Regarding E-mail

[Former Member]

Hi ABAPers,

My requirement is that, when any employee get seperates from the organization, then he and his particular department people (through which he has taken company products Ex:- Laptops, company cars, etc.,) should get E-Mails, that he is leaving from the company so kindly collect all the products from him.

This is working well, but the problem was instead of sending one mail to each of them, they were going twice or thrice.

so how can i solve this.

i used FM "SO_NEW_DOCUMENT_SEND_API1" to send mails.

in that FM i passed these two, object_content = i_message

receivers = i_receivers

while debugging "i_receivers" contains 3 mail-id's, but it was going 2 time for each of them.

can any one help me in this issue.

Thanks in Advance,

Regards,

Ramana Prasad. T

[Former Member]

Hi Ramana,

Try with the below code.

DATA: v_ans,

v_body_lines TYPE i.

• Local declarations

CONSTANTS:

c_note_00 TYPE solisti1 VALUE 'NOTE',

c_note_01 TYPE solisti1 VALUE

'Do not reply to this email, instead please contact the compensation ',

c_note_02 TYPE solisti1 VALUE

'specialist (see above for contact details). This will help avoid ',

c_note_03 TYPE solisti1 VALUE

'unnecessarily delaying your request.'.

DATA: it_packing_list TYPE TABLE OF sopcklsti1,

wa_packing_list LIKE LINE OF it_packing_list,

it_receivers TYPE TABLE OF somlreci1,

wa_receivers LIKE LINE OF it_receivers,

it_mailbody TYPE TABLE OF solisti1,

wa_mailbody LIKE LINE OF it_mailbody.

DATA: it_doc TYPE sodocchgi1.

DATA: v_sent_all TYPE boolean.

START-OF-SELECTION.

• mail header

it_doc-obj_descr = 'EMIT / SAS Pernrs List'.

• Add the recipients email address

CLEAR wa_receivers.

REFRESH it_receivers.

wa_receivers-receiver = 'XXXXXXX@XXX.COM'.

wa_receivers-rec_type = 'U'.

wa_receivers-com_type = 'INT'.

wa_receivers-notif_del = 'X'.

wa_receivers-notif_ndel = 'X'.

APPEND wa_receivers TO it_receivers.

wa_receivers-receiver = 'XXXXXXX@XXX.COM'.

wa_receivers-rec_type = 'U'.

wa_receivers-com_type = 'INT'.

wa_receivers-notif_del = 'X'.

wa_receivers-notif_ndel = 'X'.

APPEND wa_receivers TO it_receivers.

wa_receivers-receiver = 'XXXXXXX@XXX.COM'.

wa_receivers-rec_type = 'U'.

wa_receivers-com_type = 'INT'.

wa_receivers-notif_del = 'X'.

wa_receivers-notif_ndel = 'X'.

APPEND wa_receivers TO it_receivers.

wa_receivers-receiver = 'XXXXXXX@XXX.COM'.

wa_receivers-rec_type = 'U'.

wa_receivers-com_type = 'INT'.

wa_receivers-notif_del = 'X'.

wa_receivers-notif_ndel = 'X'.

APPEND wa_receivers TO it_receivers.

• Mail Body

CLEAR wa_mailbody.

REFRESH it_mailbody.

wa_mailbody-line = 'Hi All,'.

APPEND wa_mailbody TO it_mailbody.

wa_mailbody-line = ' '.

APPEND wa_mailbody TO it_mailbody.

wa_mailbody-line = 'The EMIT / SAS Pernrs are'.

APPEND wa_mailbody TO it_mailbody.

wa_mailbody-line = ' '.

APPEND wa_mailbody TO it_mailbody.

DO 3 TIMES.

wa_mailbody-line = ' '.

APPEND wa_mailbody TO it_mailbody.

ENDDO.

wa_mailbody-line = c_note_00.

APPEND wa_mailbody TO it_mailbody.

wa_mailbody-line = c_note_01.

APPEND wa_mailbody TO it_mailbody.

wa_mailbody-line = c_note_02.

APPEND wa_mailbody TO it_mailbody.

wa_mailbody-line = c_note_03.

APPEND wa_mailbody TO it_mailbody.

• Describe the body of the message

CLEAR wa_packing_list.

