using bdc to upload the data in internal table

[Former Member]

hi

using bdc to upload the data in internal table using these commands

1.bdc_open_group

2.bdc_insert

3.bdc_close_group

[Former Member]

hi

using bdc to upload the data in internal table using these commands

1.bdc_open_group

2.bdc_insert

3.bdc_close_group

[Former Member]

Hi Senthi,

Check out this link:

http://www.sap-img.com/ab001.htm

Reward if useful!

[Former Member]

Check this code it may help u.

REPORT z_nvk_bdc_tbl NO STANDARD PAGE HEADING LINE-SIZE 255.

*INCLUDE bdcrecx1.

• DO NOT CHANGE - the generated data section - DO NOT CHANGE ***

*

• If it is nessesary to change the data section use the rules:

• 1.) Each definition of a field exists of two lines

• 2.) The first line shows exactly the comment

• '* data element: ' followed with the data element

• which describes the field.

• If you don't have a data element use the

• comment without a data element name

• 3.) The second line shows the fieldname of the

• structure, the fieldname must consist of

• a fieldname and optional the character '_' and

• three numbers and the field length in brackets

• 4.) Each field must be type C.

*

• Generated data section with specific formatting - DO NOT CHANGE ***

DATA: BEGIN OF record OCCURS 0,

• data element: LIF16

lifnr_001(016),

• data element: BUKRS

bukrs_002(004),

• data element: KTOKK

ktokk_003(004),

• data element: ANRED

anred_004(015),

• data element: NAME1_GP

name1_005(035),

• data element: SORTL

sortl_006(010),

• data element: LAND1_GP

land1_007(003),

• data element: KUNNR

kunnr_008(010),

• data element: BANKS

banks_01_009(003),

• data element: BANKK

bankl_01_010(015),

• data element: BANKN

bankn_01_011(018),

• data element: AKONT

akont_012(010),

• data element: FDGRV

fdgrv_013(010),

END OF record.

DATA: IT_BDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.

DATA: V_BANKS(14), V_BANKL(14), V_BANKN(14), V_NUMC(2) TYPE N,

V_TABIX LIKE SY-TABIX.

• End generated data section ***

START-OF-SELECTION.

perform upload_data.

PERFORM open_group.

SORT RECORD BY LIFNR_001.

LOOP AT RECORD.

V_TABIX = SY-TABIX.

AT NEW KUNNR_008.

REFRESH IT_BDC.

CLEAR V_NUMC.

PERFORM bdc_dynpro USING 'SAPMF02K' '0105'.

PERFORM bdc_field USING 'BDC_CURSOR'

'RF02K-KTOKK'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'RF02K-LIFNR'

record-lifnr_001.

PERFORM bdc_field USING 'RF02K-BUKRS'

record-bukrs_002.

PERFORM bdc_field USING 'RF02K-KTOKK'

record-ktokk_003.

PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFA1-LAND1'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'LFA1-ANRED'

record-anred_004.

PERFORM bdc_field USING 'LFA1-NAME1'

record-name1_005.

PERFORM bdc_field USING 'LFA1-SORTL'

record-sortl_006.

PERFORM bdc_field USING 'LFA1-LAND1'

record-land1_007.

PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFA1-KUNNR'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'LFA1-KUNNR'

record-kunnr_008.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFBK-BANKN(01)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

ENDAT.

V_NUMC = V_NUMC + 1.

CONCATENATE 'LFBK-BANKS(' V_NUMC ')' INTO V_BANKS.

CONCATENATE 'LFBK-BANKL(' V_NUMC ')' INTO V_BANKL.

CONCATENATE 'LFBK-BANKN(' V_NUMC ')' INTO V_BANKN.

PERFORM bdc_field USING V_BANKS

record-banks_01_009.

PERFORM bdc_field USING V_BANKL

record-bankl_01_010.

PERFORM bdc_field USING V_BANKN

record-bankn_01_011.

AT END OF KUNNR_008.

READ TABLE RECORD INDEX V_TABIX.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFBK-BANKS(01)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFB1-FDGRV'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=UPDA'.

PERFORM bdc_field USING 'LFB1-AKONT'

record-akont_012.

PERFORM bdc_field USING 'LFB1-FDGRV'

record-fdgrv_013.

PERFORM bdc_transaction USING 'FK01'.

ENDAT.

ENDLOOP.

