- SAP Managed Tags:
Disclaimer: This is a proposal of an SCN Member and not an authorized solution by SAP. Pls. be aware what you do!
Motivation
In my Post I pointed out the Issue that #adt can not handle #csol warnings as #SE80 can. I described a workaround using #SE80 and another using a dirty technique in solutionamanger.
For us in the project this was not sufficient.
The goal is to "auto confirm" the CSOL warnings as we can do in #SE80. Due to project requirements this would be the only way in any case at the moment.
---- EDIT 04.07.2016 -----
This Note : 1591120 will also help you. You can change the priority of the CSOL Messages.
This helped us in same issues with SPROXY and in CRM Tools.
Durch diese Customizing-Option wird festgelegt, wie das System nach einer Sperrkonfliktwarnung reagierensoll.
Wenn Sie z.B. Änderungen an einem Transportauftrag sichern, liefert die Sperrkonfliktberechnung durch
die CSOL drei Ergebnisse:
Wenn keine Konflikte vorliegen, sichert das System die Änderungen.
Wenn Konflikte der Konfliktart "Fehler" vorliegen, meldet die Anwendung einen Fehler.
Wenn ein Konflikt der allgemeinen Konfliktart "Warnung" vorliegt, hängt der weitere Prozess vom Wert
im Feld CSOL_WAR_DIA_FREE_STRATEGY ab:
Beim Wert CANCEL_WARNING wird das Sichern abgebrochen und gemeldet.
Beim Wert IGNORE_WARNING wird das Sichern fortgesetzt und kein Fehler gemeldet. Außerdem werden
Sperreinträge vorgenommen.
Wenn der Customizing-Eintrag CSOL_WAR_DIA_FREE_STRATEGY nicht hinzugefügt wird, entspricht das
Standardverhalten der Einstellung CANCEL_WARNING.
We removed the enhancement listed here again.
---- END EDIT ----
You can solve this using two Enhancements and a helper class:
Create helper-class:
CLASS zcl_000_adt_service DEFINITION
PUBLIC
CREATE PUBLIC.
PUBLIC SECTION.
CLASS-DATA:
sv_adt_call TYPE abap_bool VALUE abap_false,
sv_csol_check_called TYPE abap_bool VALUE abap_false.
PROTECTED SECTION.
PRIVATE SECTION.
ENDCLASS.
CLASS ZCL_000_ADT_SERVICE IMPLEMENTATION.
ENDCLASS.
Detect if called via ATD in SADT_REST_RFC_ENDPOINT
Create an enhancement at the top of SADT_REST_RFC_ENDPOINT:
ENHANCEMENT 1 Z_SADT_REST_RFC_ENDPOINT. "active version
**********************************************************************
* Enhancement to register an ADT call.
**********************************************************************
LOG-POINT ID z000_sap_code_enhancement SUBKEY sy-cprog FIELDS 'Z_SADT_REST_RFC_ENDPOINT'. "Optional
zcl_000_adt_service=>sv_adt_call = abap_true.
ENDENHANCEMENT.
Catch the CSOL message in function module TMW_PRJL_CSOL_CHECK when called from #adt
We did not want to do real modification, such that we used a recursive call within the enhancement of TMW_PRJL_CSOL_CHECK. After the recursion we can catch the message if we are called via #adt an ignore it. Create an enhancement at the top:
ENHANCEMENT 1 Z_TMW_PRJL_CSOL_CHECK. "active version
**********************************************************************
* Because the confirmation of CSOLocks is still not possible via ADT/Eclipse
* this enhancement helps on an interim basis.
*
* IF a CSOL conflict occurs the Solution Manager (second call of function
* module /TMWFLOW/CHECK_OBJECT_LOCK_CSL) returns a specific message. This
* message will be raised as LOCKING_NOT_ALLOWED.
*
* The conflict will be confirmed with including the object to a transport
* request which is known by the Solution Manager. So catching the specific
* message by a recursive call (depth 2) and ignoring it will cause an
* automatic CSOL conflict confirmation.
*
* To differ a call of function module TMW_PRJL_CSOL_CHECK by Eclipse/ADT and
* by an se80 session there is a flag, which is set by an enhancement of
* function module SADT_REST_RFC_ENDPOINT.
**********************************************************************
" LOG-POINT ID z000_sap_code_enhancement SUBKEY sy-cprog FIELDS 'Z_TMW_PRJL_CSOL_CHECK'. Optional
IF zcl_000_adt_service=>sv_adt_call = abap_true AND
zcl_000_adt_service=>sv_csol_check_called = abap_false.
"AND
" new zcl_001_user_service( )->is_user_parameter_set( 'Z_AUTO_CSOL_CONFIRM' ) = abap_true. "Nice to have
zcl_000_adt_service=>sv_csol_check_called = abap_true. "stop recursion
CALL FUNCTION 'TMW_PRJL_CSOL_CHECK'
EXPORTING
iv_request = iv_request
iv_suppress_dialog = iv_suppress_dialog
it_objects = it_objects
it_keys = it_keys
iv_trfunction = iv_trfunction
IMPORTING
ev_no_check_performed = ev_no_check_performed
EXCEPTIONS
locking_not_allowed = 1
warning_conflicts_exist = 2
OTHERS = 1.
zcl_000_adt_service=>sv_csol_check_called = abap_false.
CASE sy-subrc.
WHEN 0.
RETURN.
WHEN 1.
IF sy-msgid = '00' AND sy-msgty = 'E' AND sy-msgno = '001' AND
( sy-langu = 'E' AND sy-msgv1 = 'Customizable CSOL conflict for objects changed in' AND sy-msgv2 = ' other TR (Note 1591120)' ) OR
( sy-langu = 'D' AND sy-msgv1 = 'Anpassbarer CSOL-Konflikt für in and. TA geänderte' AND sy-msgv2 = ' Objekte (Hinw. 1591120' ).
"ignore/accept CSOL conflict => confirm CSOL conflict
RETURN.
ENDIF.
"re-raise
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 RAISING locking_not_allowed.
WHEN 2.
"re-raise
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 RAISING warning_conflicts_exist.
ENDCASE.
ENDIF.
ENDENHANCEMENT.
Additional
in the line:
" new zcl_001_user_service( )->is_user_parameter_set( 'Z_AUTO_CSOL_CONFIRM' ) = abap_true.
we placed some code to ensure that the auto confirm of #csol is only done for user who have set the set/get parameter accordingly.
This is what the coding does.
Conclusion
Now we have a #adt that "confirms" CSOL warnings immediately such that we can continue to work as normal in #adt.
thomasfiedler and the ATD Team are aware of this issue and are working on a standard solution.
Be aware of the disclaimer at the top.
Kind Regards
Timo
2 Comments
| User | Count |
|---|---|
| 5 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 2 | |
| 1 |
