT_ITEM
*&---------------------------------------------------------------------*
*&      Form  BUILD_LAYOUT
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*  -->  p1        text
*  <--  p2        text
*----------------------------------------------------------------------*
FORM BUILD_LAYOUT .
ILAYOUT-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM.                    " BUILD_LAYOUT
*&---------------------------------------------------------------------*
*&      Form  BUILD_EVENT_TAB
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*  -->  p1        text
*  <--  p2        text
*----------------------------------------------------------------------*
FORM BUILD_EVENT_TAB .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
   I_LIST_TYPE           = 0
 IMPORTING
   ET_EVENTS             = IEVENTHEAD
* EXCEPTIONS
*   LIST_TYPE_WRONG       = 1
*   OTHERS                = 2
          .
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

IEVENTITEM = IEVENTHEAD.

READ TABLE IEVENTHEAD INTO WEVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
WEVENT-FORM = 'TOPOFPAGEHEAD'.
MODIFY IEVENTHEAD FROM WEVENT INDEX SY-TABIX.
ENDIF.

READ TABLE IEVENTITEM INTO WEVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
WEVENT-FORM = 'TOPOFPAGEITEM'.
MODIFY IEVENTITEM FROM WEVENT INDEX SY-TABIX.
ENDIF.


ENDFORM.                    " BUILD_EVENT_TAB

FORM TOPOFPAGEHEAD.
DATA : ILIST TYPE SLIS_T_LISTHEADER,
       WLIST TYPE SLIS_LISTHEADER.

WLIST-INFO = 'Header data with P.O. no and creating date'.
WLIST-TYP  = 'H'.
APPEND WLIST TO ILIST.

CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
  EXPORTING
    IT_LIST_COMMENTARY       = ILIST
*   I_LOGO                   =
*   I_END_OF_LIST_GRID       =
          .


ENDFORM.

FORM TOPOFPAGEITEM.
DATA : ILIST TYPE SLIS_T_LISTHEADER,
       WLIST TYPE SLIS_LISTHEADER.

WLIST-INFO = 'Item data with P.O.item material no and qty'.
WLIST-TYP  = 'H'.
APPEND WLIST TO ILIST.

CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
  EXPORTING
    IT_LIST_COMMENTARY       = ILIST
*   I_LOGO                   =
*   I_END_OF_LIST_GRID       =
          .


ENDFORM.

regards

shiba dutta

[Former Member]

Hi,

You can do it by using Blocked ALV.

Check this sample code.

REPORT ZBLOCKED_ALV .

tables: lfa1,kna1.

select-options: s_kunnr for kna1-kunnr,

s_lifnr for lfa1-lifnr.

data: begin of itab occurs 0,

kunnr like kna1-kunnr,

name1 like kna1-name1,

land1 like kna1-land1,

end of itab.

data: begin of jtab occurs 0,

lifnr like lfa1-lifnr ,

land1 like lfa1-land1 ,

name1 like lfa1-name1,

end of jtab.

type-pools: slis.

data: repid like sy-repid,

kna1_b type slis_t_fieldcat_alv,

layout type slis_layout_alv,

events_b type slis_t_event.

repid = sy-repid.

select kunnr land1 name1 from kna1 into table itab where kunnr in

s_kunnr.

select lifnr land1 name1 from lfa1 into table jtab where lifnr in

s_lifnr.

• this FM is used initialize the blocks means activating blocks prior

to display v need to activate it

CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'

EXPORTING

I_CALLBACK_PROGRAM = repid.

• I_CALLBACK_PF_STATUS_SET = ' '

• I_CALLBACK_USER_COMMAND = ' '

• IT_EXCLUDING =

perform appendblock tables itab using 'ITAB'.

perform appendblock tables jtab using 'JTAB'.

• Fm which can display the blocks in layout

CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'

• EXPORTING

• I_INTERFACE_CHECK = ' '

• IS_PRINT =

• I_SCREEN_START_COLUMN = 0

• I_SCREEN_START_LINE = 0

• I_SCREEN_END_COLUMN = 0

• I_SCREEN_END_LINE = 0

• IMPORTING

• E_EXIT_CAUSED_BY_CALLER =

• ES_EXIT_CAUSED_BY_USER =

• EXCEPTIONS

• PROGRAM_ERROR = 1

• OTHERS = 2

.

IF SY-SUBRC <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

form appendblock tables jtab using itab.

refresh kna1_b.

CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'

EXPORTING

I_PROGRAM_NAME = repid

I_INTERNAL_TABNAME = itab

• I_STRUCTURE_NAME =

• I_CLIENT_NEVER_DISPLAY = 'X'

I_INCLNAME = repid

• I_BYPASSING_BUFFER =

• I_BUFFER_ACTIVE =

CHANGING

CT_FIELDCAT = kna1_b

• EXCEPTIONS

• INCONSISTENT_INTERFACE = 1

• PROGRAM_ERROR = 2

• OTHERS = 3

.

IF SY-SUBRC <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

• logic for appending vendor block to customer block

CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'

EXPORTING

IS_LAYOUT = layout

IT_FIELDCAT = kna1_b

I_TABNAME = itab

IT_EVENTS = events_b

• IT_SORT =

• I_TEXT = ' '

TABLES

T_OUTTAB = jtab

• EXCEPTIONS

• PROGRAM_ERROR = 1

• MAXIMUM_OF_APPENDS_REACHED = 2

• OTHERS = 3

.

IF SY-SUBRC <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

endform.

[Former Member]

HI,

see this program

TABLES:LFA1,EKKO.

SELECT-OPTIONS:LIFNR FOR LFA1-LIFNR.