PERFORM close_group.

----

---

• Start new screen *

----

---

FORM BDC_DYNPRO USING PROGRAM DYNPRO.

CLEAR IT_BDC.

IT_BDC-PROGRAM = PROGRAM.

IT_BDC-DYNPRO = DYNPRO.

IT_BDC-DYNBEGIN = 'X'.

APPEND IT_BDC.

ENDFORM.

----

---

• Insert field *

----

---

FORM BDC_FIELD USING FNAM FVAL.

IF FVAL <> ' '.

CLEAR IT_BDC.

IT_BDC-FNAM = FNAM.

IT_BDC-FVAL = FVAL.

APPEND IT_BDC.

ENDIF.

ENDFORM.

&----

---

*& Form upload_data

&----

---

form upload_data .

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

• CODEPAGE = ' '

FILENAME = 'c:\bank.txt'

FILETYPE = 'ASC'

• HEADLEN = ' '

• LINE_EXIT = ' '

• TRUNCLEN = ' '

• USER_FORM = ' '

• USER_PROG = ' '

• DAT_D_FORMAT = ' '

• IMPORTING

• FILELENGTH =

TABLES

data_tab = record

• EXCEPTIONS

• CONVERSION_ERROR = 1

• FILE_OPEN_ERROR = 2

• FILE_READ_ERROR = 3

• INVALID_TYPE = 4

• NO_BATCH = 5

• UNKNOWN_ERROR = 6

• INVALID_TABLE_WIDTH = 7

• GUI_REFUSE_FILETRANSFER = 8

• CUSTOMER_ERROR = 9

• NO_AUTHORITY = 10

• OTHERS = 11

.

IF sy-subrc <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

endform. " upload_data

&----

---

*& Form open_group

&----

---

form open_group .

CALL FUNCTION 'BDC_OPEN_GROUP'

EXPORTING

CLIENT = SY-MANDT

• DEST = FILLER8

GROUP = 'Z_NVK_TBL'

• HOLDDATE = FILLER8

KEEP = 'X'

USER = SY-UNAME

• RECORD = FILLER1

PROG = SY-CPROG

• IMPORTING

• QID =

EXCEPTIONS

CLIENT_INVALID = 1

DESTINATION_INVALID = 2

GROUP_INVALID = 3

GROUP_IS_LOCKED = 4

HOLDDATE_INVALID = 5

INTERNAL_ERROR = 6

QUEUE_ERROR = 7

RUNNING = 8

SYSTEM_LOCK_ERROR = 9

USER_INVALID = 10

OTHERS = 11

.

IF sy-subrc <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

endform. " open_group

&----

---

*& Form close_group

&----

---

form close_group .

CALL FUNCTION 'BDC_CLOSE_GROUP'

EXCEPTIONS

NOT_OPEN = 1

QUEUE_ERROR = 2

OTHERS = 3

.

IF sy-subrc <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

endform. " close_group

&----

---

*& Form bdc_transaction

&----

---

• text

----

---

• -->P_0209 text

----

---

form bdc_transaction using T_CODE.

CALL FUNCTION 'BDC_INSERT'

EXPORTING

TCODE = T_CODE

• POST_LOCAL = NOVBLOCAL

• PRINTING = NOPRINT

• SIMUBATCH = ' '

• CTUPARAMS = ' '

TABLES

dynprotab = IT_BDC

• EXCEPTIONS

• INTERNAL_ERROR = 1

• NOT_OPEN = 2

• QUEUE_ERROR = 3

• TCODE_INVALID = 4

• PRINTING_INVALID = 5

• POSTING_INVALID = 6

• OTHERS = 7

.

IF sy-subrc <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

endform.

Regards

[Former Member]

It has the following 3 function modules with detailed parameter passed to it .