REFRESH it_packing_list.

wa_packing_list-transf_bin = space.

wa_packing_list-head_start = 1.

wa_packing_list-head_num = 0.

wa_packing_list-body_start = 1.

DESCRIBE TABLE it_mailbody LINES v_body_lines.

wa_packing_list-body_num = v_body_lines.

wa_packing_list-doc_type = 'RAW'.

APPEND wa_packing_list TO it_packing_list.

CALL FUNCTION 'SO_DOCUMENT_SEND_API1'

EXPORTING

document_data = it_doc

put_in_outbox = 'X'

commit_work = 'X'

IMPORTING

sent_to_all = v_sent_all

TABLES

packing_list = it_packing_list

contents_txt = it_mailbody

receivers = it_receivers

EXCEPTIONS

too_many_receivers = 1

document_not_sent = 2

document_type_not_exist = 3

operation_no_authorization = 4

parameter_error = 5

x_error = 6

enqueue_error = 7

OTHERS = 8.

IF sy-subrc <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ELSE.

WRITE:/ 'Mail has been sent to the receivers sucessfully'.

ENDIF.

Message was edited by:

Velangini Showry Maria Kumar Bandanadham

Message was edited by:

Velangini Showry Maria Kumar Bandanadham

[Former Member]

Hi ...

seee yhe below program and the clear & refresher with in the loop ... and also the bolled fields passsing to the FM

*&---------------------------------------------------------------------*
*& Report  ZSPOOLTOPDF                                                 *
*&                                                                     *
*&---------------------------------------------------------------------*
*& Converts spool request into PDF document and emails it to           *
*& recipicant.                                                         *
*&                                                                     *
*& Execution                                                           *
*& ---------                                                           *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on      *
*& screen                                                              *
*&---------------------------------------------------------------------*
REPORT  zspooltopdf.

PARAMETER: p_email1 LIKE somlreci1-receiver
                                    DEFAULT 'abap@sapdev.co.uk',
           p_sender LIKE somlreci1-receiver
                                    DEFAULT 'abap@sapdev.co.uk',
           p_delspl  AS CHECKBOX.

*DATA DECLARATION
DATA: gd_recsize TYPE i.

* Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.

* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.


DATA:  w_recsize TYPE i.

DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.

* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.

* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.

CONSTANTS: c_dev LIKE  sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.

************************************************************************
*START-OF-SELECTION.
START-OF-SELECTION.

* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
  WRITE 'Hello World'.
  new-page.
  commit work.
  new-page print off.

  IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.

************************************
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
*        to sap-spool
*        spool parameters   %_print
*        archive parameters %_print
*        without spool dynpro
*        and return.
************************************

* Get spool id from program called above 
*  IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.

    PERFORM convert_spool_to_pdf.
    PERFORM process_email.

    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.

    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
  ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
  ENDIF.


*---------------------------------------------------------------------*
*       FORM obtain_spool_id                                          *
*---------------------------------------------------------------------*
FORM obtain_spool_id.
  CHECK NOT ( gd_jobname IS INITIAL ).
  CHECK NOT ( gd_jobcount IS INITIAL ).

  SELECT * FROM  tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.

  READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
  IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
  ELSE.
    MESSAGE s005(zdd).
  ENDIF.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM get_job_details                                          *
*---------------------------------------------------------------------*
FORM get_job_details.
* Get current job details
  CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM convert_spool_to_pdf                                     *
*---------------------------------------------------------------------*
FORM convert_spool_to_pdf.

  CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed  = 11
            OTHERS                   = 12.

  CHECK sy-subrc = 0.

* Transfer the 132-long strings to 255-long strings
  LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
  ENDLOOP.

  TRANSLATE gd_buffer USING '~ '.

  DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
  ENDDO.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM process_email                                            *
*---------------------------------------------------------------------*
FORM process_email.
  DESCRIBE TABLE it_mess_att LINES gd_recsize.
  CHECK gd_recsize > 0.
  PERFORM send_email USING p_email1.
*  perform send_email using p_email2.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM send_email                                               *
*---------------------------------------------------------------------*
*  -->  p_email                                                       *
*---------------------------------------------------------------------*
FORM send_email USING p_email.
  CHECK NOT ( p_email IS INITIAL ).

  REFRESH it_mess_bod.

