module pool

[Former Member]

can anybody send me a sample of module pool program...

Regards,

pandu.

[Former Member]

Hi,

See details:

http://www.thespot4sap.com/Articles/SAP_Design_Dynpro.asp

Reward if useful!

[Former Member]

Hi,

Check these links.

http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F

http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm

http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm

http://sap.mis.cmich.edu/sap-abap/abap09/index.htm

http://www.geocities.com/ZSAPcHAT

http://www.allsaplinks.com/files/using_table_in_screen.pdf

http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm

http://www.sapdevelopment.co.uk/dialog/dialoghome.htm

http://www.sap-img.com/

http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm

http://www.sapgenie.com/links/abap.htm

http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm

You can also check the transaction ABAPDOCU which gives you lot of sample programs.

Also you can see the below examples...

Go to se38 and give demodynpro and press F4.

YOu will get a list of demo module pool programs.

One more T-Code is ABAPDOCU.

YOu can find more examples there.

See the prgrams:

DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement

DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB

http://www.geocities.com/ZSAPcHAT

http://www.allsaplinks.com/files/using_table_in_screen.pdf

REPORT ZBHMOD1 .

DATA:OKCODE1 LIKE SY-UCOMM,

OKCODE2 LIKE SY-UCOMM.

DATA:N1(10) TYPE N,N2(10) TYPE N,RES(12) TYPE N.

MODULE USER_COMMAND_1000 INPUT.

CASE OKCODE1.

WHEN 'NEXT'.

RES = N1 + N2.

SET SCREEN 1001.

WHEN 'CLEA'.

CLEAR:N1,N2.

WHEN 'BACK'.

SET SCREEN '0'.

ENDCASE.

ENDMODULE. " USER_COMMAND_1000 INPUT

MODULE STATUS_1000 OUTPUT.

• SET PF-STATUS 'xxxxxxxx'.

SET TITLEBAR 'TIT1'.

ENDMODULE. " STATUS_1000 OUTPUT

MODULE USER_COMMAND_1001 INPUT.

CASE OKCODE2.

WHEN 'BACK'.

SET SCREEN 1000.

ENDCASE.

ENDMODULE. " USER_COMMAND_1001 INPUT

MODULE STATUS_1001 OUTPUT.

• SET PF-STATUS 'xxxxxxxx'.

SET TITLEBAR 'TIT2'.

ENDMODULE. " STATUS_1001 OUTPUT

FLOW LOGIC:

PROCESS BEFORE OUTPUT.

MODULE STATUS_1000.

*

PROCESS AFTER INPUT.

MODULE USER_COMMAND_1000.

PROCESS BEFORE OUTPUT.

MODULE STATUS_1001.

*

PROCESS AFTER INPUT.

MODULE USER_COMMAND_1001.

**************************************************************************

************************************************************************

2)

REPORT ZBHMOD2.

DATA: OKCODE1 TYPE SY-UCOMM,

OKCODE2 TYPE SY-UCOMM,

ENAME(10) TYPE C,

DNAME(10) TYPE C.

MODULE STATUS_1000 OUTPUT.

• SET PF-STATUS 'xxxxxxxx'.

SET TITLEBAR 'TIT1'.

ENDMODULE. " STATUS_1000 OUTPUT

MODULE STATUS_1001 OUTPUT.

• SET PF-STATUS 'xxxxxxxx'.

SET TITLEBAR 'TIT2'.

ENDMODULE. " STATUS_1001 OUTPUT

MODULE USER_COMMAND_1000 INPUT.

CASE OKCODE1.

WHEN 'BACK'.

SET SCREEN '0'.

WHEN 'NEXT'.

DNAME = ENAME.

SET SCREEN '1001'.

ENDCASE.

ENDMODULE. " USER_COMMAND_1000 INPUT

MODULE USER_COMMAND_1001 INPUT.

CASE OKCODE2.

WHEN 'BACK'.

SET SCREEN '1000'.

ENDCASE.

ENDMODULE. " USER_COMMAND_1001 INPUT

FORM ON_CTMENU_FORM USING ZDEMO1 TYPE REF TO CL_CTMENU.

CALL METHOD ZDEMO1->LOAD_GUI_STATUS

EXPORTING

PROGRAM = 'ZDEMO1'

STATUS = 'ZDEMO1'

MENU = ZDEMO1.

ENDFORM. " ON_CTMENU_FORM

FLOW LOGIC:

PROCESS BEFORE OUTPUT.

MODULE STATUS_1000.

