Regarding function module (tables & changing)

[Former Member]

Hi,

I m trying to create a sample function module , i want to know how to use tables and changing tab in function module . I want an exapmle using that. Frnds what is the use of tables and changing parameter tabs.

If anyone can give a simple example ,how to use tables and changing parameter tabs.

Thanking u all.

regards,

satya

[Former Member]

Hi

Function Modules;

Check this matter.

Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.

You can create them from TCode SE37.

Go through the following doc:

Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.

Function Module Interfaces

The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:

Syntax

... [IMPORTING parameters]

[EXPORTING parameters]

[CHANGING parameters]

[TABLES table_parameters]

[{RAISING|EXCEPTIONS} exc1 exc2 ...]

The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.

Interface parameters

The interface parameters are defined on the relevant tab pages in the Function Builder.

IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.

EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.

<b>CHANGING</b> parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.

<b>TABLES</b> parameters are table parameters. Table parameters are obsolete <b>CHANGING</b> parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.

Exceptions

The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.

The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.

The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.

Note

For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.

RFC is a technology which is used to access a functions (Modules) from

the remote systems.

If a function module is set as remote enabled which can be access from

the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.

A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".

But Normal function modules can not accessd from the remote system.

Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)

Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.

CALLING A FUNCTION MODULE:

1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"

--> Write the Corresponding FM name --> Hit Enter

2)The appropriate import ,export Parameters will be displayed in ur editor

3)Pass the Values Here.

Also check these links.

http://www.geocities.com/victorav15/sapr3/abapfun.html

Check this link:

http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm

Check this link:

http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm

See the following links:

http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm

http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm

http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm

http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm

http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm

http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm

<b>Reward points for useful Answers</b>

Regards

Anji

[Former Member]

Hi

Check these links

http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/frameset.htm

http://help.sap.com/saphelp_nw04/helpdata/en/d1/801f02454211d189710000e8322d00/frameset.htm

Regards

Raj

[Former Member]

hi

good

go through these links,which ll give you idea to create the function module

http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm

http://help.sap.com/saphelp_47x200/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

thanks

mrutyun^

[Former Member]

CHANGING parameters. These must be supplied with data when you call the function module, unless they are flagged as optional. They can be changed in the function module. The changed values are then returned to the calling program.

Tables parameters. You use these to pass internal tables. They are treated like CHANGING parameters. However, you can also pass internal tables with other parameters if you specify the parameter type appropriately and the data which u want to return from f.m., this will return into table parameter.

creation of f.m.

1. Assign the input paramater into import parameter.

2. assign the output parmater into export parameter.

3. assign the table where u want to return the values, into tables parameter.

4. changing parameter is depending upon ur requirement.

5. now add ur logic into source code.

if it is useful, please awards the points.

Regards,

shivshankar.

[Former Member]

Hi shivshankar,

Can u please give me a example using those two parameters

in some example.

regards,

satya

[Former Member]

Hi,

for changing parameter check REUSE_ALV_FIELDCATALOG_MERGE,

for tables check REUSE_ALV_LIST_DISPLAY.

Regards,

Ruchika

[Former Member]

Frnds can anyone please give a simple example.

regards,

satya

[Former Member]

Any exapmle frnds.. fro using changing and tables parameter

[Former Member]

Hello frnds,

Any simple example to understand using Changing and Tables tab in function module.

Thanking u all.

Regards,

satya