problem in bdc

[Former Member]

Hi Experts,

Problem in BCD program table control scrolling there are 17 rows in table control. Iam checking the condition if cnt = 17 . populating okcode of next page.

This okcode is populating but when i checking it on the screen the okcode is not populated on the screen . when i checked it in debugging it is populated .

Regards,

Ravi

[Former Member]

Hi,

Check the following link:

http://sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm

Regards,

Bhaskar

[Former Member]

hi,

refresh the BDC.

[Former Member]

Hi,

May be the Table control lines is giving Problem,

You need to use the CTU_PARAMS to control the Screen resolutions, so every time the table control lines will be constant, Count the Table lines while doing the Recording, that many of lines will come as constnat, or you can set the lines manuvally also ..... then write the code,

* Set the parameters for Call Transaction
CLEAR WA_CTU_PARAMS.
WA_CTU_PARAMS-DISMODE = 'N'.
WA_CTU_PARAMS-UPDMODE = 'S'.
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'.

* Call Transaction MM01
CALL TRANSACTION 'MM01' USING T_BDCDATA OPTIONS FROM WA_CTU_PARAMS
MESSAGES INTO T_BDCMSGCOLL.

Regards

Sudheer

[Former Member]

You need to store OK_CODE in temporary variable, then use it. Because sometimes, if it is just "ENTER", it will not be reflected...

Thanks

Chetan Shah

[Former Member]

see the below bdc is working for 17 rows in the table controll ... and works fine for scrolling also .

REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
       DUMMY(100) TYPE C,
       END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
       LIFNR(10) TYPE C,
       BUKRS(4)  TYPE C,
       EKORG(4)  TYPE C,
       KTOKK(4)  TYPE C,
       NAME1(30) TYPE C,
       SORTL(10) TYPE C,
       LAND1(3)  TYPE C,
       SPRAS(2)  TYPE C,
       AKONT(6)  TYPE C,
       FDGRV(2)  TYPE C,
       WAERS(3)  TYPE C,
       END OF IT_XK01,
       BEGIN OF IT_BANK OCCURS 0,
       BANKS(3)  TYPE C,
       BANKL(10) TYPE C,
       BANKN(10) TYPE C,
       KOINH(30) TYPE C,
       LIFNR(10) TYPE C,
       END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
   FILENAME                      = 'C:VENDOR.TXT'
   FILETYPE                      = 'ASC'
 TABLES
   DATA_TAB                      = IT_DUMMY.

LOOP AT IT_DUMMY.
  IF IT_DUMMY-DUMMY+0(2) = '17'.
    IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
    IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
    IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
    IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
    IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
    IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
    IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
    IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
    IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
    IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
    IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
    APPEND IT_XK01.
  ELSE.
    IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
    IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
    IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
    IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
    IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
    APPEND IT_BANK.
  ENDIF.
ENDLOOP.

LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using 'SAPMF02K' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-REF_LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              IT_XK01-LIFNR.
perform bdc_field       using 'RF02K-BUKRS'
                              IT_XK01-BUKRS.
perform bdc_field       using 'RF02K-EKORG'
                              IT_XK01-EKORG.
perform bdc_field       using 'RF02K-KTOKK'
                              IT_XK01-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-TELX1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                              IT_XK01-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                              IT_XK01-SORTL.
perform bdc_field       using 'LFA1-LAND1'
                              IT_XK01-LAND1.
perform bdc_field       using 'LFA1-SPRAS'
                              IT_XK01-SPRAS.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-KOINH(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
DATA : FNAM(20) TYPE C,
       IDX      TYPE C.
  MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
  CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
  perform bdc_field       using FNAM
                                IT_BANK-BANKS.

  CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
  perform bdc_field       using FNAM
                                IT_BANK-BANKL.

  CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
  perform bdc_field       using FNAM
                                IT_BANK-BANKN.

  CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
  perform bdc_field       using FNAM
                                IT_BANK-KOINH.
  IDX = IDX + 1.
ENDLOOP.

perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-FDGRV'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFB1-AKONT'
                              IT_XK01-AKONT.
perform bdc_field       using 'LFB1-FDGRV'
                              IT_XK01-FDGRV.
perform bdc_dynpro      using 'SAPMF02K' '0215'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ZTERM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB5-MAHNA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0310'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFM1-WAERS'
                              IT_XK01-WAERS.
perform bdc_dynpro      using 'SAPMF02K' '0320'.
perform bdc_field       using 'BDC_CURSOR'
                              'WYT3-PARVW(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
                        MODE  'A'
                       UPDATE 'S'
                     MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.

FORM BDC_DYNPRO USING PROG SCR.
  CLEAR IT_BDCDATA.
  IT_BDCDATA-PROGRAM = PROG.
  IT_BDCDATA-DYNPRO  = SCR.
  IT_BDCDATA-DYNBEGIN = 'X'.
  APPEND IT_BDCDATA.
ENDFORM.

FORM BDC_FIELD USING FNAM FVAL.
  CLEAR IT_BDCDATA.
  IT_BDCDATA-FNAM = FNAM.
  IT_BDCDATA-FVAL  = FVAL.
  APPEND IT_BDCDATA.
ENDFORM.

reward points if it is usefull ...

Girish