*

PROCESS AFTER INPUT.

MODULE USER_COMMAND_1000.

PROCESS BEFORE OUTPUT.

MODULE STATUS_1001.

*

PROCESS AFTER INPUT.

MODULE USER_COMMAND_1001.

*************************************************************

Every Screen has a pbo and a pai.

Screen elements are the textbox, buttons, radio buttons and check boxes .....

If we want to pass data from a abap program to a screen element, we have to create a variable with the name we have given in the screen.So whatever the value is present in that variable is reflected on to the screen element.

Here is an example :

Using subscreens and some of the screen elements

REPORT demo_dynpro_subscreens.

DATA: ok_code TYPE sy-ucomm,

save_ok TYPE sy-ucomm.

DATA: number1(4) TYPE n VALUE '0110',

number2(4) TYPE n VALUE '0130',

field(10) TYPE c, field1(10) TYPE c, field2(10) TYPE c.

CALL SCREEN 100.

MODULE status_100 OUTPUT.

SET PF-STATUS 'SCREEN_100'.

ENDMODULE.

MODULE fill_0110 OUTPUT.

field = 'Eingabe 1'(001).

ENDMODULE.

MODULE fill_0120 OUTPUT.

field = field1.

ENDMODULE.

MODULE fill_0130 OUTPUT.

field = 'Eingabe 2'(002).

ENDMODULE.

MODULE fill_0140 OUTPUT.

field = field2.

ENDMODULE.

MODULE cancel INPUT.

LEAVE PROGRAM.

ENDMODULE.

MODULE save_ok INPUT.

save_ok = ok_code.

CLEAR ok_code.

ENDMODULE.

MODULE user_command_0110 INPUT.

IF save_ok = 'OK1'.

number1 = '0120'.

field1 = field.

CLEAR field.

ENDIF.

ENDMODULE.

MODULE user_command_0130 INPUT.

IF save_ok = 'OK2'.

number2 = '0140'.

field2 = field.

CLEAR field.

ENDIF.

ENDMODULE.

MODULE user_command_100 INPUT.

CASE save_ok.

WHEN 'SUB1'.

number1 = '0110'.

WHEN 'SUB2'.

number1 = '0120'.

CLEAR field1.

WHEN 'SUB3'.

number2 = '0130'.

WHEN 'SUB4'.

number2 = '0140'.

CLEAR field2.

ENDCASE.

ENDMODULE.

• flow logic for screen 100

PROCESS BEFORE OUTPUT.

MODULE STATUS_100.

CALL SUBSCREEN: AREA1 INCLUDING SY-REPID NUMBER1,

AREA2 INCLUDING SY-REPID NUMBER2.

PROCESS AFTER INPUT.

MODULE CANCEL AT EXIT-COMMAND.

MODULE SAVE_OK.

CALL SUBSCREEN: AREA1,

AREA2.

MODULE USER_COMMAND_100.

• flow logic for screen 110

PROCESS BEFORE OUTPUT.

MODULE FILL_0110.

PROCESS AFTER INPUT.

MODULE USER_COMMAND_0110.

• flow logic for screen 120

PROCESS BEFORE OUTPUT.

MODULE FILL_0120.

PROCESS AFTER INPUT.

• flow logic for screen 130

PROCESS BEFORE OUTPUT.

MODULE FILL_0130.

PROCESS AFTER INPUT.

MODULE USER_COMMAND_0130.

• flow logic for screen 140

PROCESS BEFORE OUTPUT.

MODULE FILL_0140.

PROCESS AFTER INPUT.

Regards,

Priyanka.

[Former Member]

SAP has a transaction called BIBS which has demo dynpros with some explanations... the code is in function group EXAMPLE_ENTRY_SCREEN.

[Former Member]

Hi,

Module pool programs are created in abap development work bench (TCODE: SE80).

Here we can do all the works whatever you can do in abap.

Module pool programs are also called dialog programs.

The module Pool are reports prepared for different screens and to manage the sequeence of events of these screens, in the transaction SE80 you can see all the dynpros that you have for this kind of report, add new ones, add all types of element to the report.