* Default subject matter
  gd_subject         = 'Subject'.
  gd_attachment_desc = 'Attachname'.
*  CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
  it_mess_bod        = 'Message Body text, line 1'.
  APPEND it_mess_bod.
  it_mess_bod        = 'Message Body text, line 2...'.
  APPEND it_mess_bod.

* If no sender specified - default blank
  IF p_sender EQ space.
    gd_sender_type  = space.
  ELSE.
    gd_sender_type  = 'INT'.
  ENDIF.


* Send file by email as .xls speadsheet
  PERFORM send_file_as_email_attachment
                              tables

<b>it_mess_bod</b>

it_mess_att
                                using p_email
                                      'Example .xls documnet attachment'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM delete_spool                                             *
*---------------------------------------------------------------------*
FORM delete_spool.
  DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.

  ld_spool_nr = gd_spool_nr.

  CHECK p_delspl <> c_no.
  CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.


*&---------------------------------------------------------------------*
*&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
*&---------------------------------------------------------------------*
*       Send email
*----------------------------------------------------------------------*
FORM send_file_as_email_attachment tables

<b>it_message</b>

                                    it_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.


  DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE  somlreci1-receiver,
        ld_format TYPE  so_obj_tp ,
        ld_attdescription TYPE  so_obj_nam ,
        ld_attfilename TYPE  so_obj_des ,
        ld_sender_address LIKE  soextreci1-receiver,
        ld_sender_address_type LIKE  soextreci1-adr_typ,
        ld_receiver LIKE  sy-subrc.

data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1.


  ld_email   = p_email.
  ld_mtitle = p_mtitle.
  ld_format              = p_format.
  ld_attdescription      = p_attdescription.
  ld_attfilename         = p_filename.
  ld_sender_address      = p_sender_address.
  ld_sender_address_type = p_sender_addres_type.


* Fill the document data.
  w_doc_data-doc_size = 1.

* Populate the subject/generic message attributes
  w_doc_data-obj_langu = sy-langu.
  w_doc_data-obj_name  = 'SAPRPT'.
  w_doc_data-obj_descr = ld_mtitle .
  w_doc_data-sensitivty = 'F'.

* Fill the document data and get size of attachment
  CLEAR w_doc_data.
  READ TABLE it_attach INDEX w_cnt.
  w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
  w_doc_data-obj_langu  = sy-langu.
  w_doc_data-obj_name   = 'SAPRPT'.
  w_doc_data-obj_descr  = ld_mtitle.
  w_doc_data-sensitivty = 'F'.
  CLEAR t_attachment.
  REFRESH t_attachment.
  t_attachment[] = it_attach[].

* Describe the body of the message
  CLEAR t_packing_list.
  REFRESH t_packing_list.
  t_packing_list-transf_bin = space.
  t_packing_list-head_start = 1.
  t_packing_list-head_num = 0.
  t_packing_list-body_start = 1.
  DESCRIBE TABLE

<b>it_message</b>

 LINES t_packing_list-body_num.
  t_packing_list-doc_type = 'RAW'.
  APPEND t_packing_list.

* Create attachment notification
  t_packing_list-transf_bin = 'X'.
  t_packing_list-head_start = 1.
  t_packing_list-head_num   = 1.
  t_packing_list-body_start = 1.

  DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
  t_packing_list-doc_type   =  ld_format.
  t_packing_list-obj_descr  =  ld_attdescription.
  t_packing_list-obj_name   =  ld_attfilename.
  t_packing_list-doc_size   =  t_packing_list-body_num * 255.
APPEND t_packing_list.

<b>* Add the recipients email address

CLEAR t_receivers.

REFRESH t_receivers.

t_receivers-receiver = ld_email.

t_receivers-rec_type = 'U'.

t_receivers-com_type = 'INT'.

t_receivers-notif_del = 'X'.

t_receivers-notif_ndel = 'X'.

APPEND t_receivers.</b>

  CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.

* Populate zerror return code
  ld_error = sy-subrc.

* Populate zreceiver return code
  LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
  ENDLOOP.
ENDFORM.

Reward points if it is usefull .....

gIRISH

[Former Member]

Hi Ramana,

Where are you putting your code. Is it in a report or in some FM.

may be the program is called twice or more.

Regards,

Atish