Output formatting problems with SO_DOCUMENT_SEND_API1

[Former Member]

Hi,

I am sending an output file via email using the function module SO_DOCUMENT_SEND_API1.

The tlines table which I am passing into this function has 66 lines in it and I expect there to be 66 lines in the output file attached in the email. However, everything seems to be output into a single line.

If I send the output directly to the server it is fine.

Has anyone seen anything like this before or have any suggestions on what might be causing this?

Thanks,

Ruby

[Former Member]

This is code it send the multiple lines in the attach file .

[code]REPORT ZSENDEXTERNAL.

DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.

DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.

DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.

DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.

DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.

DATA: DOC_CHNG LIKE SODOCCHGI1.

DATA: TAB_LINES LIKE SY-TABIX.

• Creation of the document to be sent

• File Name

DOC_CHNG-OBJ_NAME = 'SENDFILE'.

• Mail Subject

DOC_CHNG-OBJ_DESCR = 'Send External Mail'.

• Mail Contents

OBJTXT = 'Minimum bid : $250000'.

APPEND OBJTXT.

OBJTXT = 'A representation of the pictures up for auction'.

APPEND OBJTXT.

OBJTXT = 'was included as attachment.'.

APPEND OBJTXT.

DESCRIBE TABLE OBJTXT LINES TAB_LINES.

READ TABLE OBJTXT INDEX TAB_LINES.

DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).

• Creation of the entry for the compressed document

CLEAR OBJPACK-TRANSF_BIN.

OBJPACK-HEAD_START = 1.

OBJPACK-HEAD_NUM = 0.

OBJPACK-BODY_START = 1.

OBJPACK-BODY_NUM = TAB_LINES.

OBJPACK-DOC_TYPE = 'RAW'.

APPEND OBJPACK.

• Creation of the document attachment

• (Assume that the data in OBJBIN is in BMP format)

*OBJBIN = ' \O/ '. APPEND OBJBIN.

*OBJBIN = ' | '. APPEND OBJBIN.

*OBJBIN = ' / \ '. APPEND OBJBIN.

*DESCRIBE TABLE OBJBIN LINES TAB_LINES.

*OBJHEAD = 'PICTURE.BMP'.

*APPEND OBJHEAD.

• Creation of the entry for the compressed attachment

*OBJPACK-TRANSF_BIN = 'X'.

*OBJPACK-HEAD_START = 1.

*OBJPACK-HEAD_NUM = 1.

*OBJPACK-BODY_START = 1.

*OBJPACK-BODY_NUM = TAB_LINES.

*OBJPACK-DOC_TYPE = 'BMP'.

*OBJPACK-OBJ_NAME = 'PICTURE'.

*OBJPACK-OBJ_DESCR = 'Representation of object 138'.

*OBJPACK-DOC_SIZE = TAB_LINES * 255.

*APPEND OBJPACK.

• Completing the recipient list

RECLIST-RECEIVER = 'youremail@sap.com'.

RECLIST-REC_TYPE = 'U'.

APPEND RECLIST.

*RECLIST-RECEIVER = 'SAPUSERNAME'.

*RECLIST-REC_TYPE = 'P'.

*APPEND RECLIST.

• Sending the document

CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'

EXPORTING

DOCUMENT_DATA = DOC_CHNG

PUT_IN_OUTBOX = 'X'

TABLES

PACKING_LIST = OBJPACK

OBJECT_HEADER = OBJHEAD

CONTENTS_BIN = OBJBIN

CONTENTS_TXT = OBJTXT

RECEIVERS = RECLIST

EXCEPTIONS

TOO_MANY_RECEIVERS = 1

DOCUMENT_NOT_SENT = 2

OPERATION_NO_AUTHORIZATION = 4

OTHERS = 99.

CASE SY-SUBRC.

WHEN 0.

WRITE: / 'Result of the send process:'.

LOOP AT RECLIST.

WRITE: / RECLIST-RECEIVER(48), ':'.

IF RECLIST-RETRN_CODE = 0.

WRITE 'The document was sent'.

ELSE.

WRITE 'The document could not be sent'.

ENDIF.

ENDLOOP.

WHEN 1.

WRITE: / 'No authorization for sending to the specified number',

'of recipients'.

WHEN 2.

WRITE: / 'Document could not be sent to any recipient'.

WHEN 4.

WRITE: / 'No send authorization'.

WHEN OTHERS.

WRITE: / 'Error occurred while sending'.

ENDCASE.

[/code]

reward points if it is usefull ..

Girish

[Former Member]

Here is the another program which Converts the spool into PDF and sends as attach file .