<b>

1.bdc_open_group

2.bdc_insert

3.bdc_close_group</b>

***INCLUDE ZBDCRECX1. 
*  When you generate the program using SHDB, you can replace it 
*  with this if you want to execute it immediately without having 
*  to process it using SM35. 
* 
*  During testing you can used the original include. 
* 
*  For example, 
*  include zbdcrecx1.   "After test 
*  include bdcrecx.     "Before test 
*  ------------------------------------- 
*  Declare your internal table as RECORD 
*  ------------------------------------- 
*  for programs doing a data transfer by creating a batch-input session 
*  and 
*  for programs doing a data transfer by CALL TRANSACTION USING 

*SELECTION-SCREEN BEGIN OF LINE. 
*  PARAMETERS SESSION RADIOBUTTON GROUP CTU.  "create session 
*  SELECTION-SCREEN COMMENT 3(20) TEXT-S07 FOR FIELD SESSION. 
*  selection-screen position 45. 
*  PARAMETERS CTU RADIOBUTTON GROUP CTU DEFAULT 'X'. "call transaction 
*  SELECTION-SCREEN COMMENT 48(20) TEXT-S08 FOR FIELD CTU. 
*SELECTION-SCREEN END OF LINE. 
PARAMETERS: SESSION NO-DISPLAY, 
            CTU     NO-DISPLAY DEFAULT 'X'. 

*SELECTION-SCREEN BEGIN OF LINE. 
*  SELECTION-SCREEN COMMENT 3(20) TEXT-S01 FOR FIELD GROUP. 
*  selection-screen position 25. 
*  PARAMETERS GROUP(12).                      "group name of session 
*  SELECTION-SCREEN COMMENT 48(20) TEXT-S05 FOR FIELD CTUMODE. 
*  selection-screen position 70. 
*  PARAMETERS CTUMODE LIKE CTU_PARAMS-DISMODE DEFAULT 'N'. 
*                                      "A: show all dynpros 
*                                      "E: show dynpro on error only 
*                                      "N: do not display dynpro 
*SELECTION-SCREEN END OF LINE. 
PARAMETERS: GROUP(12) NO-DISPLAY, 
            CTUMODE   NO-DISPLAY DEFAULT 'N'. 

*SELECTION-SCREEN BEGIN OF LINE. 
*  SELECTION-SCREEN COMMENT 3(20) TEXT-S02 FOR FIELD USER. 
*  selection-screen position 25. 
*  PARAMETERS: USER(12) DEFAULT SY-UNAME.    "user for session in batch 
*  SELECTION-SCREEN COMMENT 48(20) TEXT-S06 FOR FIELD CUPDATE. 
*  selection-screen position 70. 
*  PARAMETERS CUPDATE LIKE CTU_PARAMS-UPDMODE DEFAULT 'L'. 
*                                      "S: synchronously 
*                                      "A: asynchronously 
*                                      "L: local 
*SELECTION-SCREEN END OF LINE. 
PARAMETERS: USER(12) NO-DISPLAY DEFAULT SY-UNAME, 
            CUPDATE LIKE CTU_PARAMS-UPDMODE DEFAULT 'L' NO-DISPLAY. 

*SELECTION-SCREEN BEGIN OF LINE. 
*  SELECTION-SCREEN COMMENT 3(20) TEXT-S03 FOR FIELD KEEP. 
*  selection-screen position 25. 
*  PARAMETERS: KEEP AS CHECKBOX.       "' ' = delete session if finished 
*                                      "'X' = keep   session if finished 
*  SELECTION-SCREEN COMMENT 48(20) TEXT-S09 FOR FIELD E_GROUP. 
*  selection-screen position 70. 
*  parameters E_GROUP(12).             "group name of error-session 
*SELECTION-SCREEN END OF LINE. 
PARAMETERS: KEEP        NO-DISPLAY, 
            E_GROUP(12) NO-DISPLAY. 

*SELECTION-SCREEN BEGIN OF LINE. 
*  SELECTION-SCREEN COMMENT 3(20) TEXT-S04 FOR FIELD HOLDDATE. 
*  selection-screen position 25. 
*  PARAMETERS: HOLDDATE LIKE SY-DATUM. 
*  SELECTION-SCREEN COMMENT 51(17) TEXT-S02 FOR FIELD E_USER. 
*  selection-screen position 70. 
*  PARAMETERS: E_USER(12) DEFAULT SY-UNAME.    "user for error-session 
*SELECTION-SCREEN END OF LINE. 
PARAMETERS: HOLDDATE LIKE SY-DATUM NO-DISPLAY, 
           E_USER(12) DEFAULT SY-UNAME NO-DISPLAY. 

*SELECTION-SCREEN BEGIN OF LINE. 
*  SELECTION-SCREEN COMMENT 51(17) TEXT-S03 FOR FIELD E_KEEP. 
*  selection-screen position 70. 
*  PARAMETERS: E_KEEP AS CHECKBOX.     "' ' = delete session if finished 
*                                      "'X' = keep   session if finished 
*SELECTION-SCREEN END OF LINE. 
PARAMETERS: E_KEEP NO-DISPLAY. 

