user exit for sd

[Former Member]

Hi Friends,

How many ways and what are steps to find user exits in sd.

Thanks

[Former Member]

Hi,

Use below program to find User-Exit.

You only need to insert your SD Tcode and it'll give list of available user-exit for that program.

report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.

select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.

            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.

at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.

*---End of Program

Regards,

[Former Member]

hi Asha,

Above program is used to findout the user exits for a standard sap tcode.....

If you want to find the screen exits then...

1. go to the transaction you are workin on.

2. go to system --> status and there you'l find your package name.

3. now go to SE81 --> info systems --> enhancements --> customer exits --> enhancements and give your package name there.

now you'l get your screen exit here.

if u want to find the field exits fallow the below navigation or use the below programs

REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.

TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.

TABLES : TSTCT.

DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.

DATA : FIELD1(30).

DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.

PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.

SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.

IF SY-SUBRC EQ 0.

SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'

AND OBJECT = 'PROG'

AND OBJ_NAME = TSTC-PGMNA.

MOVE : TADIR-DEVCLASS TO V_DEVCLASS.

IF SY-SUBRC NE 0.

SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.

IF TRDIR-SUBC EQ 'F'.

SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.

SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =

TFDIR-FUNCNAME.

SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'

AND OBJECT = 'FUGR'

AND OBJ_NAME EQ ENLFDIR-AREA.

MOVE : TADIR-DEVCLASS TO V_DEVCLASS.

ENDIF.

ENDIF.

SELECT * FROM TADIR INTO TABLE JTAB

WHERE PGMID = 'R3TR'

AND OBJECT = 'SMOD'

AND DEVCLASS = V_DEVCLASS.

SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND

TCODE EQ P_TCODE.

FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.

WRITE:/(19) 'Transaction Code - ',

20(20) P_TCODE,

45(50) TSTCT-TTEXT.

SKIP.

IF NOT JTAB[] IS INITIAL.

WRITE:/(95) SY-ULINE.

FORMAT COLOR COL_HEADING INTENSIFIED ON.

WRITE:/1 SY-VLINE,

2 'Exit Name',

21 SY-VLINE ,

22 'Description',

95 SY-VLINE.

WRITE:/(95) SY-ULINE.

LOOP AT JTAB.

SELECT SINGLE * FROM MODSAPT

WHERE SPRSL = SY-LANGU AND

NAME = JTAB-OBJ_NAME.

FORMAT COLOR COL_NORMAL INTENSIFIED OFF.

WRITE:/1 SY-VLINE,

2 JTAB-OBJ_NAME HOTSPOT ON,

21 SY-VLINE ,

22 MODSAPT-MODTEXT,

95 SY-VLINE.

ENDLOOP.

WRITE:/(95) SY-ULINE.

DESCRIBE TABLE JTAB.

SKIP.

FORMAT COLOR COL_TOTAL INTENSIFIED ON.

WRITE:/ 'No of Exits:' , SY-TFILL.

ELSE.

FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.

WRITE:/(95) 'No User Exit exists'.

ENDIF.

ELSE.

FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.

WRITE:/(95) 'Transaction Code Does Not Exist'.

ENDIF.

AT LINE-SELECTION.

GET CURSOR FIELD FIELD1.

CHECK FIELD1(4) EQ 'JTAB'.

SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).

CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

*************************************************************

or

1. in se11, goto table MODSAP

View table contents

2. in Type field, enter 'E' (for function exit)

3. For that tcode, u should know the program name.

eg. SAPLLMOB

4. then type SAPLLMOB and execute

or

REPORT z34331_user_exit .

TABLES : tstc, "SAP Transaction Codes

tadir, "Directory of Repository Objects

modsapt, "SAP Enhancements - Short Texts

modact, "Modifications

trdir, "System table TRDIR

tfdir, "Function Module

enlfdir, "Additional Attributes for Function Modules

tstct. "Transaction Code Texts

DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.

DATA : field1(30).

DATA : v_devclass LIKE tadir-devclass.

SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.

SELECTION-SCREEN SKIP.

PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.

SELECTION-SCREEN SKIP.

SELECTION-SCREEN END OF BLOCK a01.

START-OF-SELECTION.

• Validate Transaction Code

SELECT SINGLE * FROM tstc

WHERE tcode EQ p_tcode.

• Find Repository Objects for transaction code

IF sy-subrc EQ 0.

SELECT SINGLE * FROM tadir

WHERE pgmid = 'R3TR'

AND object = 'PROG'

AND obj_name = tstc-pgmna.

MOVE : tadir-devclass TO v_devclass.

IF sy-subrc NE 0.