DATA:BEGIN OF ITAB OCCURS 0,

LIFNR LIKE LFA1-LIFNR,

NAME1 LIKE LFA1-NAME1,

LAND1 LIKE LFA1-LAND1,

ORT01 LIKE LFA1-ORT01,

REGIO LIKE LFA1-REGIO,

END OF ITAB.

DATA:BEGIN OF JTAB OCCURS 0,

LIFNR LIKE EKKO-LIFNR,

EBELN LIKE EKKO-EBELN,

BUKRS LIKE EKKO-BUKRS,

BSTYP LIKE EKKO-BSTYP,

EKORG LIKE EKKO-EKORG,

BSART LIKE EKKO-BSART,

END OF JTAB.

SELECT * FROM LFA1 INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE LIFNR

IN LIFNR.

SELECT * FROM EKKO INTO CORRESPONDING FIELDS OF TABLE JTAB WHERE LIFNR

IN LIFNR.

TYPE-POOLS:SLIS.

DATA:LAYOUT TYPE slis_layout_alv.

DATA:EVE TYPE slis_t_event WITH HEADER LINE.

DATA:EVE1 TYPE slis_t_event WITH HEADER LINE.

DATA:HEAD TYPE slis_t_listheader WITH HEADER LINE.

DATA:FCAT TYPE slis_t_fieldcat_alv.

DATA:FCAT1 TYPE slis_t_fieldcat_alv.

LAYOUT-ZEBRA = 'X'.

LAYOUT-colwidth_optimize = 'X'.

LAYOUT-WINDOW_TITLEBAR = 'VENDOR DETAILS SCREEN'.

EVE1-NAME = 'TOP_OF_PAGE'.

EVE1-FORM = 'TOP_OF_PAGE1'.

APPEND EVE1.

CALL FUNCTION 'REUSE_ALV_EVENTS_GET'

EXPORTING

I_LIST_TYPE = 0

IMPORTING

ET_EVENTS = EVE[].

READ TABLE EVE WITH KEY NAME = 'TOP_OF_PAGE'.

EVE-FORM = 'TOP_OF_PAGE'.

MODIFY EVE TRANSPORTING FORM WHERE NAME = 'TOP_OF_PAGE'.

CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'

EXPORTING

I_CALLBACK_PROGRAM = SY-REPID.

CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'

EXPORTING

I_PROGRAM_NAME = SY-REPID

I_INTERNAL_TABNAME = 'ITAB'

I_INCLNAME = SY-REPID

CHANGING

CT_FIELDCAT = FCAT.

CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'

EXPORTING

IS_LAYOUT = LAYOUT

IT_FIELDCAT = FCAT

I_TABNAME = 'ITAB'

IT_EVENTS = EVE[]

TABLES

T_OUTTAB = ITAB .

CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'

EXPORTING

I_PROGRAM_NAME = SY-REPID

I_INTERNAL_TABNAME = 'JTAB'

I_INCLNAME = SY-REPID

CHANGING

CT_FIELDCAT = FCAT1.

CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'

EXPORTING

IS_LAYOUT = LAYOUT

IT_FIELDCAT = FCAT1

I_TABNAME = 'JTAB'

IT_EVENTS = EVE1[]

TABLES

T_OUTTAB = JTAB.

CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY' .

FORM TOP_OF_PAGE.

REFRESH HEAD.

HEAD-TYP = 'H'.

HEAD-INFO = 'VENDORS DETAILS'.

APPEND HEAD.

CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'

EXPORTING

IT_LIST_COMMENTARY = HEAD[].

ENDFORM.

FORM TOP_OF_PAGE1.

REFRESH HEAD.

HEAD-TYP = 'H'.

HEAD-INFO = 'PURCHASE DOCCUMENTS DETAILS'.

APPEND HEAD.

CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'

EXPORTING

IT_LIST_COMMENTARY = HEAD[].

ENDFORM.

rgds,

bharat.

[Former Member]

1.

Technically ALV is a tool to display Internal table data.

2.

ALV reports are max 4 types

a.

Simple ALV and GRID ALV

REUSE_ALV_LIST_DISPLAY

REUSE_ALV_GRID_DISPLAY

b.

Hierarchical ALV

REUSE_ALV_HIERSEQ_LIST_DISPLAYc.

Blocked ALV

REUSE_ALV_BLOCK_LIST_INIT

REUSE_ALV_BLOCK_LIST_APPEND

REUSE_ALV_BLOCK_LIST_DISPLAY

d.

Blocked Hierarchical ALV

REUSE_ALV_BLOCK_LIST_HS_APPEND.

3.

SLIS is a TYPE-GROUP that is defined in SE11 under

Type-group.All ALV related Internal table are defined there if we want access those ,we have to declare that type-group in our program as TYPE-POOLS.

4.

For Documentation on Function modules.

Go to SE37=>give any of FM =>Display=> Function module Documentation Button is Hilighted.

and Importing and exporting parameters documentaion is available next to that parameters with GREEN light.

5.

For more Function modules Search with REUSE_*

6.

For std example programs on the system.

Search with BALV*

7.

For example programs on the net ,

http://www.geocities.com/mpioud/Abap_programs.html

8.

For SAP documentation on the net

a.

http://help.sap.com/saphelp_47x200/helpdata/en/51/055134de05a662e10000009b38f83b/frameset.htm

b.

http://help.sap.com/saphelp_47x200/helpdata/en/c5/3bd1369f2d280ee10000009b38f889/frameset.htm

But 'a' type are only mostly used

go through the few simple programs available in the below links to have a clear understanding.

http://www.sapdevelopment.co.uk/reporting/alv/alvgrid.htm

http://www.sapdevelopment.co.uk/reporting/alv/alvlist.htm

<b><u>Kindly Dont Forget to award points</u></b> Sudheer