*   
*&---------------------------------------------------------------------*
*& Report  ZSPOOLTOPDF                                                 *
*&                                                                     *
*&---------------------------------------------------------------------*
*& Converts spool request into PDF document and emails it to           *
*& recipicant.                                                         *
*&                                                                     *
*& Execution                                                           *
*& ---------                                                           *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on      *
*& screen                                                              *
*&---------------------------------------------------------------------*
REPORT  zspooltopdf.

PARAMETER: p_email1 LIKE somlreci1-receiver
                                    DEFAULT 'abap@sapdev.co.uk',
           p_sender LIKE somlreci1-receiver
                                    DEFAULT 'abap@sapdev.co.uk',
           p_delspl  AS CHECKBOX.

*DATA DECLARATION
DATA: gd_recsize TYPE i.

* Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.

* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.


DATA:  w_recsize TYPE i.

DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.

* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.

* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.

CONSTANTS: c_dev LIKE  sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.

************************************************************************
*START-OF-SELECTION.
START-OF-SELECTION.

* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
  WRITE 'Hello World'.
  new-page.
  commit work.
  new-page print off.

  IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.

************************************
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
*        to sap-spool
*        spool parameters   %_print
*        archive parameters %_print
*        without spool dynpro
*        and return.
************************************

* Get spool id from program called above 
*  IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.

    PERFORM convert_spool_to_pdf.
    PERFORM process_email.

    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.

    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
  ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
  ENDIF.


*---------------------------------------------------------------------*
*       FORM obtain_spool_id                                          *
*---------------------------------------------------------------------*
FORM obtain_spool_id.
  CHECK NOT ( gd_jobname IS INITIAL ).
  CHECK NOT ( gd_jobcount IS INITIAL ).

  SELECT * FROM  tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.

  READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
  IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
  ELSE.
    MESSAGE s005(zdd).
  ENDIF.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM get_job_details                                          *
*---------------------------------------------------------------------*
FORM get_job_details.
* Get current job details
  CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM convert_spool_to_pdf                                     *
*---------------------------------------------------------------------*
FORM convert_spool_to_pdf.

  CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed  = 11
            OTHERS                   = 12.

  CHECK sy-subrc = 0.

* Transfer the 132-long strings to 255-long strings
  LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
  ENDLOOP.

  TRANSLATE gd_buffer USING '~ '.

  DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
  ENDDO.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM process_email                                            *
*---------------------------------------------------------------------*
FORM process_email.
  DESCRIBE TABLE it_mess_att LINES gd_recsize.
  CHECK gd_recsize > 0.
  PERFORM send_email USING p_email1.
*  perform send_email using p_email2.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM send_email                                               *
*---------------------------------------------------------------------*
*  -->  p_email                                                       *
*---------------------------------------------------------------------*
FORM send_email USING p_email.
  CHECK NOT ( p_email IS INITIAL ).

  REFRESH it_mess_bod.

* Default subject matter
  gd_subject         = 'Subject'.
  gd_attachment_desc = 'Attachname'.
*  CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
  it_mess_bod        = 'Message Body text, line 1'.
  APPEND it_mess_bod.
  it_mess_bod        = 'Message Body text, line 2...'.
  APPEND it_mess_bod.

* If no sender specified - default blank
  IF p_sender EQ space.
    gd_sender_type  = space.
  ELSE.
    gd_sender_type  = 'INT'.
  ENDIF.


* Send file by email as .xls speadsheet
  PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                using p_email
                                      'Example .xls documnet attachment'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.


*---------------------------------------------------------------------*
*       FORM delete_spool                                             *
*---------------------------------------------------------------------*
FORM delete_spool.
  DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.

  ld_spool_nr = gd_spool_nr.

  CHECK p_delspl <> c_no.
  CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.


*&---------------------------------------------------------------------*
*&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
*&---------------------------------------------------------------------*
*       Send email
*----------------------------------------------------------------------*
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.


  DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE  somlreci1-receiver,
        ld_format TYPE  so_obj_tp ,
        ld_attdescription TYPE  so_obj_nam ,
        ld_attfilename TYPE  so_obj_des ,
        ld_sender_address LIKE  soextreci1-receiver,
        ld_sender_address_type LIKE  soextreci1-adr_typ,
        ld_receiver LIKE  sy-subrc.

data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1.


  ld_email   = p_email.
  ld_mtitle = p_mtitle.
  ld_format              = p_format.
  ld_attdescription      = p_attdescription.
  ld_attfilename         = p_filename.
  ld_sender_address      = p_sender_address.
  ld_sender_address_type = p_sender_addres_type.


* Fill the document data.
  w_doc_data-doc_size = 1.