SELECT SINGLE * FROM trdir

WHERE name = tstc-pgmna.

IF trdir-subc EQ 'F'.

SELECT SINGLE * FROM tfdir

WHERE pname = tstc-pgmna.

SELECT SINGLE * FROM enlfdir

WHERE funcname = tfdir-funcname.

SELECT SINGLE * FROM tadir

WHERE pgmid = 'R3TR'

AND object = 'FUGR'

AND obj_name = enlfdir-area.

MOVE : tadir-devclass TO v_devclass.

ENDIF.

ENDIF.

• Find SAP Modifactions

SELECT * FROM tadir

INTO TABLE jtab

WHERE pgmid = 'R3TR'

AND object = 'SMOD'

AND devclass = v_devclass.

SELECT SINGLE * FROM tstct

WHERE sprsl EQ sy-langu

AND tcode EQ p_tcode.

FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.

WRITE:/(19) 'Transaction Code - ',

20(20) p_tcode,

45(50) tstct-ttext.

SKIP.

IF NOT jtab[] IS INITIAL.

WRITE:/(95) sy-uline.

FORMAT COLOR COL_HEADING INTENSIFIED ON.

WRITE:/1 sy-vline,

2 'Exit Name',

21 sy-vline ,

22 'Description',

95 sy-vline.

WRITE:/(95) sy-uline.

LOOP AT jtab.

SELECT SINGLE * FROM modsapt

WHERE sprsl = sy-langu AND

name = jtab-obj_name.

FORMAT COLOR COL_NORMAL INTENSIFIED OFF.

WRITE:/1 sy-vline,

2 jtab-obj_name HOTSPOT ON,

21 sy-vline ,

22 modsapt-modtext,

95 sy-vline.

ENDLOOP.

WRITE:/(95) sy-uline.

DESCRIBE TABLE jtab.

SKIP.

FORMAT COLOR COL_TOTAL INTENSIFIED ON.

WRITE:/ 'No of Exits:' , sy-tfill.

ELSE.

FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.

WRITE:/(95) 'No User Exit exists'.

ENDIF.

ELSE.

FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.

WRITE:/(95) 'Transaction Code Does Not Exist'.

ENDIF.

• Take the user to SMOD for the Exit that was selected.

AT LINE-SELECTION.

GET CURSOR FIELD field1.

CHECK field1(4) EQ 'JTAB'.

SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).

CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

Regards,

GNK

[Former Member]

Have a look at below link which gives a code to find user exits for a particular tcode:

http://www.erpgenie.com/sap/abap/code/abap26.htm

Also have a look at below link which gives information about the user exits related to SD:

http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm

I hope it helps.

Best Regards,

Vibha

*Please mark all the helpful answers

[former_member404244]

Hi,

In SD ucan find user exits in two ways

1>ZINCLUDES

2>STANDARD PROGRAM MODIFICATION.

1>For first one u don't need any access keys,u can find these exits in the following way.

Go to tcode(say va01)->system->status->click on program name ->go to attributes of the program->get the package.

Now go to SMOD->Give package name and execute,u wil see lot of exits..Use the appropriate one and then create a project in CMOD and attach ur enhancement.

2>For second one u can find in the standard program itself(for va01/va02/va03) the program is SAPMV45A.

Go to se80->Give program name SAPMV45A->Then go to subroutines node ->u can see the user exits starting with USEREXIT_*..U can use the exits which over writes the SAP functionality..But u need access keys for this.

Hoping this gives some idea.

Regards,

nagaraj

[Former Member]

hi,

If you want to find the user exits then...

1. go to the transaction you are workin on.

2. go to system --> status and there you'l find your package name.

3. now go to SE81 --> info systems --> enhancements --> customer exits --> enhancements and give your package name there.

now you'l get your user exit here.

Message was edited by:

Gayatri M

[Former Member]

hi asha,

1. go to the particular transaction you want to create a user exit.

2.go to system -> status.

3. find the program name.Double click on it .You will get the program .

4. Goto->attributes. and find the package.

5.go to se81.

6. Go to Information systems in the application tool bar and click it.

7. Enhancements -> customer exits -> Enhancements.give the package name.

8. now process it. you will find the user exits.

or

1. go to "spro"(t -code).

2. IMG information systems .

3. if you know the module , go to the respective module and find the user exits.

hope this is helpful.

reward if helpful.

[Former Member]

Hi ,

In Case of SD , its simple , goto Program of the tcodes and search for word user exits.

sample.

1.in VA01 program --->SAPMV45A , just see the program u will get list of user exits.

2.Best Option is search in SPRO for System Modifications , here also u will get the List.

Regards

Prabhu