Syntax for table control in BDC

[Former Member]

Syntax for table control in BDC

[Former Member]

hi

could yu please tell me what is that error

regards

warun

[Former Member]

Check:

Rob

[Former Member]

Hi,,

Here is the sample code ...

http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm

REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
       DUMMY(100) TYPE C,
       END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
       LIFNR(10) TYPE C,
       BUKRS(4)  TYPE C,
       EKORG(4)  TYPE C,
       KTOKK(4)  TYPE C,
       NAME1(30) TYPE C,
       SORTL(10) TYPE C,
       LAND1(3)  TYPE C,
       SPRAS(2)  TYPE C,
       AKONT(6)  TYPE C,
       FDGRV(2)  TYPE C,
       WAERS(3)  TYPE C,
       END OF IT_XK01,
       BEGIN OF IT_BANK OCCURS 0,
       BANKS(3)  TYPE C,
       BANKL(10) TYPE C,
       BANKN(10) TYPE C,
       KOINH(30) TYPE C,
       LIFNR(10) TYPE C,
       END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
   FILENAME                      = 'C:VENDOR.TXT'
   FILETYPE                      = 'ASC'
 TABLES
   DATA_TAB                      = IT_DUMMY.

LOOP AT IT_DUMMY.
  IF IT_DUMMY-DUMMY+0(2) = '11'.
    IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
    IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
    IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
    IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
    IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
    IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
    IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
    IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
    IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
    IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
    IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
    APPEND IT_XK01.
  ELSE.
    IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
    IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
    IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
    IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
    IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
    APPEND IT_BANK.
  ENDIF.
ENDLOOP.

LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using 'SAPMF02K' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-REF_LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              IT_XK01-LIFNR.
perform bdc_field       using 'RF02K-BUKRS'
                              IT_XK01-BUKRS.
perform bdc_field       using 'RF02K-EKORG'
                              IT_XK01-EKORG.
perform bdc_field       using 'RF02K-KTOKK'
                              IT_XK01-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-TELX1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                              IT_XK01-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                              IT_XK01-SORTL.
perform bdc_field       using 'LFA1-LAND1'
                              IT_XK01-LAND1.
perform bdc_field       using 'LFA1-SPRAS'
                              IT_XK01-SPRAS.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-KOINH(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
DATA : FNAM(20) TYPE C,
       IDX      TYPE C.
  MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
  CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
  perform bdc_field       using FNAM
                                IT_BANK-BANKS.

  CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
  perform bdc_field       using FNAM
                                IT_BANK-BANKL.

  CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
  perform bdc_field       using FNAM
                                IT_BANK-BANKN.

  CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
  perform bdc_field       using FNAM
                                IT_BANK-KOINH.
  IDX = IDX + 1.
ENDLOOP.

perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-FDGRV'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFB1-AKONT'
                              IT_XK01-AKONT.
perform bdc_field       using 'LFB1-FDGRV'
                              IT_XK01-FDGRV.
perform bdc_dynpro      using 'SAPMF02K' '0215'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ZTERM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB5-MAHNA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0310'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFM1-WAERS'
                              IT_XK01-WAERS.
perform bdc_dynpro      using 'SAPMF02K' '0320'.
perform bdc_field       using 'BDC_CURSOR'
                              'WYT3-PARVW(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
                        MODE  'A'
                       UPDATE 'S'
                     MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.

FORM BDC_DYNPRO USING PROG SCR.
  CLEAR IT_BDCDATA.
  IT_BDCDATA-PROGRAM = PROG.
  IT_BDCDATA-DYNPRO  = SCR.
  IT_BDCDATA-DYNBEGIN = 'X'.
  APPEND IT_BDCDATA.
ENDFORM.

FORM BDC_FIELD USING FNAM FVAL.
  CLEAR IT_BDCDATA.
  IT_BDCDATA-FNAM = FNAM.
  IT_BDCDATA-FVAL  = FVAL.
  APPEND IT_BDCDATA.
ENDFORM.