* Populate the subject/generic message attributes
  w_doc_data-obj_langu = sy-langu.
  w_doc_data-obj_name  = 'SAPRPT'.
  w_doc_data-obj_descr = ld_mtitle .
  w_doc_data-sensitivty = 'F'.

* Fill the document data and get size of attachment
  CLEAR w_doc_data.
  READ TABLE it_attach INDEX w_cnt.
  w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
  w_doc_data-obj_langu  = sy-langu.
  w_doc_data-obj_name   = 'SAPRPT'.
  w_doc_data-obj_descr  = ld_mtitle.
  w_doc_data-sensitivty = 'F'.
  CLEAR t_attachment.
  REFRESH t_attachment.
  t_attachment[] = it_attach[].

* Describe the body of the message
  CLEAR t_packing_list.
  REFRESH t_packing_list.
  t_packing_list-transf_bin = space.
  t_packing_list-head_start = 1.
  t_packing_list-head_num = 0.
  t_packing_list-body_start = 1.
  DESCRIBE TABLE it_message LINES t_packing_list-body_num.
  t_packing_list-doc_type = 'RAW'.
  APPEND t_packing_list.

* Create attachment notification
  t_packing_list-transf_bin = 'X'.
  t_packing_list-head_start = 1.
  t_packing_list-head_num   = 1.
  t_packing_list-body_start = 1.

  DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
  t_packing_list-doc_type   =  ld_format.
  t_packing_list-obj_descr  =  ld_attdescription.
  t_packing_list-obj_name   =  ld_attfilename.
  t_packing_list-doc_size   =  t_packing_list-body_num * 255.
  APPEND t_packing_list.

* Add the recipients email address
  CLEAR t_receivers.
  REFRESH t_receivers.
  t_receivers-receiver = ld_email.
  t_receivers-rec_type = 'U'.
  t_receivers-com_type = 'INT'.
  t_receivers-notif_del = 'X'.
  t_receivers-notif_ndel = 'X'.
  APPEND t_receivers.

  CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.

* Populate zerror return code
  ld_error = sy-subrc.

* Populate zreceiver return code
  LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
  ENDLOOP.
ENDFORM.

reward points if it is usefull ...

Girish

[Former Member]

SAP Send mail via ABAP functions <b>SO_NEW_DOCUMENT_SEND_API1</b>

This abap mail sending program demonstrate how you can send a mail to the user SAP Office mailbox.

REPORT ZSEND .

TABLES: KNA1.

• data for send function

DATA DOC_DATA LIKE SODOCCHGI1.

DATA OBJECT_ID LIKE SOODK.

DATA OBJCONT LIKE SOLI OCCURS 10 WITH HEADER LINE.

DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.

SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.

WRITE:/ KNA1-KUNNR, KNA1-ANRED.

<b>* send data internal table</b>

<b> CONCATENATE KNA1-KUNNR KNA1-ANRED

INTO OBJCONT-LINE SEPARATED BY SPACE.

APPEND OBJCONT.</b>

ENDSELECT.

• insert receiver (sap name)

REFRESH RECEIVER.

CLEAR RECEIVER.

MOVE: SY-UNAME TO RECEIVER-RECEIVER,

'X' TO RECEIVER-EXPRESS,

'B' TO RECEIVER-REC_TYPE.

APPEND RECEIVER.

• insert mail description

WRITE 'Sending a mail through abap'

TO DOC_DATA-OBJ_DESCR.

CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1' 
     EXPORTING 
          DOCUMENT_DATA              = DOC_DATA 
     IMPORTING 
          NEW_OBJECT_ID              = OBJECT_ID 
     TABLES 
          OBJECT_CONTENT             = OBJCONT 
          RECEIVERS                  = RECEIVER 
     EXCEPTIONS 
          TOO_MANY_RECEIVERS         = 1 
          DOCUMENT_NOT_SENT          = 2 
          DOCUMENT_TYPE_NOT_EXIST    = 3 
          OPERATION_NO_AUTHORIZATION = 4 
          PARAMETER_ERROR            = 5 
          X_ERROR                    = 6 
          ENQUEUE_ERROR              = 7 
          OTHERS                     = 8.

reward points if it is usefull.....

Girish

[Former Member]

Hi Ruby,

Do like this to get the correct output. This is an example code for getting 2 columns in the output mail.

1. Declare some HTML Tags as constants constants for creating a HTML mail.

DATA : lit_contents TYPE TABLE OF solisti1,

lwa_contents TYPE solisti1,

lt_text_el_tab TYPE TABLE OF textpool,

lwa_text_el_tab TYPE textpool,

lwa_document_data TYPE sodocchgi1.

DATA: lwa_receivers TYPE somlreci1,

lit_receivers TYPE TABLE OF somlreci1.

