regarding bdc control

[Former Member]

hai,

in my recording i.e in shdb for xk01 my screen resolution contains 10 rows if i entering 11th row means i have to press page down so for that i dont know how to write coding in abap editor i.e in bdc table control.

with regards,

r.dhineshraj.

Edited by: dhinesh raj on Jun 30, 2008 8:02 AM

[Former Member]

Hi Dhinesh,

Table Control in BDC

HI,

Refer the link:

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm

The concept is easy: it has to indicate the index of the table control in the field name, so if you have to populate the first record of table control:

BDC-FIELDNAME = <FIELDNAME>(01).

If you fill the second row:

BDC-FIELDNAME = <FIELDNAME>(02).

and so....

Now the problem is usually on how many records you have to load, because u can fill only the rows of table control available in the screen, If you have more records than it can be displayed yuo have to simulate the command to go next page.

The number of recod can be displayed can depend on pc resolution and many program haven't command to go to next page (in this case it could be impossible create a BDC program9.

A way to create a bdc program resolution indipendent is to work on the first and second row.

- Place the first hit in the first row of bdc;

- Place the second insert in the second row of bdc;

- Place the last hit to the top of table control;

- Place the next hit in the second row;

- Place the last hit to the top of table control;

- Place the next hit in the second row;

- .... and so

For more info: Search in SDN with TABLE CONTROL IN BDC.

Will get a lot of related links.

**----Parameter for runtime of CALL TRANSACTION.

DATA: st_opt LIKE ctu_params.

st_opt-dismode = c_mode. " Processing mode for CALL TRANSACTION

st_opt-updmode = ''. " Update mode for CALL TRANSACTION

st_opt-defsize = ''. " Default screen size for CALL TRANS

st_opt-nobiend = ''.

*----Call transaction

CALL TRANSACTION c_tcode USING it_bdcdata

OPTIONS FROM st_opt

MESSAGES INTO it_bdcmsgcoll.

Reward points if this helps.

Manish

[Former Member]

hi

check this sample code of XK01

REPORT zprataptable2

NO STANDARD PAGE HEADING LINE-SIZE 255.

DATA : BEGIN OF itab OCCURS 0,

i1 TYPE i,

lifnr LIKE rf02k-lifnr,

bukrs LIKE rf02k-bukrs,

ekorg LIKE rf02k-ekorg,

ktokk LIKE rf02k-ktokk,

anred LIKE lfa1-anred,

name1 LIKE lfa1-name1,

sortl LIKE lfa1-sortl,

land1 LIKE lfa1-land1,

akont LIKE lfb1-akont,

fdgrv LIKE lfb1-fdgrv,

waers LIKE lfm1-waers,

END OF itab.

DATA : BEGIN OF jtab OCCURS 0,

j1 TYPE i,

banks LIKE lfbk-banks,

bankl LIKE lfbk-bankl,

bankn LIKE lfbk-bankn,

END OF jtab.

DATA : cnt(4) TYPE n.

DATA : fdt(20) TYPE c.

DATA : c TYPE i.

INCLUDE bdcrecx1.

START-OF-SELECTION.

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

filename = 'C:\first1.txt'

filetype = 'DAT'

TABLES

data_tab = itab.

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

filename = 'C:\second.txt'

filetype = 'DAT'

TABLES

data_tab = jtab.

LOOP AT itab.

PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.

PERFORM bdc_field USING 'BDC_CURSOR'

'RF02K-KTOKK'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'RF02K-LIFNR'

itab-lifnr.

PERFORM bdc_field USING 'RF02K-BUKRS'

itab-bukrs.

PERFORM bdc_field USING 'RF02K-EKORG'

itab-ekorg.

PERFORM bdc_field USING 'RF02K-KTOKK'

itab-ktokk.

PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFA1-LAND1'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'LFA1-ANRED'

itab-anred.

PERFORM bdc_field USING 'LFA1-NAME1'

itab-name1.

PERFORM bdc_field USING 'LFA1-SORTL'

itab-sortl.

PERFORM bdc_field USING 'LFA1-LAND1'

itab-land1.

PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFA1-KUNNR'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFBK-BANKN(01)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

cnt = 0.

LOOP AT jtab WHERE j1 = itab-i1.

cnt = cnt + 1.

CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.

PERFORM bdc_field USING fdt jtab-banks.

CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.

PERFORM bdc_field USING fdt jtab-bankl.

CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.

PERFORM bdc_field USING fdt jtab-bankn.

IF cnt = 5.

cnt = 0.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFBK-BANKS(01)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=P+'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFBK-BANKN(02)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

ENDIF.

ENDLOOP.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFBK-BANKS(01)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFB1-FDGRV'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'LFB1-AKONT'

itab-akont.

PERFORM bdc_field USING 'LFB1-FDGRV'

itab-fdgrv.

PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFB1-ZTERM'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFB5-MAHNA'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFM1-WAERS'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'LFM1-WAERS'

itab-waers.

PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.

PERFORM bdc_field USING 'BDC_CURSOR'

'RF02K-LIFNR'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=YES'.

PERFORM bdc_transaction USING 'XK01'.

ENDLOOP.

PERFORM close_group.

Header file:

1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr

2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr

TC file:

1 in sb 11000

1 in sb 12000

1 in sb 13000

1 in sb 14000

1 in sb 15000

1 in sb 16000

1 in sb 17000

1 in sb 18000

1 in sb 19000

1 in sb 20000

1 in sb 21000

1 in sb 22000

2 in sb 21000

2 in sb 22000

**********************************************

****************************************

Refer e.g. of XK01 in this thread i want to explain only:

here data which u want to upload is added in seprate itab. and this is refered in main itab using loop. Second main point is that index is used for row no of tables like :

loop at itab. "main itab

.

.

.

DATA : FNAM(20) TYPE C,

IDX TYPE C.

MOVE 1 TO IDX.

LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.

CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKS.

CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKL.

CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKN.

CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-KOINH.

IDX = IDX + 1.

ENDLOOP.

.

.

endloop."for main itab

thanks

sitaram

[Former Member]

hi

check this code.. this will solve your issue

w_tabix = 0.

LOOP AT itab_fields WHERE count EQ w_index.

ADD 1 TO w_tabix.

IF w_tabix gt 10.

PERFORM bdc_dynpro USING 'SAPLSD41' '2200'.

PERFORM bdc_field USING 'BDC_CURSOR'

w_fname.

PERFORM bdc_field USING 'BDC_OKCODE'

'=P+'.

w_tabix = 2.

ENDIF.

CONCATENATE 'DD03P-FIELDNAME(' w_tabix ')' INTO w_fname.

CONCATENATE 'DD03P-KEYFLAG(' w_tabix ')' INTO w_fkey.

CONCATENATE 'DD03D-DATATYPE(' w_tabix ')' INTO w_ftype.

CONCATENATE 'DD03P-LENG(' w_tabix ')' INTO w_flen.

CONCATENATE 'DD03P-DDTEXT(' w_tabix ')' INTO w_fdesc.

note : this code is for se11 transaction... do the necessary changes regarding screen no and program no

reward points if useful

regards

padma

Edited by: Padmavathi Palli on Jun 30, 2008 8:06 AM

[Former Member]

Hi Dhinesh,

Page down has function code '=P+'.

BDC_OKCODE = '=P+'.

Best regards,

raam