Process Before Output is the part of the dynpro code that is precessed before the user can do anithing with the data in the screen

Process After Input is the part of the dynpro code that is preocessed after the interaction with the user.

module pool programs are excuited using Tcodes

please check out the link below it will help you in learning module pool programs

http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb2d5a358411d1829f0000e829fbfe/content.htm

http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F

http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm

http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm

http://sap.mis.cmich.edu/sap-abap/abap09/index.htm

http://www.geocities.com/ZSAPcHAT

http://www.allsaplinks.com/files/using_table_in_screen.pdf

http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm

http://www.sapdevelopment.co.uk/dialog/dialoghome.htm

http://www.sap-img.com/

http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm

http://www.sapgenie.com/links/abap.htm

http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm

********please reward points if the information is helpful to you*********

[Former Member]

Hi

Check the below link:

http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F

http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm

http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm

http://sap.mis.cmich.edu/sap-abap/abap09/index.htm

http://www.geocities.com/ZSAPcHAT

http://www.allsaplinks.com/files/using_table_in_screen.pdf

http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm

http://www.sapdevelopment.co.uk/dialog/dialoghome.htm

http://www.sap-img.com/

http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm

http://www.sapgenie.com/links/abap.htm

http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm

You can also check the transaction ABAPDOCU which gives you lot of sample programs.

Also you can see the below examples...

Go to se38 and give demodynpro and press F4.

YOu will get a list of demo module pool programs.

One more T-Code is ABAPDOCU.

YOu can find more examples there.

See the prgrams:

DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement

DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB

http://www.geocities.com/ZSAPcHAT

http://www.allsaplinks.com/files/using_table_in_screen.pdf

<b>Reward points if useful</b>

Regards

Ashu

[Former Member]

" Dialog Development Info - Example code and information on various areas of Dialog development

' Here is the  link   creating  of  Dialog  module   with  screen  shots  for it  .

http://www.sapdevelopment.co.uk/dialog/dialoghome.htm

" Table Control - Example code and information on various areas of table control  
" development

Create Table Control

· Step 1 (Create new structure for table control)

Type is name of structure (ZTC_EKKO) and press create

Enter the fields that you want to display in the table control. Example uses fields from EKKO.
Now save and activate it!
· Step 2 (Create Program)
Goto transaction SE80(Object Navigator) -> Repository Browser -> Program.

Enter your program name, please ensure that is begins with SAPMZ…… as this is a module pool (dialog program).

Press enter to create, and press yes!

Ensure that you create a top include, and press Enter.

Accept the name created for the top include.

Press Enter.

Press Save

· Step 3 (Create TOP include)

Double click on the top include and enter following ABAP code:

Tables: ZTC_EKKO.

controls: tc100 type tableview using screen 100.

data: ok_code type sy-ucomm.

data: it_ekko type standard

table of ZTC_EKKO initial size 0,

wa_ekko type ZTC_EKKO.

data: ok_code type sy-ucomm.

Press Save and Activate

· Step 4 (Create screen)

Right click the program to create a screen 100 for the dialog. Enter Short description, set screen type to Normal and enter 0 or blank into Next screen. Then move to Element List tab and enter the OK code as OK_CODE (i.e. the same as what you declared in the top include with data: ok_code type sy-ucomm).

· Step 5 (Create table control)

Press the Layout button to bring up the screen painter editor.

Press table control button and drag it on to the screen, enter the name of table control created in TOP include (TC100). Now press the yellow button for attributes and set the table control as below options

· Step 6 (Populate table control )

Press the orange button (Fields). On the next screen enter ZTC_EKKO and press the ‘Get from Dict’ button. Select the fields you want (all) and press enter. Now drag them onto your Table Control.

Below is the result, there will been syntax errors if we check now! So Save and go back into the flow logic tab.

· Step 7 (Create flow control )

Within the flow logic of screen 100 and create two modules, one to select the data from the database and the other to move the selected fields into the table control. Also insert the two loop statements to populate and retrieve the lines of the table control.

PROCESS BEFORE OUTPUT.

• MODULE STATUS_0100.

module data_retrieval.

loop at it_ekko into wa_ekko with control TC100.

module populate_screen.

endloop.

*

PROCESS AFTER INPUT.

loop at it_ekko.

endloop.

• MODULE USER_COMMAND_0100.

Double click the module data_retrieval to create and click yes to get past the popup. Ensure that a new include is created to hold all the PBO modules (default). Press enter.

Select 10 rows of data from the EKKO table and load into the internal table it_ekko. Go back to the flow logic to load this data into the Table Control.

*----

---

*

***INCLUDE MZ_TCONTROL_DATA_RETRIEVALO01 .

*----

---

*

*& Module data_retrieval OUTPUT

*&----

---

*

MODULE data_retrieval OUTPUT.

• select data from ekko table

SELECT ebeln bukrs bstyp bsart

bsakz loekz statu aedat

UP TO 10 ROWS

FROM ekko

INTO CORRESPONDING FIELDS OF TABLE it_ekko.