CONSTANTS:

c_mail_start(255) VALUE '',

c_doc_type(3) TYPE c VALUE 'HTM'.

*create the new contents table----

---

*

lwa_contents-line = c_mail_start. APPEND lwa_contents TO

lit_contents.

*Mail Text

READ TEXTPOOL sy-repid INTO lt_text_el_tab LANGUAGE sy-

langu.

• ------------------ table begin -----------------------

-

-

---

*

lwa_contents-line = c_table_begin. APPEND lwa_contents

TO lit_contents.

• header line

lwa_contents-line = c_table_row_begin. APPEND

lwa_contents TO lit_contents.

• column title1.

lwa_contents-line = c_table_data_begin. APPEND

lwa_contents TO lit_contents.

READ TABLE lt_text_el_tab INTO lwa_text_el_tab WITH

KEY id = 'I' key = '100'.

lwa_contents-line = '

'. APPEND lwa_contents TO
lit_contents.
MOVE lwa_text_el_tab-entry TO lwa_contents-line.
APPEND lwa_contents TO lit_contents.
lwa_contents-line = '

'. APPEND lwa_contents TO

lit_contents.

lwa_contents-line = c_table_data_end.

APPEND lwa_contents TO lit_contents.

• column title2.

lwa_contents-line = c_table_data_begin. APPEND

lwa_contents TO lit_contents.

READ TABLE lt_text_el_tab INTO lwa_text_el_tab WITH

KEY id = 'I' key = '101'.

lwa_contents-line = '

'. APPEND lwa_contents TO
lit_contents.
MOVE lwa_text_el_tab-entry TO lwa_contents-line.
APPEND lwa_contents TO lit_contents.
lwa_contents-line = '

'. APPEND lwa_contents TO

lit_contents.

lwa_contents-line = c_table_data_end. APPEND

lwa_contents TO lit_contents.

lwa_contents-line = c_table_row_end. APPEND

lwa_contents TO lit_contents.

• content lines

LOOP AT lit_data INTO lwa_data.

lwa_contents-line = c_table_row_begin. APPEND

lwa_contents TO lit_contents.

lwa_contents-line = c_table_data_begin.

APPEND lwa_contents TO lit_contents.

lwa_contents-line = lwa_data-field1.

APPEND lwa_contents TO lit_contents.

lwa_contents-line = c_table_data_end.

APPEND lwa_contents TO lit_contents.

lwa_contents-line = c_table_data_begin.

APPEND lwa_contents TO lit_contents.

lwa_contents-line = lwa_data-field2.

APPEND lwa_contents TO lit_contents.

lwa_contents-line = c_table_data_end.

APPEND lwa_contents TO lit_contents.

lwa_contents-line = c_table_data_begin.

APPEND lwa_contents TO lit_contents.

lwa_contents-line = c_table_row_end.

APPEND lwa_contents TO lit_contents.

• ----------------- table end -------------------------------------*

lwa_contents-line = c_new_line.

APPEND lwa_contents TO lit_contents.

CLEAR lwa_contents.

ENDLOOP.

lwa_contents-line = c_table_end.

APPEND lwa_contents TO lit_contents.

lwa_document_data-obj_descr = text-004.

" this is to get the subject in the mail

lwa_document_data-obj_langu = sy-langu.

lwa_document_data-sensitivty = 'P'.

lwa_document_data-obj_prio = '1'.

lwa_document_data-priority = '1'.

CALL FUNCTION 'SO_RAW_TO_RTF'

TABLES

objcont_old = lit_contents

objcont_new = lit_contents.

Get the receivers details from the respective table and

populate as below in lit_receivers.

lwa_receivers-receiver = mail_id.

lwa_receivers-rec_type = 'U'. " Here we are

using U because the mail_id will be like abc.def@hjk.com

APPEND lwa_receivers TO lit_receivers.

CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'

EXPORTING

document_data = lwa_document_data

document_type = c_doc_type

commit_work = 'X'

TABLES

object_content = lit_contents

receivers = lit_receivers

EXCEPTIONS

too_many_receivers = 1

document_not_sent = 2

document_type_not_exist = 3

operation_no_authorization = 4

parameter_error = 5

x_error = 6

enqueue_error = 7

OTHERS = 8.

IF sy-subrc <> 0.

MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno

WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.

ELSE.

SUBMIT rsconn01 WITH mode = '*' AND RETURN.

ENDIF.

Please give me reward points if this solve your issue.

-Satish

Message was edited by:

Satish Panakala

[Former Member]

Ruby,

i just copied my code. i think it might be confusing you.

This code was worked for me and i was able to get the mail in the correct format.

If it helps don't forget to reward the points.

Thanks,

Satish