*SELECTION-SCREEN BEGIN OF LINE. 
*  SELECTION-SCREEN COMMENT 51(17) TEXT-S04 FOR FIELD E_HDATE. 
*  selection-screen position 70. 
*  PARAMETERS: E_HDATE LIKE SY-DATUM. 
*SELECTION-SCREEN END OF LINE. 
* 
*SELECTION-SCREEN SKIP. 
PARAMETERS: E_HDATE LIKE SY-DATUM NO-DISPLAY. 

*SELECTION-SCREEN BEGIN OF LINE. 
*  SELECTION-SCREEN COMMENT 1(33) TEXT-S10 FOR FIELD NODATA. 
*  PARAMETERS: NODATA DEFAULT '/' LOWER CASE.          "nodata 
*SELECTION-SCREEN END OF LINE. 
PARAMETERS: NODATA DEFAULT '/' LOWER CASE NO-DISPLAY. 

*SELECTION-SCREEN BEGIN OF LINE. 
*  SELECTION-SCREEN COMMENT 1(33) FOR FIELD SMALLLOG. 
*  PARAMETERS: SMALLLOG as checkbox.  "' ' = log all transactions 
*                                     "'X' = no transaction logging 
*SELECTION-SCREEN END OF LINE. 
PARAMETERS: SMALLLOG NO-DISPLAY. 

*----------------------------------------------------------------------* 
*   data definition 
*----------------------------------------------------------------------* 
*       Batchinputdata of single transaction 
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE. 
*       messages of call transaction 
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE. 
*       error session opened (' ' or 'X') 
DATA:   E_GROUP_OPENED. 
*       message texts 
TABLES: T100. 
  

*----------------------------------------------------------------------* 
*   at selection screen                                                * 
*----------------------------------------------------------------------* 
AT SELECTION-SCREEN. 
* group and user must be filled for create session 
  IF SESSION = 'X' AND 
     GROUP = SPACE OR USER = SPACE. 
    MESSAGE E613(MS). 
  ENDIF. 

*----------------------------------------------------------------------* 
*   open dataset                                                       * 
*----------------------------------------------------------------------* 
FORM OPEN_DATASET USING P_DATASET. 
  OPEN DATASET P_DATASET IN TEXT MODE. 
  IF SY-SUBRC <> 0. 
    WRITE: / TEXT-E00, SY-SUBRC. 
    STOP. 
  ENDIF. 
ENDFORM. 

*----------------------------------------------------------------------* 
*   close dataset                                                      * 
*----------------------------------------------------------------------* 
FORM CLOSE_DATASET USING P_DATASET. 
  CLOSE DATASET P_DATASET. 
ENDFORM. 

*----------------------------------------------------------------------* 
*   create batchinput session                                          * 
*   (not for call transaction using...)                                * 
*----------------------------------------------------------------------* 
FORM OPEN_GROUP. 
  IF SESSION = 'X'. 
    SKIP. 
    WRITE: /(20) 'Create group'(I01), GROUP. 
    SKIP. 
*   open batchinput group 
    CALL FUNCTION 'BDC_OPEN_GROUP' 
         EXPORTING  CLIENT   = SY-MANDT 
                    GROUP    = GROUP 
                    USER     = USER 
                    KEEP     = KEEP 
                    HOLDDATE = HOLDDATE. 
    WRITE: /(30) 'BDC_OPEN_GROUP'(I02), 
            (12) 'returncode:'(I05), 
                 SY-SUBRC. 
  ENDIF. 
ENDFORM. 

*----------------------------------------------------------------------* 
*   end batchinput session                                             * 
*   (call transaction using...: error session)                         * 
*----------------------------------------------------------------------* 
FORM CLOSE_GROUP. 
  IF SESSION = 'X'. 
*   close batchinput group 
    CALL FUNCTION 'BDC_CLOSE_GROUP'. 
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04), 
            (12) 'returncode:'(I05), 
                 SY-SUBRC. 
  ELSE. 
    IF E_GROUP_OPENED = 'X'. 
      CALL FUNCTION 'BDC_CLOSE_GROUP'. 
      WRITE: /. 
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06). 
    ENDIF. 
  ENDIF. 
ENDFORM. 