ENDMODULE. " data_retrieval OUTPUT

Double click the module populate_screen to create. Now move the values in this loop from the wa_ekko into the Table Control with the move-corresponding statement.

MODULE populate_screen OUTPUT.

DATA: ld_line TYPE i.

• Set which line of table is a top of displayed table control

IF sy-stepl = 1.

tc100-lines =

tc100-top_line + sy-loopc - 1.

ENDIF.

• move fields from work area to scrren fields

MOVE-CORRESPONDING wa_ekko TO ztc_ekko.

ENDMODULE. " populate_screen OUTPUT

· Step 8 (Create transaction )

Now create a transaction to test the table control program. Right click the Program and select create-> transaction.

· Step 9 (Execute transaction )

Execute transaction ZTC

reward points if it is usefull ...

Girish

[Former Member]

Hi,

Screen Painter

http://help.sap.com/saphelp_47x200/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm

Menu Painter

http://help.sap.com/saphelp_nw04/helpdata/en/d1/801ce8454211d189710000e8322d00/frameset.htm

For Table Control Creation

1) Screen tables

A table can be created in transaction. These tables, when designed on the screen are called as SCREEN TABLES.

These are of two types.

Table Controls and Step loops

These tables are treated as Loops.

2)Features of Table Controls

Data is displayed in the form of table.

Table control gives user the feeling of an actual table.

You can scroll through the table vertically as well as horizontally.

You can select rows and columns.

You can resize the with of columns.

You can have separator lines between rows and columns.

Automatic resizing of the table when the user resizes the window.

You can update information in the table control and it can be updated in the database table by writing code for it.

3)Steps for creating table control

Declaration of table control in module pool program.

Designing of table controls on the screen.

Passing data to table control in flow logic.

4)Declaration of TC in MPP

syntax:

controls <name of table control> type tableview using screen <escreen no.f>.

5)Designing Table control on screen

Click on Table in Control bar and place it on the screen. You can adjust the length and width of the Table Control.

Name the table control.(same name as given in data declaration).

From dictionary object OR from program fields select the fields and place them in the table control

6)Passing data to table control

Usually transfer of data from program to screen is automatic.

In case of TC, you need to explicitly transfer the data to table control.

ABAP/4 provides Loop statement, which is associated with flow logic to transfer the data.

7)Passing of data contd.

PBO.

Loop at <name of internal table> with control <name of table control> cursor <scroll variable>.

modulecc.

Endloop.

PAI.

Loop at < name of internal table>.Endloop.

8)Scroll variables

Top_line : the row of table where the screen display starts.

Current_line : the row currently being processed inside a loop.

9)Transfer of data from prg to TC.

With eLoop at cf statement, the first row is placed in the header of internal table.

If any module is specified between Loop and End loop, it will be executed. In this module, generally we will be assigning this internal table fields to table control screen fields.

The row in internal table is transferred to the TC as stated in the eLoop atc..f statement.

The system encounters the eEndloopf statement and control is passed back to the next line of internal table.

In the same way all the records of the internal table are passed to the TC.

Have a look at these good links-

http://www.allsaplinks.com/dialog_programming.html

http://sap.mis.cmich.edu/sap-abap/abap09/

http://www.sapdevelopment.co.uk/dialog/dialoghome.htm

http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm

http://sap.mis.cmich.edu/abap-00/

http://www.allsaplinks.com/files/using_table_in_screen.pdf

http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm

http://www.sapgenie.com/links/abap.htm

http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm

http://www.sapdevelopment.co.uk/dialog/dialoghome.htm

http://help.sap.com

http://www.sapgenie.com/abap/example_code.htm

http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm

http://www.allsaplinks.com/dialog_programming.html

http://www.sapbrain.com/TUTORIALS/default.html

http://www.sappoint.com/abap/spmp.pdf

http://sappoint.com/abap.html

http://www.sap-img.com/abap.htm

http://sap.ittoolbox.com/code/archives.asp?i=10&t=450&a=t

http://www.sapdevelopment.co.uk/dialog/dialoghome.htm

http://www.sap-img.com/abap/

http://www.sapdevelopment.co.uk/dialog/dialoghome.htm

http://www.sap-img.com/

http://www.sappoint.com/faq/faqdiapr.pdf

http://www.allsaplinks.com/dialog_programming.html

Reward if useful

Thanks

[Former Member]

DEMO_DYNPRO_TABCONT_LOOP