*----------------------------------------------------------------------* 
*        Start new transaction according to parameters                 * 
*----------------------------------------------------------------------* 
FORM BDC_TRANSACTION USING TCODE. 
  DATA: L_MSTRING(480). 
  DATA: L_SUBRC LIKE SY-SUBRC. 
* batch input session 
  IF SESSION = 'X'. 
    CALL FUNCTION 'BDC_INSERT' 
         EXPORTING TCODE     = TCODE 
         TABLES    DYNPROTAB = BDCDATA. 
    IF SMALLLOG <> 'X'. 
      WRITE: / 'BDC_INSERT'(I03), 
               TCODE, 
               'returncode:'(I05), 
               SY-SUBRC, 
               'RECORD:', 
               SY-INDEX. 
    ENDIF. 
* call transaction using 
  ELSE. 
    REFRESH MESSTAB. 
    CALL TRANSACTION TCODE USING BDCDATA 
                     MODE   CTUMODE 
                     UPDATE CUPDATE 
                     MESSAGES INTO MESSTAB. 
    L_SUBRC = SY-SUBRC. 
    IF SMALLLOG <> 'X'. 
*      WRITE: / 'CALL_TRANSACTION', 
*               TCODE, 
*               'returncode:'(I05), 
*               L_SUBRC, 
*               'RECORD:', 
*               SY-INDEX. 
      IF SY-SUBRC = 0. 
         FORMAT COLOR OFF. 
         WRITE:/ 'Successfully Process ', MESSTAB, RECORD. 
      ELSE. 
         FORMAT COLOR COL_NEGATIVE. 
         WRITE:/ 'Failed Process ', MESSTAB, RECORD. 
      ENDIF. 
      LOOP AT MESSTAB. 
        SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA 
                                  AND   ARBGB = MESSTAB-MSGID 
                                  AND   MSGNR = MESSTAB-MSGNR. 
        IF SY-SUBRC = 0. 
          L_MSTRING = T100-TEXT. 
          IF L_MSTRING CS '&1'. 
            REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING. 
            REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING. 
            REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING. 
            REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING. 
          ELSE. 
            REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING. 
            REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING. 
            REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING. 
            REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING. 
          ENDIF. 
          CONDENSE L_MSTRING. 
          WRITE: / MESSTAB-MSGTYP, L_MSTRING(250). 
        ELSE. 
          WRITE: / MESSTAB. 
        ENDIF. 
      ENDLOOP. 
      SKIP. 
    ENDIF. 
** Erzeugen fehlermappe ************************************************ 
    IF L_SUBRC <> 0 AND E_GROUP <> SPACE. 
      IF E_GROUP_OPENED = ' '. 
        CALL FUNCTION 'BDC_OPEN_GROUP' 
             EXPORTING  CLIENT   = SY-MANDT 
                        GROUP    = E_GROUP 
                        USER     = E_USER 
                        KEEP     = E_KEEP 
                        HOLDDATE = E_HDATE. 
         E_GROUP_OPENED = 'X'. 
      ENDIF. 
      CALL FUNCTION 'BDC_INSERT' 
           EXPORTING TCODE     = TCODE 
           TABLES    DYNPROTAB = BDCDATA. 
    ENDIF. 
  ENDIF. 
  REFRESH BDCDATA. 
ENDFORM. 

*----------------------------------------------------------------------* 
*        Start new screen                                              * 
*----------------------------------------------------------------------* 
FORM BDC_DYNPRO USING PROGRAM DYNPRO. 
  CLEAR BDCDATA. 
  BDCDATA-PROGRAM  = PROGRAM. 
  BDCDATA-DYNPRO   = DYNPRO. 
  BDCDATA-DYNBEGIN = 'X'. 
  APPEND BDCDATA. 
ENDFORM. 

*----------------------------------------------------------------------* 
*        Insert field                                                  * 
*----------------------------------------------------------------------* 
FORM BDC_FIELD USING FNAM FVAL. 
  IF FVAL <> NODATA. 
    CLEAR BDCDATA. 
    BDCDATA-FNAM = FNAM. 
    BDCDATA-FVAL = FVAL. 
    APPEND BDCDATA. 
  ENDIF. 
ENDFORM.  

reward points if it is usefull .....

Girish